Power Relay is a smart solution for remote control and consumption measurement of electrical devices via the app ProSAFE with a power supply in the range of 100 to 240 V AC. Thanks to the NO/NC relay output (normally open/normally closed contact), which can be easily configured either to bistable mode for permanent switching on or off, or to pulse mode, in which the relay switches on only for a preset duration, this power relay can conveniently control a wide range of devices and elements.
Preface
General
This user manual describes the installation, functions, and operation of the wireless power relay (hereinafter referred to as the "relay"). Before using the device, read this manual carefully and keep it for future reference.
Safety Instructions
The following signal words may appear in the user manual:
| Signal Word | Meaning |
|---|---|
| DANGER | Indicates a high potential hazard that, if not avoided, may result in death or serious injury. |
| WARNING | Indicates a medium or low potential hazard that could cause minor or moderate injury if not avoided. |
| CAUTION | Indicates a potential risk that could lead to property damage, data loss, reduced performance, or an unpredictable outcome. |
| TIP | Provides methods to help you solve a problem or save time. |
| NOTE | Provides additional information, such as emphasis and supplementary text. |
Revision History
| Version | Revision Content | Release Date |
|---|---|---|
| V1.0.0 | First release. | August 2026 |
Privacy Notice
As a device user or data controller, you may collect personal data of others, such as their face, fingerprints, and license plate number. You must comply with local privacy laws and regulations to protect the legitimate rights and interests of other people by implementing measures that include, among others: providing clear and visible identification to inform people of the existence of the monitored area and providing the required contact information.
About the Manual
- The user manual serves as a reference guide only. There may be minor differences between the information provided and the product.
- We are not liable for any damage resulting from using the product in a manner that does not comply with the instructions in the user manual.
- The manual will be updated according to the latest laws and regulations of the relevant jurisdictions. For detailed information, refer to the printed user manual, scan the QR code, or visit our official website. The manual is for reference purposes only. There may be minor differences between the electronic and paper versions.
- All designs and software are subject to change without prior written notice. Due to product updates, certain differences may occur between the product and the information in the manual. Customer service will provide you with the latest version of the software and supplementary documentation.
- There may be printing errors or discrepancies in the description of functions, operations, and technical data. In the event of doubt or dispute, we reserve the right of final explanation. If the manual (in PDF format) cannot be opened, update your reader software or try a different common reader software.
- All trademarks, registered trademarks, and company names in the manual are the property of their respective owners.
- If you encounter any problems while using the device, visit our website or contact your supplier or customer service.
- In the event of ambiguity or dispute, we reserve the right of final explanation.
Important Safeguards and Warnings
This section contains information on the proper handling of the product, risk prevention, and prevention of property damage. Read it carefully before using the device and follow the instructions provided when using it.
Operating Requirements
- Before use, make sure the device's power supply is working properly.
- Do not unplug the device's power cable while it is switched on.
- Use the device only within its rated power range.
- Transport, use, and store the device within the permitted humidity and temperature conditions.
- Prevent liquids from splashing or dripping onto the device. Make sure there are no liquid-filled objects on the device, to prevent liquid from entering it.
- Do not disassemble the device.
Installation Requirements
- Before switching on, connect the device to the power adapter.
- Strictly comply with local electrical safety standards and make sure the voltage in the area is stable and matches the device's power requirements.
- Do not connect the device to more than one power source. Otherwise, the device could be damaged.
- When working at heights, follow all safety procedures and use the required protective equipment.
- Do not expose the device to direct sunlight or heat sources.
- Do not install the device in damp, dusty, or smoky locations.
- Install the device in a well-ventilated location and do not block its ventilation.
- Use the power adapter or power supply provided by the device manufacturer.
- The power supply must meet the ES1 requirements of IEC 62368-1 and must not exceed PS2. The power supply requirements are governed by the device's rating label.
- Connect Class I electrical appliances to a socket with protective earthing.
Functional Elements
- Antenna – receives and transmits the SAFE Keeper protocol radio signal.
- LED indicator (green) – indicates pairing and the device's power status (see Signaling).
- Power button – switches the device on and off; holding it for 2 s after switching on starts pairing.
- Wiring terminal block – four screw terminals IN (L, N) for the input power supply and OUT (L, N) for the output to the controlled device.
Operating Principle
Power Relay is a wireless power relay for the remote control of devices powered by a voltage of 100–240 V AC. The input terminals are connected to the mains, and the output terminals to the controlled device – an electrical socket, lighting, a fan, a heater, a household appliance, a sliding gate, a pump, or another element within the security or automation system. The built-in relay, according to the user's command from the app ProSAFE, or fully automatically according to a configured scene, closes or opens the electrical circuit, thereby switching the power supply to the connected device on or off.
