Product Manuals / Indoor Security

SAFE swivel mount for indoor motion detectors
SAFE Bracket PIR (SAFE 11010)

User Manual

Updated 20. 8. 2026

Product Page
SAFE Bracket PIR swivel mount (SAFE 11010)

Bracket PIR – SAFE 11010 is a professional adjustable mounting bracket designed for PIR detectors from the Motion Guard and Motion Guard Plus series. Its robust construction combined with exceptional adjustment flexibility makes it an indispensable accessory for any integrator of a modern SAFE wireless security system.

±180°rotation – ceiling mount
±90°rotation – wall mount
−80° to +70°tilt – wall mount
0° to −75°tilt – ceiling mount
45 gbracket weight
−10 to +55 °Coperating temperature
Easy installation
For indoor installation
For outdoor installation
Flexible installation on both ceiling and wall
H rotation angle – wall mount ±90° / ceiling mount ±180°
V rotation angle – wall / ceiling mount ±70°
Wide range of permissible operating temperature and humidity
Joint for greater adjustment flexibility

Preface

General

This user manual describes the installation, features, and operation of the SAFE swivel mount for indoor motion detectors (hereinafter referred to as the “bracket”). Before using the device, please read the manual carefully and keep it for future reference.

Safety Instructions

The following signal words may appear in the user manual:

Signal WordMeaning
DANGERIndicates a high potential hazard that, if not avoided, may result in death or serious injury.
WARNINGIndicates a medium or low potential hazard that could cause minor or moderate injury if not avoided.
CAUTIONIndicates a potential risk that could lead to property damage, data loss, reduced performance, or an unpredictable outcome.
TIPProvides methods to help you solve a problem or save time.
NOTEProvides additional information, such as emphasis and supplementary text.

Revision History

VersionRevision ContentRelease Date
V1.0.0First release.August 2026

Privacy Notice

As a device user or data controller, you may collect personal data of others, such as their face, fingerprints, and license plate number. You must comply with local privacy laws and regulations to protect the legitimate rights and interests of other people by implementing measures that include, among others: providing clear and visible identification to inform people of the existence of the monitored area and providing the required contact information.

About the Manual

Important Safeguards and Warnings

This section contains information on the proper handling of the product, risk prevention, and prevention of property damage. Read it carefully before using the device and follow the instructions provided when using it.

Installation Requirements

CAUTION

Compatibility

The Bracket PIR (SAFE 11010) is designed for mounting SAFE indoor PIR motion detectors and expands their placement options on both walls and ceilings in a wide variety of environments. The bracket body, made of polycarbonate and aluminum alloy with basic anti-corrosion treatment, offers an ideal balance between mechanical strength and low weight, and can be used both indoors and in protected outdoor conditions.

Compatible DetectorNote
SAFE Motion Guard (SAFE 38400)Indoor PIR motion detector
SAFE Motion Guard (SAFE 38410)Indoor PIR motion detector
SAFE Motion Guard Plus (SAFE 38401)Indoor PIR motion detector with camera
SAFE Motion Guard Plus (SAFE 38411)Indoor PIR motion detector with camera
The bracket is intended exclusively for mounting the listed SAFE detectors. The joint mechanism enables smooth and precise aiming of the detector in both the horizontal and vertical planes, which significantly simplifies installation and subsequent fine-tuning of the detection angle.

Package Contents

Bracket PIR Package Contents
  1. Swivel bracket with joint set screw – 1 pcs
  2. Mounting screws – set
  3. Wall plugs – set
  4. QR code with serial number – 1 pcs
  5. Quick user guide – 1 pcs
The included fasteners are intended for mounting into standard masonry. For other types of surfaces (drywall, wood, tile, etc.), use fasteners suitable for the weight and type of surface.

Installation

The bracket can be mounted on a vertical wall or a horizontal ceiling. Before drilling, we recommend temporarily holding the bracket and detector in place at the intended location to verify that the joint mechanism allows the detector to be aimed in the desired direction.

