Product Manuals / Central control units

Wireless power relay compatible with the ProSAFE app
SAFE Power Relay (SAFE 38186)

User Manual

Updated 20. 8. 2026

Product Page Datalist (PDF)
SAFE Power Relay – wireless power relay

Power Relay is a smart solution for remote control and consumption measurement of electrical devices via the app ProSAFE with a power supply in the range of 100 to 240 V AC. Thanks to the NO/NC relay output (normally open/normally closed contact), which can be easily configured either to bistable mode for permanent switching on or off, or to pulse mode, in which the relay switches on only for a preset duration, this power relay can conveniently control a wide range of devices and elements.

1 200 mradio signal range
13 Amax. current load
100–240 VAC supply voltage
39×33×19 mmdevice dimensions
45 gweight
AES-128SAFE Keeper encryption
100-240 V AC, 50/60 Hz
Electrical energy consumption measurement function
Configurable NC/NO relay output contact
Radio signal range up to 1200 m
Cloud-based device firmware update
Easy control of connected electrical devices
Relay control via the ProSAFE mobile app
Push notifications about the current relay status
Data encryption using the AES algorithm with rolling code
Maximum current load of 13 A at 100-240 V AC
Scenes for automation and control of electrical devices
Overvoltage and overheating protection
Adding the device to the system by scanning a QR code
Two-way information transfer between devices
Automatic retuning to an interference-free channel
Low power consumption (up to 1 W)
Mounting in a flush-mounted box or on a DIN rail
Protection against radio signal interference

Preface

General

This user manual describes the installation, functions, and operation of the wireless power relay (hereinafter referred to as the "relay"). Before using the device, read this manual carefully and keep it for future reference.

Safety Instructions

The following signal words may appear in the user manual:

Signal WordMeaning
DANGERIndicates a high potential hazard that, if not avoided, may result in death or serious injury.
WARNINGIndicates a medium or low potential hazard that could cause minor or moderate injury if not avoided.
CAUTIONIndicates a potential risk that could lead to property damage, data loss, reduced performance, or an unpredictable outcome.
TIPProvides methods to help you solve a problem or save time.
NOTEProvides additional information, such as emphasis and supplementary text.

Revision History

VersionRevision ContentRelease Date
V1.0.0First release.August 2026

Privacy Notice

As a device user or data controller, you may collect personal data of others, such as their face, fingerprints, and license plate number. You must comply with local privacy laws and regulations to protect the legitimate rights and interests of other people by implementing measures that include, among others: providing clear and visible identification to inform people of the existence of the monitored area and providing the required contact information.

About the Manual

Important Safeguards and Warnings

This section contains information on the proper handling of the product, risk prevention, and prevention of property damage. Read it carefully before using the device and follow the instructions provided when using it.

Operating Requirements

CAUTION

Installation Requirements

WARNING
CAUTION

Functional Elements

Functional elements of the Power Relay – numbered diagram
Functional elements of the Power Relay
  1. Antenna – receives and transmits the SAFE Keeper protocol radio signal.
  2. LED indicator (green) – indicates pairing and the device's power status (see Signaling).
  3. Power button – switches the device on and off; holding it for 2 s after switching on starts pairing.
  4. Wiring terminal block – four screw terminals IN (L, N) for the input power supply and OUT (L, N) for the output to the controlled device.

Operating Principle

Power Relay is a wireless power relay for the remote control of devices powered by a voltage of 100–240 V AC. The input terminals are connected to the mains, and the output terminals to the controlled device – an electrical socket, lighting, a fan, a heater, a household appliance, a sliding gate, a pump, or another element within the security or automation system. The built-in relay, according to the user's command from the app ProSAFE, or fully automatically according to a configured scene, closes or opens the electrical circuit, thereby switching the power supply to the connected device on or off.

Controlling switches from the app

Switching the connected device on and off can be controlled directly in the ProSAFE app by tapping the control for the given device in the device list – the Power Relay immediately closes or opens the output contact. The user is informed of the current relay status by a push notification.

Controlling the device switch in the ProSAFE app (example)
Controlling the switch in the ProSAFE app (example)

Bistable and pulse output mode

The output relay can be configured in the device settings into two modes:

You can also select the output contact type – normally open (NO), or normally closed (NC), which is set as the default.

Scenes for automation

Scenes in the ProSAFE app can be used to program relay actions that respond to system events or occur at a set time:

Scenes can be created and edited remotely directly in the app – the device is therefore ideal not only for alarm installations, but also offers full integration of the SAFE security system into a smart home or building automation, wherever safe wireless control of devices powered by a mains voltage of 100–240 V AC using a relay is needed.

Electrical energy consumption measurement

Thanks to its built-in electricity consumption meter, the Power Relay measures and displays the energy consumed by the connected electrical appliance in the ProSAFE app.

Overvoltage and overheating protection

The device is equipped with advanced overvoltage and overheating protection, which protects both the Power Relay and the connected appliance from damage caused by mains supply deviations or excessive load.

SAFE Keeper protocol

Communication with the hub is provided by the encrypted two-way radio protocol SAFE Keeper in the 868 MHz band:

Adding to the System

Adding a device by scanning a QR code (example)
Adding a device by scanning a QR code (example)

Before adding the device

  1. Install the app ProSAFE and log in to your account.
  2. Make sure you have a compatible hub added in the app (Hub 2 Plus LTE, SAFE 38300) with a stable internet connection.
  3. The hub must be in the Disarmed state.
Requires app version 1.99.200 or later and hub firmware v1.001.0000003.0.R.220819 or later.

