Input Board allows any third-party wired components with an NC/NO type output to be connected to the SAFE security system. It ensures reliable transmission of alarm and tamper signals via an encrypted protocol SAFE Keeper, thereby expanding the system's capabilities without the need to replace existing devices.
Preface
General
This user manual introduces the installation, functions, and operation of the wireless input module for wired detectors (hereinafter referred to as the “module”). Before using the device, read the manual carefully and keep it for future reference.
Safety Instructions
The following signal words may appear in the user manual:
| Signal Word | Meaning |
|---|---|
| DANGER | Indicates a high potential hazard that, if not avoided, may result in death or serious injury. |
| WARNING | Indicates a medium or low potential hazard that could cause minor or moderate injury if not avoided. |
| CAUTION | Indicates a potential risk that could lead to property damage, data loss, reduced performance, or an unpredictable outcome. |
| TIP | Provides methods to help you solve a problem or save time. |
| NOTE | Provides additional information, such as emphasis and supplementary text. |
Revision History
| Version | Revision Content | Release Date |
|---|---|---|
| V1.0.0 | First release. | August 2026 |
Privacy Notice
As a device user or data controller, you may collect personal data of others, such as their face, fingerprints, and license plate number. You must comply with local privacy laws and regulations to protect the legitimate rights and interests of other people by implementing measures that include, among others: providing clear and visible identification to inform people of the existence of the monitored area and providing the required contact information.
About the Manual
- The user manual serves as a reference guide only. There may be minor differences between the information provided and the product.
- We are not liable for any damage resulting from using the product in a manner that does not comply with the instructions in the user manual.
- The manual will be updated according to the latest laws and regulations of the relevant jurisdictions. For detailed information, refer to the printed user manual, scan the QR code, or visit our official website. The manual is for reference purposes only. There may be minor differences between the electronic and paper versions.
- All designs and software are subject to change without prior written notice. Due to product updates, certain differences may occur between the product and the information in the manual. Customer service will provide you with the latest version of the software and supplementary documentation.
- There may be printing errors or discrepancies in the description of functions, operations, and technical data. In the event of doubt or dispute, we reserve the right of final explanation. If the manual (in PDF format) cannot be opened, update your reader software or try a different common reader software.
- All trademarks, registered trademarks, and company names in the manual are the property of their respective owners.
- If you encounter any problems while using the device, visit our website or contact your supplier or customer service.
- In the event of ambiguity or dispute, we reserve the right of final explanation.
Important Safeguards and Warnings
This section contains information on the proper handling of the product, risk prevention, and prevention of property damage. Read it carefully before using the device and follow the instructions provided when using it.
Operating Requirements
- Before use, make sure the device's power supply is working properly.
- Do not unplug the device's power cable while it is switched on.
- Use the device only within its rated power range.
- Transport, use, and store the device within the permitted humidity and temperature conditions.
- Prevent liquids from splashing or dripping onto the device. Make sure there are no liquid-filled objects on the device, to prevent liquid from entering it.
- Do not disassemble the device.
Installation Requirements
- Before switching on, connect the device to the power adapter.
- Strictly comply with local electrical safety standards and make sure the voltage in the area is stable and matches the device's power requirements.
- Do not connect the device to more than one power source. Otherwise, the device could be damaged.
- When working at heights, follow all safety procedures and use the required protective equipment.
- Do not expose the device to direct sunlight or heat sources.
- Do not install the device in damp, dusty, or smoky locations.
- Install the device in a well-ventilated location and do not block its ventilation.
- Use the power adapter or power supply provided by the device manufacturer.
- The power supply must meet the ES1 requirements of IEC 62368-1 and must not exceed PS2. The power supply requirements are governed by the device's rating label.
- Connect Class I electrical appliances to a socket with protective earthing.
Functional Elements
- On/Off switch – turns the module on (upper position) and off (lower position).
- Power output (+ / −) – two auxiliary power terminals 3,3 V, max. 10 mA, for the connected wired device.
- Alarm input (ALARM) – two terminals forming a loop for connecting the output of a wired detector (NO / NC / Pulse).
- Tamper input (TAMP) – two terminals forming a loop for connecting the tamper contact of the wired device.
- Indicator – 1 × green LED indicating the module's status and alarm.
- Battery compartment – 3 × CR123A batteries, pre-installed at the factory and protected by a mylar strip.