Controlling switches from the app
Switching the connected device on and off can be controlled directly in the ProSAFE app by tapping the control for the given device in the device list – the Power Relay immediately closes or opens the output contact. The user is informed of the current relay status by a push notification.
Bistable and pulse output mode
The output relay can be configured in the device settings into two modes:
- Bistable mode – the relay permanently closes or opens and remains in that state until the next command. Suitable for permanently switching a powered device on/off (lighting, socket, fan).
- Pulse mode (default) – the relay switches on only for a preset duration (pulse duration) and then automatically returns to standby. Suitable for pulse control (sliding gate, door, electric lock).
You can also select the output contact type – normally open (NO), or normally closed (NC), which is set as the default.
Scenes for automation
Scenes in the ProSAFE app can be used to program relay actions that respond to system events or occur at a set time:
- Scene linked to arming/disarming – the relay closes or opens when the system is armed, disarmed, or switched to Home mode.
- Alarm scene – the relay reacts to an alarm being triggered in the system.
- Time scene – the relay closes or opens at a set time, optionally with repetition.
Scenes can be created and edited remotely directly in the app – the device is therefore ideal not only for alarm installations, but also offers full integration of the SAFE security system into a smart home or building automation, wherever safe wireless control of devices powered by a mains voltage of 100–240 V AC using a relay is needed.
Electrical energy consumption measurement
Thanks to its built-in electricity consumption meter, the Power Relay measures and displays the energy consumed by the connected electrical appliance in the ProSAFE app.
Overvoltage and overheating protection
The device is equipped with advanced overvoltage and overheating protection, which protects both the Power Relay and the connected appliance from damage caused by mains supply deviations or excessive load.
SAFE Keeper protocol
Communication with the hub is provided by the encrypted two-way radio protocol SAFE Keeper in the 868 MHz band:
- AES-128 encryption with a rolling code,
- frequency hopping as protection against interference – when signal interference is detected, the user is notified and the device automatically retunes to an interference-free frequency band,
- range up to 1 200 m in open space,
- regular connection monitoring – the system immediately reports a device outage.
Adding to the System
Before adding the device
- Install the app ProSAFE and log in to your account.
- Make sure you have a compatible hub added in the app (Hub 2 Plus LTE, SAFE 38300) with a stable internet connection.
- The hub must be in the Disarmed state.
How to add Power Relay
- In the ProSAFE app, open your hub and click Device.
- Click + Add device.
- Scan the QR code with the serial number on the device (or on the packaging) and tap Next.
- Once the device is found, click Next.
- Following the on-screen instructions, switch on the device with the power button and tap Next.
- Wait for pairing to complete – successful pairing is confirmed by the LED, which lights up for 1 s, turns off for 0.5 s, and then remains permanently lit.
- Enter the device name, select an area (zone), and tap Done.
States
You can view the current device status in the ProSAFE app by selecting Power Relay in the device list.
| Parameter | Meaning |
|---|---|
| Online status | Connection between the device and the hub
|
| Signal strength | Radio signal level: none / low / weak / good / excellent |
| Input voltage | Current value of the supply voltage at the input terminal |
| Output status | Current status of the output relay – on / off |
| Temporarily disable | Device functionality status
|
| Transmission via repeater | Whether the device communicates with the hub via a signal repeater |
| Firmware version | Current firmware version of the device |
Settings
You can change the settings in the ProSAFE app: select Power Relay in the device list and click the edit icon.
| Settings | Value |
|---|---|
| Device name | Custom device name; shown in the device list and in notifications |
| Area (zone) | Assignment of the device to a system zone |
| Temporarily disable | Enable (default) – the device sends status information to the hub
|
| Output type | Normally open (NO) / normally closed (NC, default) |
| Output mode | Bistable / Pulse (default)
|
| LED indicator | On (default) / off – when off, the LED does not light up regardless of the device's status |
| Scenes | Creating and editing scenes linked to arming/disarming, an alarm, or a schedule |
| Transmission power | High / low / automatic – higher power extends the range and increases consumption |
| Signal strength test | Verification of the radio connection quality at the installation site |
| Cloud update | Remote firmware update |
| Remove device | Deleting the device from the system (swipe left in the device list) |
Signaling
| LED indication | Event |
|---|---|
| Fast green blinking | The device is in binding mode |
| Lit for 1 s, turns off for 0.5 s, then stays permanently lit | Successful pairing with the hub |
| Slow green blinking for 3 s, then turns off | Pairing failed |
| Off | The LED indicator is turned off in the settings, or the device is switched off |
Terminal wiring
The Power Relay input terminals are connected to the mains, the output terminals to the controlled device. The terminal block has four screw terminals:
| Terminal | Description |
|---|---|
| IN (L) | Input phase conductor – supplies phase from the 100–240 V AC |
| IN (N) | Input neutral conductor – supplies neutral from the mains |
| OUT (L) | Output phase conductor to the controlled device – switched on and off by the built-in relay |
| OUT (N) | Output neutral conductor to the controlled device – permanently connected to the IN (N) terminal |
- Disconnect the power supply of the protected circuit at the main circuit breaker.
