FireSAFE / Fire extinguishing sprays

Test spray for smoke alarms
SAFE 220

User manual

Updated 21 October 2026

Product page Datasheet (PDF)
SAFE 220 test spray for smoke alarms

SAFE 220 test spray is used to verify the functionality of smoke alarms. The test button on a smoke alarm does not check the sensor itself; it only verifies the condition of the batteries, the functioning of the electronic circuits and the correct triggering of the acoustic and visual signals. The actual function of the sensor can only be verified with a calibrated aerosol that faithfully simulates the presence of smoke.

220 mltest aerosol volume
More than 30tests from one can
1–2 saerosol dispensing time
0 to +50 °Coperating and storage temperature
133 gproduct weight
Tests all smoke alarms
Calibrated aerosol simulating fire smoke particles
Lowest cost per test
For more than 30 tests
Environmentally friendly
Safe overall
Sensor and device operability test
Quick and easy to use

Foreword

General

This user manual describes the function, principle and use of the SAFE 220 test spray for smoke alarms (hereinafter the “spray”). Read the manual carefully before using the spray and keep it for future reference.

Safety instructions

The following signal words may appear in the user manual:

Signal wordMeaning
NEBEZPEČÍIndicates a high potential hazard which, if not avoided, may result in death or serious injury.
VAROVÁNÍIndicates a medium or low potential hazard which, if not avoided, could result in minor or moderate injury.
UPOZORNĚNÍIndicates a potential risk which could lead to property damage, data loss, reduced performance or an unpredictable result.
TIPProvides methods to help you solve a problem or save time.
POZNÁMKAProvides additional information, such as emphasis or a supplement to the text.

Revision history

VersionRevision contentRelease date
V1.0.0First release.September 2026
V1.0.1Colours according to the FireSAFE brand (red).October 2026
V1.0.2Text edit.October 2026

Privacy notice

As a user of the device or a data controller, you may collect the personal data of others, such as their face, fingerprints and licence plate number. You must comply with local privacy protection laws and regulations in order to protect the legitimate rights and interests of other people by taking measures which include, but are not limited to: providing clear and visible identification to inform people of the existence of the monitored area and providing the required contact information.

About the manual

Important precautions and warnings

This section contains information on correct handling of the product, prevention of risks and prevention of damage to property. Read it carefully before using the spray and follow the instructions provided while using it.

Safe use guidelines

UPOZORNĚNÍ

Functional elements

The SAFE 220 test spray consists of a seamless cylindrical can made of high-quality drawn aluminium, which ensures high durability and a long service life. The surface of the can is covered with a durable label with text and graphic information, including instructions for use. The upper part of the can has a conical top in which a valve is firmly fitted, followed by a plastic nozzle.

The spray is activated by simply pressing the nozzle, which releases the test aerosol. The total discharge time is approximately 75 s.

Principle of operation

The test button on a smoke alarm does not check the sensor itself; it only verifies the condition of the batteries, the functioning of the electronic circuits and the correct triggering of the acoustic and visual signals. Because the service life of the sensors in fire alarms can vary and is often unpredictable, manufacturers recommend regularly verifying their correct function using a special calibrated aerosol that faithfully simulates the presence of smoke.

Thanks to the specially developed composition of the aerosol particles in the SAFE 220 test spray, it is possible to faithfully imitate a wide range of real fire symptoms. The aerosol verifies the correct detection function of both optical and ionisation sensors in fire alarms and at the same time checks that their electronics and the whole system work reliably. It is the most widespread professional testing method, recognised worldwide and recommended by leading fire alarm manufacturers.

If you have bought a smoke alarm to protect yourself and your loved ones, we recommend checking the sensor with the SAFE 220 test spray every six months.

Alarm test procedure

  1. Shake the spray thoroughly before use.
  2. Point the nozzle at the sensor's inlet openings from a minimum distance of 50 cm.
  3. Briefly (1–2 seconds) press the nozzle to release a dose of test aerosol – do not use too much and do not spray too close to the detector.
  4. The alarm should trigger (acoustic and visual signalling) within 1 to 20 seconds.
  5. After verifying the function, silence the alarm in the usual way (using the TEST/Silence button on the alarm) and briefly ventilate the area.

What to do if the alarm does not respond

If the alarm does not trigger after the first attempt, repeat the test. If the repeated test does not trigger the alarm either, check the condition of the alarm's batteries or consider replacing it, as it may be faulty.

Storage

Storage temperature0 °C to +50 °C
Storage humidity5 % to 95 % RH, non-condensing

The test spray can is a pressurised container (UN 1950 – aerosols). Store it out of direct sunlight, in a dry place within the stated temperature range, and do not expose it to temperatures above +50 °C.

Technical specifications

Product dimensions

Dimensions of the SAFE 220 test spray – 50 × 160 mm
Dimensions of the SAFE 220 test spray (50 × 160 mm)
Testing
Test kit forSmoke alarms
Carrying out the testPerformed by releasing test gas towards the detector
Gas dispensing time1–2 s
Kit capacityMore than 30 tests
Volume and packaging
Volume220 ml
Product dimensions50 × 160 mm
Product weight133 g
Number of pieces per carton12 pcs
Carton dimensions208 × 180 × 160 mm
Carton weight1.74 kg
Environment
Operating temperature0 °C to +50 °C
Operating humidityUp to 95 % RH, non-condensing
EnvironmentEnvironmentally friendly
General
UN number1950
Declaration of ConformityCE
TestedEQC
EAN code0703123017473
WarrantyConsumer product – see chapter Warranty

Package contents

  1. SAFE 220 test spray (220 ml) with removable protective nozzle cap – 1 pc

Safety notices

Warranty

The SAFE 220 test spray is a consumable product with a limited life determined by the capacity of the can (more than 30 tests) and the storage conditions given in the chapter Storage. The warranty period will be provided by your seller or by SAFE HOME europe customer support.

In the event of problems with the appliance you are using the spray on, contact its manufacturer; in the event of problems with the spray itself, contact SAFE HOME europe technical support.

Need help?

SAFE HOME europe technical support:
E-mail: info@safe-home.eu  · Telephone: (+420) 581 222 262
Web: www.smart-safe.eu