The detector includes an integrated RF module, which thanks to the CONNECTED function allows you to wirelessly link two or more FireSAFE detectors and thus create an interconnected wireless network. In such a case, if one of the devices triggers an alarm, it will send a radio signal and all other FireSAFE units connected in the network will also respond to the alarm.

A smart central control unit, the Hub FireSAFE, can be added to the wireless network. These units then allow convenient setup and control of the comprehensive FireSAFE system, even remotely, thanks to an internet connection, using the intuitive free mobile app of the same name (for Android and iOS) designed for smartphones, tablets, and more. The Hub monitors the activity of all connected FireSAFE detectors and devices and immediately informs the system user via push notifications in case of detected danger.

The SAFE 10YHT – RF thermistor fire temperature detector was designed for a wide range of applications and environments where reliable fire detection cannot be ensured using conventional technologies. It provides an effective solution for detecting fires with a rapid rise in temperature during combustion or for slowly developing fires that generate a temperature increase in the monitored area. For detection, the detector uses intelligent predictive algorithm technology in combination with a Class A1 thermistor sensor, structurally designed outside the housing to ensure immediate alarm response without further delay.

In fire detection systems in residential buildings, the priority is to inform people in a timely manner about an imminent real danger. AI SAFE microprocessor was developed based on a detailed analysis of the burning properties of materials and operates with a predictive algorithm that compares data from a thermistor sensor and filters out potential false alarm possibilities. It evaluates the measured temperature in real time, comparing it with the rate of increase and predictive patterns for reliable and timely warning of potential fire hazards. If the dynamics of the data pattern match the actual parameters of a developing fire temperature, the detector immediately triggers the fire alarm.

In the event that the set temperature limit is exceeded during detection, the detector will automatically activate a loud acoustic alarm signal at 85 dB, accompanied by the flashing of a red LED indicator to signify a fire alarm. This is intended to attract the attention of individuals in the building through a high noise level and intense LED signaling that a fire has occurred in a part of the facility. The purpose of the fire alarm is then to prompt an immediate response to the alarm event or to move people from the site of the emergency to a safe zone.

The detector features a combined button with TEST and MUTE functions, which is designed both for testing and verifying the correct operation of the device, as well as for temporary silencing of the alarm. In the event that you know the cause of the fire alarm activation and need to silence the loud acoustic siren signal, there is no need to go through any complicated procedure to reach the alarm itself in order to silence it using the button. SIC technology allows you to remotely silence the acoustic signal by pressing any button on a standard IR remote control (most remote controls for household appliances, for example for a TV).

The electronic components and printed circuit board of the detector are equipped with an insulating and protective varnish layer with IZOVAX nanoparticles, and thanks to innovative thermistor sensing technology, unlike conventional optical fire detectors, the device can be installed in a wide range of complicated environments (bathrooms, drying rooms, saunas, swimming pools, kitchens, garages, boiler rooms, workshops, warehouses, laboratories, etc.), where humidity, vapors, chemical substances, dust, or the presence of smoke particles could affect the function of conventional optical fire detectors.

Power is provided by an integrated 3V lithium battery (built-in, non-replaceable) guaranteeing an exceptionally long detector operation of more than 10 years. Battery operation enables quick and easy installation and ensures proper functioning of the smoke and fire detector for more than 10 years from activation. The battery is activated when the detector is placed and secured in the mounting bracket. After 10 years of protection, with a 30-day advance notice, the detector will announce the end of its service life and automatically alert you that it needs to be replaced. The extended 10-year warranty covers both the battery and the device itself.