- Route the wires into the terminal block and secure them by tightening the screws – observe the indicated polarity (IN – input wires from the mains, OUT – output wires to the controlled device).
- Check that all connections in the terminal block are secure and properly tightened.
- Attach the device to the surface using double-sided adhesive tape, or place it in a deep installation box, an appliance enclosure, or a distribution board.
- Restore power at the circuit breaker and verify in the ProSAFE app that the device is online.
Installation
Thanks to its miniature size, Power Relay can easily be placed in a standard flush-mounted installation box in the wall, in an appliance enclosure, in a distribution board, or, using the SAFE DIN Holder holder, simply mounted on a DIN rail. The device can also be attached directly to a surface with double-sided adhesive tape.
- Before final installation, temporarily connect the device and test the signal strength at the installation site (Signal strength test) – the recommended minimum value is 2 bars.
- Turn off the power supply of the protected circuit at the main circuit breaker.
- Connect the wires to the terminal block according to the procedure in the chapter Terminal wiring.
- Place the device in the flush-mounted box, distribution board, appliance enclosure, or on a DIN rail; alternatively, attach it to a flat surface with double-sided tape.
- Restore power and verify in the ProSAFE app that the device is online and the relay responds to commands.
Functionality Test
After installation, verify the correct function of the device:
- Signal strength test – run a test in the app and verify that the signal reaches at least 2 bars.
- Relay control test – switch the output on and off in the app and verify that the connected device responds accordingly.
- Consumption measurement check – for the connected appliance, verify that the app displays the corresponding energy consumption value.
Maintenance
- Regularly check that the screw connections in the terminal block are secure.
- Do not intervene in or modify the connected device while it is live – always disconnect the power at the circuit breaker before any intervention.
- Keep the device dry and protect it from moisture, dust, and excessive heat.
- Regularly check the signal strength and device status in the ProSAFE app.
- Do not disassemble or modify the device – contact technical support in case of a fault.
Technical Specifications
| Interface and functions | |
| Indication | 1× green LED |
| Control Devices | 1× power button |
| Relay output | 1× NO/NC (100–240 V AC, max. 13 A) |
| Remote update | Yes (Cloud) |
| Search | Signal strength detection |
| Test mode | Yes |
| Wireless transmission – SAFE Keeper | |
| Carrier frequency | 868.0–868.6 MHz |
| Transmitter power (EIRP) | limit 25 mW |
| Communication distance | Up to 1,200 m in open space |
| Communication type | Two-way |
| Encryption | AES-128 with rolling code |
| Frequency hopping | Yes (automatic) |
| General | |
| Power supply | 100–240 V AC, 50/60 Hz |
| Operating temperature | −10 °C to +55 °C (indoors) |
| Storage temperature | −10 °C to +55 °C |
| Operating humidity | 10–90 % RH |
| Storage humidity | 10–90 % RH |
| Product dimensions | 39 × 33 × 19 mm (L × W × H) |
| Package dimensions | 95.0 × 59.5 × 30.5 mm (L × W × H) |
| Weight (net) | 45 g |
| Weight (gross) | 60 g |
| Installation | Wall mounting, installation box, DIN rail |
| Housing material | PC + ABS, white |
| Compatibility | Hub 2 Plus LTE (SAFE 38300) |
| Certification | CE |
Package Contents
- Power Relay – 1 pcs
- Double-sided adhesive tape – 1 pcs
- QR code with serial number – 1 pcs
- Quick user guide – 1 pcs
- Legal and regulatory information – 1 pcs
Safety Notices
- Before installation, make sure the power supply meets the device's requirements and that the mains voltage is stable.
- Operate the device only within the rated range of the power input and output; do not exceed the maximum relay output load of 13 A.
- Do not connect the device to more than one power source.
- Do not allow liquids to drip or splash onto the device, and make sure no objects containing liquid are placed above it.
- Do not place the device in locations exposed to direct sunlight or near heat sources; protect it from moisture, dust, and soot.
- Install in a well-ventilated location and do not block its ventilation.
- Transport, use, and store the device only within the permitted temperature and humidity range.
- Do not dispose of the product with regular household waste – hand it in for recycling through the electrical equipment take-back system.
Warranty
The SAFE Power Relay device is provided with a warranty of 36 months from the date of sale. The warranty does not cover defects caused by failure to follow the instructions in this manual, incorrect installation, or wiring outside the permitted parameters.
If you experience any problems with the device, contact technical support first – most situations can be resolved remotely.
Gallery
Need Help?
SAFE HOME europe technical support:
Email: info@safe-home.eu · Phone: (+420) 581 222 262
Website: www.smart-safe.eu