Product Manuals / Accessories

Swivel mount for Motion Cam detectors
SAFE Bracket Cam (SAFE 11020)

User Manual

Updated 20. 8. 2026

Product Page
SAFE Bracket Cam swivel mount SAFE 11020

Bracket Cam SAFE 11020 is a professional adjustable mounting bracket designed for photo-verification PIR detectors in the Motion Cam series. Its robust construction, combined with exceptional adjustment flexibility, makes it an indispensable accessory for any integrator of a modern SAFE wireless security system.

φ 70 mmbase diameter
45 gweight
±180°H rotation (ceiling)
−50° to +90°V tilt – wall
0° to −90°V tilt – ceiling
−10 to +55 °Coperating temperature
36 monthswarranty
Easy installation
For indoor installation
For outdoor installation
Flexible installation on both ceiling and wall
H rotation angle – wall mount ±90° / ceiling mount ±180°
V rotation angle – wall / ceiling mount ±70°
Wide range of permissible operating temperature and humidity
Joint for greater adjustment flexibility

Preface

General

This user manual describes the installation, features, and operation of the swivel mount for Motion Cam detectors (hereinafter referred to as the “bracket”). Before using the device, please read the manual carefully and keep it for future reference.

Safety Instructions

The following signal words may appear in the user manual:

Signal WordMeaning
DANGERIndicates a high potential hazard that, if not avoided, may result in death or serious injury.
WARNINGIndicates a medium or low potential hazard that could cause minor or moderate injury if not avoided.
CAUTIONIndicates a potential risk that could lead to property damage, data loss, reduced performance, or an unpredictable outcome.
TIPProvides methods to help you solve a problem or save time.
NOTEProvides additional information, such as emphasis and supplementary text.

Revision History

VersionRevision ContentRelease Date
V1.0.0First release.August 2026

Privacy Notice

As a device user or data controller, you may collect personal data of others, such as their face, fingerprints, and license plate number. You must comply with local privacy laws and regulations to protect the legitimate rights and interests of other people by implementing measures that include, among others: providing clear and visible identification to inform people of the existence of the monitored area and providing the required contact information.

About the Manual

Important Safeguards and Warnings

This section contains information on the proper handling of the product, risk prevention, and prevention of property damage. Read it carefully before using the device and follow the instructions provided when using it.

Installation Requirements

CAUTION

Compatibility

The Bracket Cam SAFE 11020 was developed for the flexible installation of photo-verification PIR motion detectors SAFE Motion Cam and supports both wall and ceiling mounting. The polycarbonate and aluminum alloy body offers an ideal balance between mechanical strength and low weight. The joint mechanism enables smooth and precise aiming of the detector in both the horizontal and vertical planes, which significantly simplifies installation and subsequent fine-tuning of the detection angle.

The bracket is fully compatible with the following detectors:

Basic anti-corrosion treatment, together with an operating temperature range from −10 °C to +55 °C, ensures reliable operation both in standard indoor spaces and in more demanding outdoor conditions.

The bracket is intended exclusively for the Motion Cam series detectors listed above. Use with other devices has not been tested, and the manufacturer accepts no liability for it.

Package Contents

SAFE Bracket Cam Package Contents
  1. Bracket base (wall/ceiling) – 1 pcs
  2. Articulated swivel arm with detector adapter – 1 pcs
  3. Mounting screws and wall plugs – 1 set
  4. QR code linking to this manual – 1 pcs
  5. Quick user guide – 1 pcs

Installation

The bracket can be mounted on a vertical wall or a horizontal ceiling. Before drilling, check that there is no electrical wiring or other installations inside the wall or ceiling, and choose a location so that the detector covers the desired area after installation.

Wall Mounting

Mounting the bracket base on the wall and attaching the detector
Mounting the base on the wall and attaching the Motion Cam detector
  1. Hold the bracket base at the chosen location on the wall and mark the positions of the holes to be drilled through the mounting holes.
  2. Drill the holes and insert the included wall plugs.
  3. Screw the bracket base to the wall using the included screws.
  4. Attach the Motion Cam detector to the swivel arm and secure it with the included screw.
  5. Set the desired rotation angle of the detector (see below).

Ceiling Mounting

Rotating the swivel arm into the ceiling mounting position
Rotating the swivel arm from the wall position to the ceiling position
  1. Rotate the swivel arm from the base into the position intended for ceiling mounting (see figure).
  2. Hold the bracket base at the chosen location on the ceiling and mark the positions of the holes to be drilled through the mounting holes.
  3. Drill the holes and insert the included wall plugs.
  4. Screw the bracket base to the ceiling using the included screws.
  5. Attach the Motion Cam detector to the swivel arm and secure it with the included screw.
  6. Set the desired rotation angle of the detector (see below).
Tighten the screw securing the detector to the swivel arm to a maximum torque of 0,5 N·m. Overtightening the screw may damage the detector's plastic cover.

Adjusting the Rotation Angle

Adjustment range of the detector's rotation angle on the swivel arm
Range of horizontal (H) and vertical (V) rotation of the detector

After loosening and retightening the screw, the joint mechanism allows the detection direction to be smoothly adjusted in both planes:

Mounting TypeHorizontal rotation (H)Vertical tilt (V)
Wall±90°−50° to +90°
Ceiling±180°0° to −90°

After setting the angle, secure the detector and perform a detection test according to the Motion Cam detector manual to verify that the selected angle covers the desired area.

Technical Specifications

General
Model DesignationSAFE 11020
ClassificationSAFE swivel mount for indoor motion detectors with Cam photo-verification
CompatibilitySAFE 38450, SAFE 38451
ApplicationIndoor / Outdoor
Installation typeWall / ceiling
EAN code0728204235065
Construction
MaterialPolycarbonate and aluminum alloy
ColorWhite
Anti-corrosion levelYes (basic protection)
JointYes
Rotation angleWall mounting: ±90° horizontally, −50° to +90° vertically
Ceiling mounting: ±180° horizontally, 0° to −90° vertically
Dimensions and Weight
Product dimensionsφ 70.0 × 55.1 mm
Package dimensions127 × 88 × 79 mm
Weight (net)45 g
Weight (gross)120 g
Operating Conditions
Operating temperature−10 °C to +55 °C
Operating humidity10–90 % RH
Tightening torque of the mounting screwmax. 0.5 N·m
Compliance and Warranty
ComplianceCE
Warranty36 months

Safety Notices

Warranty

The SAFE Bracket Cam (SAFE 11020) is covered by a warranty of 36 months from the date of sale. The warranty does not cover defects caused by improper installation, mechanical damage, or failure to follow the instructions in this manual.

If you experience any problems with the device, contact technical support first – most situations can be resolved remotely.

Need Help?

SAFE HOME europe technical support:
Email: info@safe-home.eu  ·  Phone: (+420) 581 222 262
Website: www.smart-safe.eu