Operating Principle
Input Board serves as a converter between a third-party wired security device and the wireless SAFE system. As soon as the connected external device (wired detector, button, sensor, etc.) triggers an alarm or tamper event on its output, the module converts this signal and wirelessly sends it to the hub via its built-in RF module. The hub then evaluates the alarm, sends a notification to the app ProSAFE and, in configured cases, also to the central monitoring station (DPPC).
The module can handle a wide range of wired peripheral devices from various manufacturers – from classic PIR motion sensors, through opening detectors, glass break detectors, and emergency buttons, to specialized gas or water leak sensors.
Integration of existing wired elements
Input Board allows already installed wired detectors and sensors to be incorporated into the SAFE system without having to invest in their complete replacement. The module can be placed directly inside the cover of the connected third-party device or in a separate installation box.
Configurable reception of alarm events
The system's behavior when an alarm is triggered at the input is set in the ProSAFE app separately for each Input Board. Up to seven categories of alarm events are available, covering the most common security incidents: intrusion, fire, medical assistance, SOS, gas leak, water leak and sabotage attempt of the system. By combining the Home mode, Delay, and 24-hour zone settings, you can further determine the type of input zone – instant, delayed, interior, or permanently monitored.
Protection against manipulation and sabotage
The module's security is further enhanced by a built-in triaxial accelerometer, which reliably detects sabotage attempts – it can distinguish even subtle movements and vibrations caused by unauthorized manipulation of the module. A separate tamper input additionally allows monitoring of the tamper contact of the connected third-party device.
SAFE Keeper protocol
Communication with the hub is provided by the encrypted two-way radio protocol SAFE Keeper in the 868 MHz band:
- AES-128 encryption with a rolling code,
- frequency hopping – when interference is detected, the system automatically switches to an interference-free frequency band and alerts the user,
- range up to 1 600 m in open space,
- regular connection checks (status signal) – the system immediately reports a module failure.
Adding to the System
Before adding the device
- Install the app ProSAFE and log in to your account.
- Make sure you have a compatible hub added in the app (Hub 2 Plus LTE, SAFE 38300) with a stable internet connection.
- The hub must be in the Disarmed state.
How to add the Input Board to the hub
- Open the hub in the ProSAFE app and tap Device.
- Click + Add device.
- Scan the QR code with the serial number on the bottom of the module and tap Next.
- Once the module is found, tap Next.
- Following the on-screen instructions, turn on the module by switching the switch to position ON and click Next.
- Wait for pairing to complete.
- Enter a name for the module, select an area (zone), and tap Done.
Terminal wiring
The module's screw terminal block contains a total of 6 wires divided into three pairs: power output, alarm input, and tamper input.
| Terminal | Wiring description |
|---|---|
| + / − | Auxiliary power output – 3,3 V DC, max. 10 mA. Used to power the connected wired device (e.g., a PIR sensor or glass break detector) directly from the module's battery. The output mode (always on / off when disarmed / always off) is set in the app – see Settings. |
| ALARM | Alarm input – a pair of terminals forming a loop. Connect the normally open (NO), normally closed (NC), or pulse output of the wired detector to it. The input type (Normally Open / Normally Closed / Pulse) and the alarm type (intrusion, fire, medical assistance, SOS, gas leak, water leak) are set in the ProSAFE app under the item External input. |
| TAMP | Tamper input – a pair of terminals forming a loop for the tamper contact of the connected wired device (e.g., its housing cover). This function must be activated in the module settings under the item External tamper contact and select the NO/NC contact type. |
States
You can view the current status of the module in the ProSAFE app by selecting the Input Board in the hub's device list.
| Parameter | Meaning |
|---|---|
| Online status | Connection between the module and the hub
|
| Temporarily disable | Enable – the module sends alarm and tamper information to the hub / Disable – it does not send it |
| Signal strength | Radio signal level: none / low / weak / good / excellent |
| Battery level | Full / sufficient / medium / insufficient / low |
| External device tamper status | Status of the TAMP terminal – on / off |
| Temperature | Current ambient temperature measured by the module's integrated sensor |
| External input | Whether the ALARM input is functioning normally or is in an error state |
| Motion detection | Whether the module's motion detection function (accelerometer) is enabled |
| 24-hour zone | Enabled / disabled – detection independent of the system's arming status |
| Entry / exit delay | The configured delay times for entry and exit |
| Transmission via repeater | Whether the module communicates with the hub via a signal repeater |
| Chime status | On / off – for door input applications |
| Firmware version | Current firmware version of the module |
Settings
You can change the settings in the ProSAFE app: select Input Board in the hub's device list and tap the edit icon.
