Button is a wireless smart panic button designed to provide the fastest possible help in emergency situations. A single press of the button, which is equipped with protection against accidental activation, instantly triggers a pre-set alarm or automation scenario. You can choose from five different alarm modes: SOS distress signal, intrusion alarm, fire alarm, medical assistance call, or gas leak alert. The Button thus represents a simple and effective solution for having reliable help always within reach.
Preface
General
This user manual describes the installation, features, and operation of the wireless panic button (hereinafter referred to as the “button”). Before using the device, please read the manual carefully and keep it for future reference.
Safety Instructions
The following signal words may appear in the user manual:
| Signal Word | Meaning |
|---|---|
| DANGER | Indicates a high potential hazard that, if not avoided, may result in death or serious injury. |
| WARNING | Indicates a medium or low potential hazard that could cause minor or moderate injury if not avoided. |
| CAUTION | Indicates a potential risk that could lead to property damage, data loss, reduced performance, or an unpredictable outcome. |
| TIP | Provides methods to help you solve a problem or save time. |
| NOTE | Provides additional information, such as emphasis and supplementary text. |
Revision History
| Version | Revision Content | Release Date |
|---|---|---|
| V1.0.0 | First release. | August 2026 |
Privacy Notice
As a device user or data controller, you may collect personal data of others, such as their face, fingerprints, and license plate number. You must comply with local privacy laws and regulations to protect the legitimate rights and interests of other people by implementing measures that include, among others: providing clear and visible identification to inform people of the existence of the monitored area and providing the required contact information.
About the Manual
- The user manual serves as a reference guide only. There may be minor differences between the information provided and the product.
- We are not liable for any damage resulting from using the product in a manner that does not comply with the instructions in the user manual.
- The manual will be updated according to the latest laws and regulations of the relevant jurisdictions. For detailed information, refer to the printed user manual, scan the QR code, or visit our official website. The manual is for reference purposes only. There may be minor differences between the electronic and paper versions.
- All designs and software are subject to change without prior written notice. Due to product updates, certain differences may occur between the product and the information in the manual. Customer service will provide you with the latest version of the software and supplementary documentation.
- There may be printing errors or discrepancies in the description of functions, operations, and technical data. In the event of doubt or dispute, we reserve the right of final explanation. If the manual (in PDF format) cannot be opened, update your reader software or try a different common reader software.
- All trademarks, registered trademarks, and company names in the manual are the property of their respective owners.
- If you encounter any problems while using the device, visit our website or contact your supplier or customer service.
- In the event of ambiguity or dispute, we reserve the right of final explanation.
Important Safeguards and Warnings
This section contains information on the proper handling of the product, risk prevention, and prevention of property damage. Read it carefully before using the device and follow the instructions provided when using it.
Operating Requirements
- Before use, make sure the device's power supply is working properly.
- Do not unplug the device's power cable while it is switched on.
- Use the device only within its rated power range.
- Transport, use, and store the device within the permitted humidity and temperature conditions.
- Prevent liquids from splashing or dripping onto the device. Make sure there are no liquid-filled objects on the device, to prevent liquid from entering it.
- Do not disassemble the device.
Installation Requirements
- Before switching on, connect the device to the power adapter.
- Strictly comply with local electrical safety standards and make sure the voltage in the area is stable and matches the device's power requirements.
- Do not connect the device to more than one power source. Otherwise, the device could be damaged.
- When working at heights, follow all safety procedures and use the required protective equipment.
- Do not expose the device to direct sunlight or heat sources.
- Do not install the device in damp, dusty, or smoky locations.
- Install the device in a well-ventilated location and do not block its ventilation.
- Use the power adapter or power supply provided by the device manufacturer.
- The power supply must meet the ES1 requirements of IEC 62368-1 and must not exceed PS2. The power supply requirements are governed by the device's rating label.
- Connect Class I electrical appliances to a socket with protective earthing.
Functional Elements
- Button – pressing it sends an alarm message to the hub; holding it for 8 seconds switches the device into pairing mode.
- LED indicator (green / red) – indicates pairing and the result of sending the alarm message (see Signaling).
