Product Manuals / Outdoor security

Wireless outdoor siren compatible with the ProSAFE app
SAFE Outdoor Siren (SAFE 38140)

User Manual

Updated 20. 8. 2026

Product Page Datalist (PDF)
The SAFE Outdoor Siren siren

Outdoor Siren is a wireless siren designed for outdoor use, offering 3 volume intensity levels, 3 types of signaling tones, and an adjustable duration interval for the audible alarm signaling. The siren includes a group of 12 LEDs providing intense and bright visual alarm signaling. High resistance to weather conditions.

110 dBsignaling sound pressure
1 600 mradio signal range
3,4 yearsbattery life
IP65ingress protection rating
12×LEDs for visual signaling
Grade 2security grade according to EN 50131
Visual and audible alarm signaling
110 dBBuilt-in siren and loud 110 dB alarm
12 LED Group of 12 LEDs for visual alarm signaling
IP65 protection rating allowing installation outdoors
Radio signal range up to 1600 m
Multi-level audible alarm signaling
Integrated temperature sensor
Security grade 2 according to ČSN EN 50131
Data encryption using the AES algorithm with rolling code
Highly weather-resistant cover
Support for external 12V DC power supply
Up to 4 years of battery operation
Cloud-based device firmware update
Smart bracket for quick and easy installation
Tamper protection against sabotage and unauthorized manipulation of the device
Protection against radio signal interference
Two-way information transfer between devices
Adding the device to the system by scanning a QR code

Preface

General

This user manual introduces the installation, functions, and operation of the wireless outdoor siren (hereinafter referred to as the “siren”). Before using the device, read the manual carefully and keep it for future reference.

Safety Instructions

The following signal words may appear in the user manual:

Signal WordMeaning
DANGERIndicates a high potential hazard that, if not avoided, may result in death or serious injury.
WARNINGIndicates a medium or low potential hazard that could cause minor or moderate injury if not avoided.
CAUTIONIndicates a potential risk that could lead to property damage, data loss, reduced performance, or an unpredictable outcome.
TIPProvides methods to help you solve a problem or save time.
NOTEProvides additional information, such as emphasis and supplementary text.

Revision History

VersionRevision ContentRelease Date
V1.0.0First release.August 2026

Privacy Notice

As a device user or data controller, you may collect personal data of others, such as their face, fingerprints, and license plate number. You must comply with local privacy laws and regulations to protect the legitimate rights and interests of other people by implementing measures that include, among others: providing clear and visible identification to inform people of the existence of the monitored area and providing the required contact information.

About the Manual

Important Safeguards and Warnings

This section contains information on the proper handling of the product, risk prevention, and prevention of property damage. Read it carefully before using the device and follow the instructions provided when using it.

Operating Requirements

CAUTION

Installation Requirements

WARNING
CAUTION

Functional Elements

Outdoor Siren functional elements – numbered diagram of the internal layout
Outdoor Siren functional elements
  1. Waterproof cover – protects the siren's internal electronics from water and dust.
  2. Spirit level – allows you to verify that the siren is horizontal during installation.
  3. Tamper contact – triggers an alarm when the siren is removed from the mounting panel or the cover is opened.
  4. Buzzer – source of the loud audible alarm signaling.
  5. Battery compartment – 4× CR123A batteries installed according to the marked polarity.
  6. Pairing indicator (green LED) – indicates the progress and result of pairing with the hub (see Signaling).
  7. Power terminal 12 V DC – used to connect an optional external power cable 12 V DC.
  8. Power cable outlet – grommet for feeding in the power cable 12 V DC into the siren's cover.
  9. Alarm indicator – flashes rapidly when an alarm event is triggered.
  10. Power switch (ON/OFF) – turns the siren on and off.

Operating Principle

Outdoor Siren is an outdoor wireless siren of the SAFE security system, used to provide audible and visual alerts of any attempt to breach the protected area. When installed on the outside shell of a building, it acts as a strong deterrent for potential intruders. Combined with outdoor PIR detectors or IP cameras, it can effectively deter an intruder even before an actual attack or breach of the protected perimeter occurs.

