SAFE 750 MAX is a universal 750 ml fire extinguishing spray with a special new-generation extinguishing agent – in addition to class A (solids), class F (oils and fats) fires and live electrical equipment up to 1000 V, it also deals with incipient fires of lithium batteries up to 100 Wh (vacuum cleaners, e-bikes, scooters, drones, phones). It also works in frost down to −20 °C.
Foreword
General
This user manual describes the functions, use and safe handling of the SAFE 750 MAX fire extinguishing spray (hereinafter the “spray”). The spray is a passive pressurised product intended for first-response action against incipient fires – it requires no power supply, pairing or mobile app. Read the manual carefully before use and keep it for future reference.
Safety instructions
The following signal words may appear in the user manual:
| Signal word | Meaning |
|---|---|
| NEBEZPEČÍ | Indicates a high potential hazard which, if not avoided, may result in death or serious injury. |
| VAROVÁNÍ | Indicates a medium or low potential hazard which, if not avoided, could result in minor or moderate injury. |
| UPOZORNĚNÍ | Indicates a potential risk which could lead to property damage, data loss, reduced performance or an unpredictable result. |
| TIP | Provides methods to help you solve a problem or save time. |
| POZNÁMKA | Provides additional information, such as emphasis or a supplement to the text. |
Revision history
| Version | Revision content | Release date |
|---|---|---|
| V1.0.0 | First release. | September 2026 |
| V1.0.1 | Colours according to the FireSAFE brand (red). | October 2026 |
About the manual
- The user manual serves as a reference only. Minor differences may occur between the information provided and the product.
- We are not liable for damage resulting from use of the product in a manner that is not in accordance with the instructions in the user manual.
- The manual will be updated in line with the current laws and regulations of the relevant countries. The manual is for information purposes only. The electronic and printed versions (the label on the spray) may differ in minor details – in the event of a discrepancy, the information on the spray label prevails.
- All designs may be changed without prior written notice. As a result of product updates, certain differences may appear between the product and the information in the manual.
- Printing errors or deviations may occur in the description of functions and technical data. In case of doubt or dispute, we reserve the right of final interpretation.
- All trademarks, registered trademarks and company names in the manual are the property of their respective owners.
- If any problems occur while using the product, visit our website or contact customer service.
Important precautions and warnings
This section contains information on the correct handling of the product, risk prevention and prevention of property damage. Read it carefully before using the device and follow the instructions provided while using it.
General rules for pressurised containers
- The container is under pressure – it may burst if heated. Protect it from sunlight and do not expose it to temperatures above +50 °C.
- Do not puncture it or throw it into a fire, even after the contents have been used up.
- Keep away from heat, hot surfaces, sparks, open flames and other sources of ignition. No smoking near it.
- Keep out of the reach of children and always store the container upright.
- The spray is not intended for refilling.
Functional elements
- Pressure container (bottle) with extinguishing agent pressurised by nitrogen – single-use, not intended for refilling.
- Safety pin (red) in the spray head – prevents accidental pressing of the trigger; it must be removed before use.
- Trigger (green) on the head – activates the spray when pressed.
- Nozzle / sprayer integrated in the head – directs the stream of extinguishing agent onto the source of the fire.
- Label with fire class pictograms, instructions for use (CZ/SK/PL) and safety symbols.
- Lithium battery pictogram on the label – indicates the extended extinguishing capability, which also covers incipient fires of lithium batteries up to 100 Wh.
- Expiry date and production data (batch) marked on the label / bottom of the container.
Principle of operation
The SAFE 750 MAX extinguishing agent is based on BETA EFFEM foam concentrate. The agent is released under the pressure of a propellant gas (nitrogen/N2) and turns into a fine foam aerosol as it leaves the nozzle.
The aerosol covers the surface of the burning material, cuts off the oxygen supply (smothering effect) and at the same time removes heat (cooling effect), thereby stopping the combustion. The spray is intended for initial, small fires of the following classes:
- A – fires of solid materials (wood, paper, straw, rubber, coal, textiles, etc.)
- F – fires of edible oils and fats (vegetable and animal)
- E – fires of live electrical equipment up to 1000 V
- Lithium batteries – incipient fires of lithium batteries up to 100 Wh (e.g. power banks, e-bikes, scooters, drones, mobile phones).
On contact with the affected battery cells, the agent triggers an anticatalytic reaction accompanied by intensive wetting of the surface, isolation of the oxygen supply and a nitrogen-blanketing effect. The result is immediate active cooling of the affected area, which slows down or stops the spread of thermal decomposition of the battery.
Use
Follow four simple steps:
- Remove the red safety pin from the spray head.