Operating Principle
Button is a wireless transmitter that sends an alarm signal to the hub of the security system with a single press. The hub processes the event immediately – it triggers the siren, sends an alarm message to the app ProSAFE and, if the system is connected to DPPC there too.
Triggering the alarm
In normal operating mode, a single press of the button is enough. The LED indicator confirms the message was sent to the hub with one green blink; a subsequent green blink lasting 0.5 s confirms successful delivery, a red blink lasting 0.5 s indicates that sending failed (e.g., out of signal range).
Protection against accidental pressing
To prevent a false alarm from being triggered by accidental pressing, you can enable protection against accidental pressing. Once enabled, sending an alarm message requires either holding the button pressed for 2 seconds, or pressing it twice quickly – depending on the selected mode (Hold the button / Double press). LED indication in this mode is the same as for a normal press.
Two operating modes
Button can be set to one of two operating modes:
- Panic button – pressing it triggers the selected alarm type: SOS panic signal (default), intrusion alarm, fire alarm, medical assistance call, or gas leak alert.
- Control button – pressing it starts the selected automation scene (e.g., controlling lighting, a gate, a garage door, blinds, or household appliances). This mode is intended for smart automation outside the scope of the certified security system.
SAFE Keeper protocol
Communication with the hub is provided by the encrypted two-way radio protocol SAFE Keeper in the 868 MHz band:
- AES128 encryption with a rolling code,
- frequency hopping as protection against interference,
- range up to 1 400 m in open space,
- low battery warning and signal strength detection directly in the app.
Adding to the System
Before adding the device
- Install the app ProSAFE and log in to your account.
- Make sure you have a compatible hub added in the app (Hub 2 Plus LTE, SAFE 38300) with a stable internet connection.
- The hub must be in the Disarmed state.
How to add Button
- In the ProSAFE app, open your hub and click + Add device.
- Scan the QR code with the serial number on the bottom of the button and click Next.
- Once the button is found, click Next.
- Follow the on-screen instructions to activate the button and click Next.
- Wait for pairing to complete – the button can also be switched into pairing mode manually by holding it for 8 seconds (the LED blinks green rapidly).
- Enter a name for the button, select an area (zone), and click Done.
States
You can view the current state of the button in the ProSAFE app by selecting the device in the device list.
| Parameter | Meaning |
|---|---|
| Permanent disarm | Status of the button's permanent disarm function
|
| Battery level | Full / sufficient / medium / insufficient / low |
| Operating mode | The button's configured mode – panic button or automation control button |
| LED brightness | The configured brightness level of the LED indicator |
| Protection against accidental pressing | On / off |
| Transmission via repeater | Whether the button communicates with the hub via a signal repeater
|
| Firmware version | The button's current firmware version |
Settings
To change the settings, in the ProSAFE app select the button in the device list and click the edit icon.
| Settings | Value |
|---|---|
| Device configuration | Displays the device name, type, serial number, and model; edit the name (save with the Save button) |
| Area | Assignment of the button to a system area |
| Permanent disarm | Yes / Cover only / off (no icon) |
| Siren linkage | When this button triggers an alarm, the siren sounds |
| Alarm and video linkage | Linkage of the alarm with the selected video channel |
| Video channel | Selection of the camera channel for linkage |
| Alarm type | SOS (default) / Intrusion / Fire / Medical assistance / Gas leak |
| LED brightness | Off / low / high |
| Protection against accidental pressing | Off / Hold the button / Double press |
| Signal strength test | Verification of the radio connection quality at the installation site |
| Button test | Verification of the button's functionality |
| Cloud update | Remote firmware update |
| Disconnect device | Removal of the button from the system (swipe left in the device list) |
Signaling
| LED indication | Event |
|---|---|
| Fast green blinking | Pairing mode (started by holding the button for 8 s) |
| Lights up green for 2 s | Successful pairing with the hub |
| Slow green blinking for 3 s | Pairing failed |
| One green blink | Sending the alarm message to the hub |
| Lights up green for 0.5 s | The message was successfully delivered to the hub |
| Lights up red for 0.5 s | Sending the message to the hub failed |
Installing the Button
Button can be permanently installed using the included bracket, or carried freely as a portable panic button. Before final mounting, add the button to the hub and test the signal strength at the installation site – the recommended minimum value is 2 bars. The recommended installation height is up to 2 m.