| Settings | Value |
|---|---|
| Device configuration | Displays the module's name, type, serial number, and model; edit and save the name |
| Area (zone) | Assigning the module to a system area |
| Zone number | Zone number assigned to the alarm input – cannot be configured |
| Temporarily disable | Enable (default) – the module sends alarm and tamper information to the hub / Disable – it does not send it |
| LED indicator | On (default) / off – when off, the LED does not light regardless of the module's status |
| 24-hour zone | On – the module monitors even when the system is disarmed
|
| Home mode | Including the module in the partial (home) arming of selected devices |
| Home mode delay | Delayed arming within home mode; requires Home mode to be enabled |
| Delay | Entry delay max. 45 s (according to EN 50131-1), exit 0–120 s |
| Siren linkage | The siren sounds when this input triggers an alarm |
| Video linkage | Linking an alarm event to a video channel (channel selection) |
| External input | Alarm type (intrusion, fire, medical assistance, SOS, gas leak, water leak) and ALARM input type: NO / NC / Pulse |
| External tamper contact | Enabling the function and selecting the TAMP contact type: NO / NC |
| Motion detection | The module checks its own movement (accelerometer) every 5 s; if the acceleration threshold is exceeded, it triggers an alarm and the LED indicator flashes
|
| External power supply | Always on – the module always powers the connected device
|
| Chime | When enabled, it triggers the internal siren while the area is disarmed if the connected door contact is open |
| Unusual temperature alarm | Alarm when the set temperature range (min/max) is exceeded |
| Signal strength test | Verification of the radio connection quality at the installation site |
| Detection test | Verifying the functionality of the module and the connected input |
| Transmission power | High / low / automatic – higher power extends the range and increases consumption
|
| Cloud update | Remote firmware update |
| Remove device | Removing the module from the system (swipe left in the device list) |
Signaling
| LED indication | Event |
|---|---|
| Flashing | Transmission power is set to Low (reduced sensitivity mode) |
| Flashing | A motion alarm has been triggered (accelerometer detection) |
| Off | The LED indicator is disabled in settings, or the module is switched off |
Choosing the installation location
The Input Board is placed inside the enclosure of the connected third-party wired device, or in a separate installation box. The module requires a space with minimum dimensions of 105 × 40 × 30 mm.
Signal strength
Before final installation, test the signal strength in the app (Signal strength test) directly at the location where the module will be installed. If the signal is weak, relocate the module, increase the transmission power, or use a signal repeater.
Where not to install the module
- Into metal enclosures or cabinets that shield the radio signal.
- Into an installation box made of material that absorbs radio waves (metal, carbon composites, etc.) – use a box made of material that does not absorb radio waves.
- In damp, dusty, or smoky areas.
- In places exposed to direct sunlight or near heat sources.
- In locations with a weak hub radio signal.
Module installation
The module is supplied with 3 pre-installed CR123A batteries protected by a mylar strip, and 8 spacers of two heights (4 + 4 pcs) for supporting the board.
- Attach 4 spacers into the holes in the module's board.
- Mount the Input Board on a flat surface inside the enclosure of the connected device or in the installation box.
- Remove the mylar strip from the battery compartment – this activates the module's power supply.
- Add the module to the hub in the ProSAFE app (see Adding to the System) and check the signal strength at the installation site.
- Complete the wiring of all 6 terminals (see Terminal wiring).
- Switch the On/Off switch to verify that the module is working.
Functionality Test
After installation and wiring, verify the module is functioning correctly:
- Signal strength test – run a test in the app and verify the quality of the radio connection with the hub.
- Detection test – trigger an alarm on the connected wired device (e.g., open the ALARM loop) and verify that the ProSAFE app recorded the corresponding event.
- Tamper test – open the TAMP loop (or remove the cover of the connected device) and verify that a tamper alert was received.
- Motion alarm test – if the function is enabled, move the module and verify that the LED indicator flashes and a motion alarm appears in the app.
Battery replacement
The module is powered by 3 × CR123A lithium batteries with a lifespan of up to 5 years (without continuous power supply to an external device). The ProSAFE app will notify you of a low battery.
- Disconnect the module from the connected wired device and remove it from the installation site.
- Remove the old batteries and insert 3 new CR123A batteries. Observe the correct polarity according to the markings on the board.