- Approach the fire to a safe distance – for live electrical equipment, keep at least this distance from the fire 1 m.
- Aim the sprayer at the base of the flames, not at the flames themselves.
- Press the green trigger on the spray head and extinguish with a continuous stream – the agent lasts up to 25 s.
- After the fire is out, keep monitoring the site – it may re-ignite.
Apply the agent directly to the battery cells. Even after the flame has visibly been extinguished, continue to cool the battery and, if necessary, spray it again – lithium cells can reignite even after apparently being extinguished owing to internal thermal decomposition (so-called thermal runaway). Do not use the affected device any further and dispose of it safely.
When not to use
- On an already developed, extensive fire – in such a case, leave the area immediately, call the fire brigade (emergency line 150 / 112) and do not use the spray.
- On fires of flammable gases and liquids – the spray is intended only for small incipient fires of classes A, F and electrical equipment up to 1000 V, or lithium batteries up to 100 Wh.
- On live electrical equipment above 1000 V.
- If the safety pin (cap) is damaged or missing, the expiry date marked on the spray has passed, the spray has already been used or shows signs of damage – dispose of such a spray (see the Maintenance and inspection chapter).
- The spray does not replace a portable fire extinguisher according to EN 3 and is not intended for refilling.
Storage and placement
Store and use the spray within the temperature range −20 °C to +50 °C at 5–95 % RH without condensation, always in an upright position. Protect it from direct sunlight and heat sources.
Place it in a visible, easily accessible and permanent location – at home, in the kitchen, garage, workshop, office, car, boat or caravan – so that it is immediately at hand in case of fire. Thanks to its frost resistance (down to −20 °C) it is also suitable for storage in a vehicle over the winter.
Maintenance and inspection
The SAFE spray requires no servicing or pressure top-up – it is not a fire extinguisher according to EN 3 and has no pressure gauge. At least once every six months, check:
- that the safety pin (or protective cap) is intact and present,
- the expiry date marked on the label,
- the mechanical condition of the container – corrosion, dents, leakage of contents.
Dispose of the spray if: the safety pin/cap is damaged or missing, the expiry date has passed, it has been used, or it shows signs of damage. Do not throw it into general municipal waste – hand it in for recycling in accordance with local regulations.
Technical specifications
| Extinguishing | |
| Fire classes | A, F, E |
| Extinguishing performance |
|
| Range | 3–4 m |
| Discharge time | 25 s |
| Extinguishing agent and propellant | |
| Extinguishing agent | BETA EFFEM foam concentrate |
| Propellant | Nitrogen / N2 |
| Pressure (when full) | 1.0 MPa at 25 °C |
| Dimensions and weight | |
| Product dimensions | 74 × 310 mm |
| Product weight | 1000 g |
| Environment and storage | |
| Operating and storage temperature | −20 °C to +50 °C |
| Humidity | 5 % to 95 % RH, non-condensing |
| Recommended holder | SAFE 75C / SAFE 75F |
| General | |
| Declaration of Conformity | CE |
| Tested | MPA Dresden GmbH, EQC |
| EAN code | 0703123018289 |
| Warranty | according to the seller's warranty terms |
Package contents
- SAFE 750 MAX fire extinguishing spray – 1 pc
The mounting bracket (SAFE 75C (black) or SAFE 75F (fluorescent green, for 750 ml sprays)) is sold separately and is not included in the spray package.
Safety notices
- The container is under pressure – it may burst if heated. Protect it from sunlight and do not expose it to temperatures above +50 °C.
- Do not puncture it or throw it into a fire, even after the contents have been used up.
- Keep away from heat, hot surfaces, sparks, open flames and other sources of ignition. Do not smoke near it.
- Keep out of the reach of children. Store and use the container upright.
- The spray is not intended for refilling.
- When extinguishing live electrical equipment up to 1000 V, keep a distance of at least 1 m from the fire.
- It is not a fire extinguisher according to EN 3 – it does not replace mandatory equipment required by fire protection regulations.
- After use, after the expiry date has passed, or if the spray is damaged or the pin/cap is missing, do not throw the spray into general municipal waste – dispose of it in accordance with local regulations (recycling).
Warranty
The SAFE 750 MAX fire extinguishing spray is covered by a warranty to the extent set by the seller and applicable legislation, from the date of sale. The warranty does not cover defects caused by incorrect storage, mechanical damage or use of the product contrary to the instructions in this manual, nor a used or expired spray.
In case of problems, contact technical support – most situations can be resolved remotely.
Need help?
SAFE HOME europe technical support:
E-mail: info@safe-home.eu · Telephone: (+420) 581 222 262
Web: www.smart-safe.eu