The siren responds to alarm messages sent by the hub from other system devices and also serves to signal the entry and exit delay or the arming and disarming of the system.

Visual and audible alarm signaling

The siren emits an extremely loud audible signal with an intensity of up to 110 dB at a distance of 1 m, complemented by a distinctive visual alert thanks to 12 powerful LEDs. Visual signaling combined with an intense audible alarm not only effectively informs the surroundings of the emergency event but, in most cases, also deters the intruder from further action.

Multi-level audible alarm signaling

The siren offers various types of warning signaling that can be easily adapted to the specific alarm signal defined by the connected security system elements – for example, an unauthorized intrusion alert, panic alarm, fire alarm, or medical assistance call. In the ProSAFE app, the audible signaling can be simply disabled for selected events if it is not suitable for the given situation.

Sabotage protection

The siren has a tamper contact that protects the device against unauthorized manipulation. If an intruder attempts to remove the siren, forcibly open its cover, or otherwise disrupt its function, the siren immediately triggers an alarm accompanied by siren sabotage signaling – an audible and visual alarm identical to normal alarm signaling.

SAFE Keeper protocol

Communication with the hub is provided by the encrypted two-way radio protocol SAFE Keeper in the 868 MHz band:

External power supply 12 V DC

In addition to standard battery power, the siren can optionally be powered from an external source 12 V DC (the power cable is not included in the package). External power saves the batteries and allows the use of additional LED indication of alarm and arming status (see Signaling). The external power connection can be supplemented in the app with the function External power detection, which alerts you to a failure of the 12 V DC.

The 12 V DC power supply must meet the ES1 requirements according to IEC 62368-1 and must not exceed the PS2 level. Connect Class I electrical appliances only to a socket with protective earthing.

Adding to the System

Adding a device by scanning a QR code (example)
Adding a device by scanning a QR code (example)

Before adding the siren

  1. Install the app ProSAFE and log in to your account.
  2. Make sure you have a compatible hub added in the app (Hub 2 Plus LTE, SAFE 38300) with a stable internet connection.
  3. The hub must be in the Disarmed state.
App version 1.96 or later and hub firmware v1.001.R.211209 or later are required.

How to add the Outdoor Siren

  1. In the ProSAFE app, open your hub and click Device.
  2. Click + Add device.
  3. Scan the QR code with the serial number on the bottom of the siren and tap Next.
  4. Once the siren is found, tap Next.
  5. Following the on-screen instructions, turn on the siren by switching the power switch to position ON and click Next.
  6. Wait for pairing to complete – successful pairing is confirmed by the LED lighting up for 2 seconds.
  7. Enter a name for the siren, select an area (zone), and tap Done.
If pairing fails (the LED blinks slowly for 3 s), check that the hub is online and in the Disarmed state, and repeat the procedure.

States

You can view the current status of the siren in the ProSAFE app by selecting the siren in the device list.

ParameterMeaning
Temporarily disableSiren functionality status
  • Enable (default) – all siren functions are active
  • Disable tamper alarm only
  • Disable – siren functions are switched off
TemperatureCurrent ambient temperature measured by the integrated sensor
Signal strengthRadio signal level between the hub and the siren: none / low / weak / good / excellent
External power statusConnected / disconnected – alarm for failure of the 12 V DC
Battery levelFull / sufficient / medium / insufficient / low
Tamper statusSignals the siren being removed from the mounting panel or the cover being opened
Online statusConnection between the siren and the hub
  • Online – the siren is communicating
  • Offline – loss of connection
VolumeSet volume level of the audible alarm
Alarm durationSet duration of the audible alarm signaling
Entry/exit ring tone when arming and disarmingRing tone assigned to the entry and exit delay
Beep volumeHigh / medium / low
Transmission via repeaterWhether the siren forwards hub device messages via a signal repeater
Firmware versionCurrent siren firmware version

Settings

You can adjust the settings in the ProSAFE app: select the siren in the device list and tap the edit icon.