Wall mounting (screws)
- Using the holes on the bracket, drill 2 holes into the wall and insert the wall plugs.
- Place the bracket against the holes and secure it to the wall with screws.
- Fit the button into the bracket by sliding it in the direction of the arrow and check that it is secure.
Functionality Test
After installation, verify the correct function of the button in the ProSAFE app:
- Signal strength test – in the button settings, run the test and verify that the signal reaches at least 2 bars.
- Button test – run the test and press the button to verify that the hub registered the message.
Maintenance
- Wipe the button's cover only with a dry, soft cloth; do not use aggressive cleaning agents.
- Regularly check the battery status and signal strength in the ProSAFE app.
- After each time you handle the button, perform a button test.
- Do not disassemble the button and protect it from moisture, dust, and excessive temperatures.
- The current version of the manual (V2.0.4) no longer includes the battery replacement procedure – if you receive a low battery warning in the ProSAFE app, contact SAFE HOME europe technical support.
Technical Specifications
| Interface | |
| Indication | 1× green / red LED |
| Button | 1× |
| Function | |
| Remote update | Yes (cloud) |
| Search | Signal strength detection |
| Low battery warning | Yes |
| Wireless transmission – SAFE Keeper | |
| Carrier frequency | 868,0–868,6 MHz |
| Transmitter power (EIRP) | limit 25 mW |
| Communication distance | Up to 1 400 m in open space |
| Communication type | Two-way |
| Encryption mode | AES128 |
| Frequency hopping | Yes (automatic) |
| General | |
| Power supply | 1× CR2032 battery, 3 V DC |
| Power consumption | Max. 14 mW |
| Current draw | Operating 4.3 µA; max. 60 mA |
| Minimum voltage | 2,2 V DC |
| Low battery threshold | 2,6 V DC |
| Battery life | 3 years (when used twice a week) |
| Power supply type | C |
| Operating temperature | −10 °C to +55 °C (indoor) |
| Operating humidity | 10–90 % RH |
| Ingress protection rating | IP54 |
| Housing material | PC + ABS, white |
| Product dimensions | 55,0 × 36,0 × 14,2 mm (L × W × H) |
| Package dimensions | 95,0 × 59,5 × 30,5 mm (L × W × H) |
| Weight (net) | 18 g |
| Weight (gross) | 48 g |
| Installation | Into the bracket, portable; recommended height up to 2 m |
| Compatibility | Hub 2 Plus LTE (SAFE 38300), hub v1.001.0000000.7.R.220106 or later |
| EAN code | 0728204234860 |
| Certification | CE; EN 50131-1:2006+A1:2009+A2:2017+A3:2020; EN 50131-3:2009; EN 50131-5-3:2017; EN 50131-6:2017; Security grade 2; Environmental class II |
Package Contents
- Button – 1 pcs
- Quick user guide – 1 pcs
- Legal and regulatory information – 1 pcs
- Bracket – 1 pcs
- Mounting kit (screws, wall plugs) – 1 set
Safety Notices
- Operate and store the device only within the permitted temperature and humidity range (−10 °C to +55 °C, 10–90 % RH, indoor use only).
- Do not expose the device to direct sunlight, heat sources, moisture, dust, or soot.
- Do not throw the battery into fire or a hot oven, do not crush it, and do not cut it – there is a risk of explosion.
- Do not leave the battery in an environment with extremely high temperature or expose it to extremely low air pressure – there is a risk of explosion or leakage of flammable liquids and gases.
- Replace a depleted battery only with a battery of the same type and model (CR2032).
- Do not dispose of the product with regular household waste – hand it in for recycling through the electrical equipment take-back system.
Warranty
The SAFE Button device comes with a warranty of 36 months from the date of sale. The warranty does not cover the battery or defects caused by failure to follow the instructions in this manual.
If you experience any problems with the device, contact technical support first – most situations can be resolved remotely.
Gallery
Need Help?
SAFE HOME europe technical support:
Email: info@safe-home.eu · Phone: (+420) 581 222 262
Website: www.smart-safe.eu