SAFE 75C bracket in black is specially designed for SAFE 750 ml fire extinguishing sprays and is intended for their safe and convenient mounting in a house, car, boat, office, kitchen, caravan, etc. The robust, sturdy and lightweight plastic bracket allows the fire extinguishing spray to be installed in a visible, easily accessible and permanent place so that it can be used quickly and easily in the event of a fire.
Foreword
General
This user manual describes the installation and use of the SAFE 75C bracket for fire extinguishing sprays (hereinafter the “bracket”). Read the manual carefully before using the bracket and keep it for future reference.
Safety instructions
The following signal words may appear in the user manual:
| Signal word | Meaning |
|---|---|
| NEBEZPEČÍ | Indicates a high potential hazard which, if not avoided, may result in death or serious injury. |
| VAROVÁNÍ | Indicates a medium or low potential hazard which, if not avoided, could result in minor or moderate injury. |
| UPOZORNĚNÍ | Indicates a potential risk which could lead to property damage, data loss, reduced performance or an unpredictable result. |
| TIP | Provides methods to help you solve a problem or save time. |
| POZNÁMKA | Provides additional information, such as emphasis or a supplement to the text. |
Revision history
| Version | Revision content | Release date |
|---|---|---|
| V1.0.0 | First release. | September 2026 |
| V1.0.1 | Colours according to the FireSAFE brand (red). | October 2026 |
| V1.0.2 | Technical specifications corrected according to the manufacturer's documents. | October 2026 |
| V1.0.3 | Compatible sprays specified. | October 2026 |
Privacy notice
As a user of the device or a data controller, you may collect the personal data of others, such as their face, fingerprints and licence plate number. You must comply with local privacy protection laws and regulations in order to protect the legitimate rights and interests of other people by taking measures which include, but are not limited to: providing clear and visible identification to inform people of the existence of the monitored area and providing the required contact information.
About the manual
- The user manual serves as a reference only. Minor differences may occur between the information provided and the product.
- We are not liable for damage resulting from use of the product in a manner that is not in accordance with the instructions in the user manual.
- The manual will be updated in line with the current laws and regulations of the relevant countries. For detailed information, see the printed user manual, scan the QR code or visit our website. The manual is for information purposes only. The electronic and printed versions may differ in minor details.
- All designs may be changed without prior written notice. As a result of product updates, certain differences may appear between the product and the information in the manual. The latest version of supplementary documentation is available from customer service.
- Printing errors or deviations may occur in the description of functions, operations and technical data. In case of doubt or dispute, we reserve the right of final interpretation. If the manual (in PDF format) cannot be opened, update your reader software or try another common reader.
- All trademarks, registered trademarks and company names in the manual are the property of their respective owners.
- If any problems occur while using the holder, visit our website, or contact your supplier or customer service.
- In case of ambiguity or dispute, we reserve the right of final interpretation.
Important precautions and warnings
This section contains information on the correct handling of the product, risk prevention and prevention of property damage. Read it carefully before using the holder and follow the instructions provided while using it.
Installation requirements
- Before drilling, make sure there are no electrical wires, water pipes or gas pipes at the mounting location.
- Install the holder on a load-bearing surface and use fasteners appropriate to the type of surface.
Description
The SAFE 75C bracket in black is specially designed for SAFE 750 ml fire extinguishing sprays and is intended for their safe and convenient mounting in a house, car, boat, office, kitchen, caravan, etc.
The robust, sturdy and lightweight plastic holder allows the fire extinguishing spray to be installed in a visible, easily accessible and permanent location, so that it can be used easily and quickly in case of fire. In a fire we often act under pressure and forget where we put the fire extinguishing spray – a permanent, known storage location therefore significantly shortens the time needed to respond.
Compatible sprays
The SAFE 75C bracket is intended for SAFE 750 ml fire extinguishing sprays – SAFE 750 RED, SAFE 750 MAX a SAFE 750 LITH. All three have an identical canister (diameter 74 mm, height 310 mm); the inner diameter of the bracket is 73 mm, so the spray is held firmly in the bracket.
Choosing the location
Place the holder with the spray in a visible and easily reachable location – typically near the kitchen, garage, or the exit from the room or flat – so that the spray is immediately at hand in case of fire. Choose a permanent location that all residents of the household will remember, and mount the holder at a height at which the spray is comfortably reachable even for shorter people.
Mounting
- Choose a suitable installation location according to the chapter Choosing the location and hold the holder against the intended spot.
- Mark the position of the holder's mounting holes on the surface.
- Drill the holes and insert wall plugs appropriate to the type of surface (masonry, wood, metal, etc.).
- Screw the holder to the surface using suitable screws.
Inserting and removing the spray
Insert the SAFE 750 ml fire extinguishing spray (RED, MAX or LITH) into the bracket holder from above so that the canister sits firmly and securely in it. When you need the spray, simply pull it upwards out of the bracket.
Technical specifications
| Dimensions and weight | |
| Height | 265 mm |
| Width | 86 mm |
| Inner diameter | 73 mm |
| Weight | 85 g |
| Construction | |
| Material | Plastic |
| Colour | Black |
| Environment | |
| Frost resistance | Do −20 °C |
| Compatibility | |
| Compatible spray | SAFE 750 ml – RED, MAX, LITH |
| General | |
| EAN code | 0703123018364 |
| Warranty | See chapter Warranty |
Package contents
- SAFE 75C mounting bracket – 1 pc
Safety notices
- Read these instructions carefully before installation and keep them for future reference.
- Install the holder only on a solid, load-bearing surface; choose fasteners according to the type of surface.
- Before drilling, check that there are no hidden electrical wiring, water pipes or gas pipes at the mounting location.
- After installation, always check that both the holder and the inserted spray are firmly and securely mounted and there is no risk of them falling.
- The bracket is intended exclusively for SAFE 750 ml fire extinguishing sprays (RED, MAX, LITH); do not use it for other canisters.
- Check the condition of the holder and the mounted spray regularly, especially after mechanical stress (in a vehicle, on a boat, etc.).
- Do not dispose of the product with general municipal waste – hand it in for recycling in accordance with local regulations.
Warranty
The SAFE 75C bracket is covered by a warranty to the extent set by applicable legislation and the seller's terms and conditions. The warranty period will be communicated to you by the seller or SAFE HOME europe customer support. The warranty does not cover defects caused by incorrect installation, mechanical damage or failure to follow the instructions in this manual.
In case of problems with the holder, first contact technical support – most situations can be resolved remotely.
Need help?
SAFE HOME europe technical support:
E-mail: info@safe-home.eu · Telephone: (+420) 581 222 262
Web: www.smart-safe.eu