SettingsValue
Device nameCustom name for the siren; displayed in the device list and in notifications
Area (zone)Assignment of the siren to a system area
Temporarily disableAllow (default) / Disable tamper alarm only / Disable
Area permissionsSelection of areas whose alarm will trigger signaling by this siren
External power detectionEnabling the sending of alarm messages to the app in the event of a failure of the 12 V DC
LED indicatorOn (default) / off – when off, the LED does not light up regardless of the device's status
Sound settingsAlarm volume (low / medium / high); enabling or disabling beeping during arming, disarming, and entry/exit delay
Alarm durationAdjustable from 3 to 80 s
Alarm status signalingThe LED lights up when an alarm occurs in an armed area; if the area has not been disarmed and the alarm ended less than 30 s ago, the LED flashes 2× per minute
Beep volumeHigh / medium / low
Signal strength testVerification of the radio connection quality at the installation site
Speaker testBy tapping Start test you can verify the volume of the audible alarm
Transmission powerHigh / low / automatic – higher power extends the range and increases consumption
Cloud updateRemote firmware update
Remove deviceDeleting the siren from the system (swipe left in the device list)

Signaling

LED indicationEvent
Fast green blinkingPairing with the hub in progress
Lights up green for 2 sSuccessful pairing with the hub
Slow green blinking for 3 sPairing failed
The alarm indicator flashes rapidlyAn alarm has been triggered – audible and visual signaling
Blue flashing once every 3 sThe system is armed (only when powered from an external 12 V DC)
Red flashing twice per minuteThe alarm was triggered and has not been cleared for a certain period (only when powered from an external 12 V DC)
OffThe LED indicator is turned off in the settings, or the device is switched off

Choosing the installation location

Install the siren in a clearly visible and audible location on the outside shell of the building so that the audible and visual signal alerts the widest possible surrounding area to the alarm. Choose a location that makes it difficult for an intruder to access the siren and attempt sabotage – ideally at a height beyond normal reach.

Signal strength

Before final installation, test the signal strength in the app (Signal strength test). The recommended minimum value is 2 bars. If the signal is weak, move the siren or use a signal repeater.

Where not to install the siren

  1. In places exposed to direct sunlight or near heat sources.
  2. In damp, dusty, or smoky areas.
  3. In locations with a weak hub radio signal.
  4. In easily accessible places that facilitate unauthorized manipulation of the siren (e.g., low above the ground, near a window or balcony).
  5. In recesses, under canopies, or behind other obstacles that dampen the sound spreading to the surroundings.

Siren installation

Before mounting, turn on the siren, connect it to the hub, and verify the signal strength at the intended installation location – we recommend installing the siren in a location with a signal strength of at least 2 bars.

Siren installation – removing the front cover, mounting the back panel on the wall, and the ON/OFF power switch
Siren installation: removing the front cover, mounting the back panel, and the power switch
  1. Loosen the screw at the bottom of the siren and remove the front cover.
  2. Place the back panel in a horizontal position – use the built-in spirit level to verify that the siren is level and horizontal.
  3. Insert the wall plugs (included in the package) into the drilled holes.
  4. Position the back panel so that the screw holes are aligned with the wall plugs.
  5. Secure the back panel with three ST4 × 25 mm.
  6. Fit the front cover back on and tighten the screw at its bottom – this secures the siren against removal.
The siren can also be attached using a suitable adhesive (bonding) material without drilling – in this case as well, use the built-in spirit level for alignment.

Functionality Test

After installation, verify the correct function of the siren:

  1. Signal strength test – run a test in the app and verify that the signal reaches at least 2 bars.
  2. Speaker test – by tapping Start test verify the volume of the audible alarm at the installation site.
  3. Tamper test – after completing the installation, carefully try to lift the front cover and verify that a sabotage alert was received in the app.
Setting changes are synchronized with the siren within its communication interval with the hub – wait a moment after starting the test.