- Return the module to the installation site and reconnect all terminals.
- Switch the power switch to position ON verify functionality and check the battery level in the app.
Maintenance
- Regularly check the battery status and signal strength in the ProSAFE app.
- Check that the terminal connections are tight and clean – a loose terminal can cause a false alarm or input failure.
- Do not expose the module or the connected device to moisture, dust, soot, or direct sunlight.
- After any intervention in the wiring, repeat the detection test and the tamper test.
- Do not disassemble the module and do not use it outside the permitted power supply range.
Technical Specifications
| Interface | |
| Indication | 1× green LED |
| Button | 1× power button (switch) |
| Alarm input | 1× NO / NC / Pulse |
| Tamper input | 1× tamper |
| Power output | 3.3 V, up to 10 mA |
| Function | |
| Tamper contact | Triaxial accelerometer |
| Configurable alarm types | Intrusion, fire, medical assistance, SOS, gas leak, water leak |
| Remote update | Yes (Cloud) |
| Search | Signal strength detection |
| Temperature sensor | Yes – measuring range −10 °C to +55 °C (indoor) |
| Low battery warning | Yes |
| Anti-corrosion level | Yes (basic protection) |
| Wireless transmission – SAFE Keeper | |
| Carrier frequency | 868.0–868.6 MHz |
| Transmitter power (EIRP) | limit 25 mW |
| Communication distance | Up to 1,600 m in open space |
| Communication type | Two-way |
| Encryption | AES128 |
| Frequency hopping | Yes (automatic) |
| General | |
| Power supply | 3× CR123A batteries (included) |
| Current draw | Standby: 45 µA; alarm: 50 mA (avg.) |
| Power consumption | Max. 150 mW (without powering external devices) |
| Battery life | Up to 5 years (without powering external devices) |
| Operating temperature | −10 °C to +55 °C (indoor environment) |
| Operating humidity | 10–90 % RH |
| Product dimensions | 102 × 39 × 21.5 mm |
| Package dimensions | 95 × 43 × 139 mm |
| Weight (net) | 77 g |
| Weight (gross) | 135 g |
| Installation | Mounting in an installation box or inside a third-party device (min. space 105 × 40 × 30 mm) |
| Classification | Module for integrating third-party wired devices into the SAFE system |
| Application | Indoor / outdoor environment (depending on the ingress protection of the chosen installation box) |
| Compatibility | Hub 2 Plus LTE (SAFE 38300), hub v1.001.0000003.0.R.220819 or later, app v1.99.200 or later |
| Certification | CE; EN 50131-1:2006+A1:2009+A2:2017+A3:2020; EN 50131-3:2009; EN 50131-6:2017+A1:2021; EN 50131-5-3:2017; Security grade 2 / Environmental class II |
| Model Designation | SAFE 38180 (ARM320-W2(868)) |
| EAN code | 0728204234945 |
Package Contents
- Input Board – 1 pcs
- Spacers – 8 pcs
- Quick user guide – 1 pcs
- Legal and regulatory information – 1 pcs
- QR code with the user manual – 1 pcs
Safety Notices
- The module may only be installed by a qualified electrician (installer), and only with the device disconnected from the mains.
- Before commissioning, make sure the power supply meets the device's requirements, and operate the module only within the rated range of the power input and output.
- Transport, use, and store the device only within the permitted temperature and humidity range; do not expose it to splashing or dripping liquid.
- Do not disassemble or modify the module – in case of a fault, contact support.
- Do not place the module in damp, dusty, or smoky areas, or in locations exposed to direct sunlight or near heat sources.
- Keep batteries out of reach of children. Do not dispose of them in fire, crush, or cut them – risk of explosion. If a battery is suspected to have been swallowed, seek medical help immediately.
- Replace depleted batteries only with batteries of the same type and model (CR123A).
- Do not dispose of the product with regular household waste – hand it in for recycling through the electrical equipment take-back system.
Warranty
The SAFE Input Board device is covered by a warranty of 36 months from the date of sale. The warranty does not cover batteries or defects caused by failure to follow the instructions in this manual or incorrect installation of connected third-party wired devices.
If you experience any problems with the device, contact technical support first – most situations can be resolved remotely.
Gallery
Need Help?
SAFE HOME europe technical support:
Email: info@safe-home.eu · Phone: (+420) 581 222 262
Website: www.smart-safe.eu