Wall Mounting

  1. Choose a suitable installation location so that the joint's rotation range (±90° horizontally, −80° to +70° vertically) allows the detector to be aimed at the desired area.
  2. Hold the mounting base against the wall, mark the positions of the mounting holes, and drill holes with a diameter of 3.5 mm. Insert wall plugs into the holes.
  3. Screw the mounting base to the wall.
Drilling the Ø3.5 mm mounting hole for the base
Drilling the Ø3.5 mm
Screwing the mounting base to the wall and attaching the detector mounting plate to the joint pin
Screwing the base to the wall and attaching the detector mounting plate to the joint pin
  1. Place the detector mounting plate onto the base pin and secure it with the included screw.
  2. Attach the detector body to the mounting plate by sliding it in the direction of the arrow, following the detector's mounting instructions.
Attaching the detector body to the bracket mounting plate
Attaching the detector body to the mounting plate
  1. Use the joint mechanism to set the desired detection direction – by rotating around the vertical axis (±90° horizontally) and tilting around the horizontal axis (−80° to +70° vertically).
  2. After adjustment, tighten the joint set screw to keep the selected orientation firmly secured.
Detector rotation range for wall mounting: ±90° horizontally, −80° to +70° vertically
Rotation range for wall mounting: ±90° horizontally, −80° to +70° vertically

Ceiling Mounting

  1. Choose a suitable installation location so that the joint's rotation range (±180° horizontally, 0° to −75° vertically) allows the detector to be aimed at the desired area.
  2. Hold the mounting base against the ceiling, mark the positions of the 3 mounting holes, and drill holes with a diameter of 3.5 mm. Insert wall plugs into the holes.
  3. Screw the mounting base to the ceiling.
  4. Place the detector mounting plate onto the base pin and secure it with the included screw.
  5. Attach the detector body to the mounting plate by sliding it in the direction of the arrow, following the detector's mounting instructions.
Screwing the mounting base to the ceiling and attaching the detector mounting plate to the joint pin
Screwing the base to the ceiling and attaching the detector mounting plate to the joint pin
Attaching the detector body to the bracket mounting plate during ceiling mounting
Attaching the detector body to the mounting plate (ceiling mounting)
  1. Use the joint mechanism to set the desired detection direction – by rotating around the vertical axis (±180° horizontally) and tilting around the horizontal axis (0° to −75° vertically).
  2. After adjustment, tighten the joint set screw to keep the selected orientation firmly secured.
Detector rotation range for ceiling mounting: ±180° horizontally, 0° to −75° vertically
Rotation range for ceiling mounting: ±180° horizontally, 0° to −75° vertically
Attach and remove the detector from the bracket mounting plate only according to the mounting instructions for the specific detector model (Motion Guard / Motion Guard Plus). After completing the adjustment, always check that the joint set screw and mounting base are securely tightened – a loose joint may cause the detection zone to shift or the detector to fall.

Technical Specifications

General
ClassificationSAFE swivel mount for indoor PIR motion detectors
CompatibilitySAFE 38400, SAFE 38410, SAFE 38401, SAFE 38411
ApplicationIndoor / Outdoor
MaterialPolycarbonate and aluminum alloy
Anti-corrosion levelYes (basic protection)
JointYes
ColorWhite
ComplianceCE
EAN code0728204235058
Rotation angle
Wall mountingHorizontally ±90°, vertically −80° to +70°
Ceiling mountingHorizontally ±180°, vertically 0° to −75°
Dimensions and Weight
Product dimensions⌀ 70.0 × 55.1 mm
Package dimensions127 × 88 × 79 mm
Installation typeWall / ceiling
Weight (net)45 g
Weight (gross)120 g
Operating Conditions
Operating temperature−10 °C to +55 °C
Operating humidity10–90 % RH

Safety Notices

Warranty

The SAFE Bracket PIR is covered by a warranty of 36 months from the date of sale. The warranty does not cover defects caused by improper installation, mechanical damage, or failure to follow the instructions in this manual.

If you experience any problems with the device, contact technical support first – most situations can be resolved remotely.

Need Help?

SAFE HOME europe technical support:
Email: info@safe-home.eu  ·  Phone: (+420) 581 222 262
Website: www.smart-safe.eu