Power supply and battery replacement

The siren can be powered by 4× CR123A lithium batteries (3 V, default) with a lifespan of up to 3,4 years (with activation once every 2 weeks and a signaling duration of 120 s), or optionally from an external source 12 V DC. The ProSAFE app will warn you of a low battery.

Opening the siren cover, inserting CR123A batteries according to polarity and connecting the optional 12 V DC power supply
Opening the cover, inserting CR123A batteries (mind the polarity), and optional 12 V DC
  1. Loosen the screw at the bottom and remove the siren's front cover.
  2. Open the waterproof cover of the battery compartment.
  3. Set up the power supply according to the selected type:
    • Battery power: insert 4 CR123A batteries according to the marked polarity.
    • 12 V DC power (optional): feed the 12 V DC power cable into the cover through the power cable outlet and connect it to the power terminal.
  4. Close the waterproof cover.
  5. Turn on the device using the power switch to the ON.
  6. Fit the front cover back on and tighten the securing screw.
Always replace all 4 batteries at the same time and use only batteries of the same type (CR123A). Do not throw used batteries into fire and keep them out of reach of children – risk of explosion or serious injury if swallowed.

Maintenance

Technical Specifications

Audible and visual signaling
Sound pressure110 dB at a distance of 1 m
Volume setting3 levels
Alarm duration3 to 80 s
Visual signaling12× group of alarm LEDs
Pairing indication1× green LED
Temperature sensor
Measuring range−30 °C to +70 °C (outdoor spaces)
Accuracy / resolution±1 °C / 1 °C
Wireless transmission – SAFE Keeper
Carrier frequency868,0–868,6 MHz
Transmitter power (EIRP)limit 25 mW
Communication distanceUp to 1 600 m in open space
Communication typeTwo-way
EncryptionAES-128
Frequency hoppingYes (automatic)
Interface and functions
Control Devices1× power switch
TamperYes (tamper contact)
Remote updateYes (cloud)
Signal strength detectionYes
External power detectionYes
Low battery notificationYes
Test modeSignal strength test, speaker test
General
Power supply4× CR123A batteries, 3 V (default, included in the package); 12 V DC (optional)
Power consumptionMax. 240 mW
Current draw≤92 µA (operation), ≤1 A (alarm)
Battery life3,4 years (with activation once every 2 weeks and signaling duration of 120 s, battery efficiency 80 %)
Operating temperature−25 °C to +60 °C
Operating humidity10–90 % RH
Ingress protection ratingIP65
Housing materialPC + ABS
ColorWhite + red
Product dimensions200 × 200 × 52,5 mm (L × W × H)
Package dimensions256 × 242 × 64 mm (L × W × H)
Weight (net)610 g
Weight (gross)965,4 g
InstallationWall
CompatibilityHub 2 Plus LTE (SAFE 38300); app v1.96 or later; hub firmware v1.001.R.211209 or later
CertificationCE; EN 50131-1:2006+A1:2009+A2:2017+A3:2020; EN 50131-4:2019; EN 50131-6:2017; EN 50131-5-3:2017; Security grade 2; Environmental class IV

Package Contents

Outdoor Siren package contents
  1. Outdoor Siren – 1 pcs
  2. CR123A batteries – 4 pcs
  3. Mounting kit – 1 set
  4. Quick user guide – 1 pcs
  5. Legal and regulatory information – 1 pcs
  6. QR code with the user manual – 1 pcs

Safety Notices

Warranty

The SAFE Outdoor Siren device is provided with a warranty 36 months from the date of sale. The warranty does not cover batteries or defects caused by failure to follow the instructions in this manual.

If you experience any problems with the device, contact technical support first – most situations can be resolved remotely.

Gallery

Need Help?

SAFE HOME europe technical support:
Email: info@safe-home.eu  ·  Phone: (+420) 581 222 262
Website: www.smart-safe.eu