How to add Power Relay

  1. In the ProSAFE app, open your hub and click Device.
  2. Click + Add device.
  3. Scan the QR code with the serial number on the device (or on the packaging) and tap Next.
  4. Once the device is found, click Next.
  5. Following the on-screen instructions, switch on the device with the power button and tap Next.
  6. Wait for pairing to complete – successful pairing is confirmed by the LED, which lights up for 1 s, turns off for 0.5 s, and then remains permanently lit.
  7. Enter the device name, select an area (zone), and tap Done.
If pairing fails (the LED blinks slowly for 3 s and then turns off), check that the hub is online and in the Disarmed state, and repeat the procedure.

States

You can view the current device status in the ProSAFE app by selecting Power Relay in the device list.

ParameterMeaning
Online statusConnection between the device and the hub
  • Online – the device is communicating
  • Offline – loss of connection
Signal strengthRadio signal level: none / low / weak / good / excellent
Input voltageCurrent value of the supply voltage at the input terminal
Output statusCurrent status of the output relay – on / off
Temporarily disableDevice functionality status
  • Enable – the device sends status information to the hub
  • Disable – the device does not send status information to the hub
Transmission via repeaterWhether the device communicates with the hub via a signal repeater
Firmware versionCurrent firmware version of the device

Settings

You can change the settings in the ProSAFE app: select Power Relay in the device list and click the edit icon.

SettingsValue
Device nameCustom device name; shown in the device list and in notifications
Area (zone)Assignment of the device to a system zone
Temporarily disableEnable (default) – the device sends status information to the hub
  • Disable – information is not sent to the hub
Output typeNormally open (NO) / normally closed (NC, default)
Output modeBistable / Pulse (default)
  • In pulse mode, the pulse duration can be set
LED indicatorOn (default) / off – when off, the LED does not light up regardless of the device's status
ScenesCreating and editing scenes linked to arming/disarming, an alarm, or a schedule
Transmission powerHigh / low / automatic – higher power extends the range and increases consumption
Signal strength testVerification of the radio connection quality at the installation site
Cloud updateRemote firmware update
Remove deviceDeleting the device from the system (swipe left in the device list)

Signaling

LED indicationEvent
Fast green blinkingThe device is in binding mode
Lit for 1 s, turns off for 0.5 s, then stays permanently litSuccessful pairing with the hub
Slow green blinking for 3 s, then turns offPairing failed
OffThe LED indicator is turned off in the settings, or the device is switched off

Terminal wiring

The device operates with voltage 100–240 V AC – risk of electric shock. Installation and wiring may only be carried out by a person with appropriate electrical qualification (Installer) in accordance with applicable standards and local regulations for electrical equipment.
Before any manipulation with the terminal block, always disconnect the power supply of the protected circuit at the main circuit breaker and verify the voltage-free state with a suitable measuring instrument. Do not connect the device to more than one power source.

The Power Relay input terminals are connected to the mains, the output terminals to the controlled device. The terminal block has four screw terminals:

TerminalDescription
IN (L)Input phase conductor – supplies phase from the 100–240 V AC
IN (N)Input neutral conductor – supplies neutral from the mains
OUT (L)Output phase conductor to the controlled device – switched on and off by the built-in relay
OUT (N)Output neutral conductor to the controlled device – permanently connected to the IN (N) terminal
The output terminal N is always directly connected to the input terminal N (the neutral conductor passes straight through the device). The built-in relay switches only the phase conductor L between the input and output terminal.
Connecting wires to the IN/OUT (L, N) terminal block
Inserting wires into the terminal block and tightening the screws
  1. Disconnect the power supply of the protected circuit at the main circuit breaker.
  2. Route the wires into the terminal block and secure them by tightening the screws – observe the indicated polarity (IN – input wires from the mains, OUT – output wires to the controlled device).
  3. Check that all connections in the terminal block are secure and properly tightened.
  4. Attach the device to the surface using double-sided adhesive tape, or place it in a deep installation box, an appliance enclosure, or a distribution board.
  5. Restore power at the circuit breaker and verify in the ProSAFE app that the device is online.
Do not exceed the maximum current load of the relay output 13 A at 100–240 V AC. The connected circuit must be appropriately protected by a separate circuit breaker.

Installation

Thanks to its miniature size, Power Relay can easily be placed in a standard flush-mounted installation box in the wall, in an appliance enclosure, in a distribution board, or, using the SAFE DIN Holder holder, simply mounted on a DIN rail. The device can also be attached directly to a surface with double-sided adhesive tape.

Placing Power Relay in an installation box in the wall
Placing the device in an installation box
  1. Before final installation, temporarily connect the device and test the signal strength at the installation site (Signal strength test) – the recommended minimum value is 2 bars.
  2. Turn off the power supply of the protected circuit at the main circuit breaker.
  3. Connect the wires to the terminal block according to the procedure in the chapter Terminal wiring.
  4. Place the device in the flush-mounted box, distribution board, appliance enclosure, or on a DIN rail; alternatively, attach it to a flat surface with double-sided tape.
  5. Restore power and verify in the ProSAFE app that the device is online and the relay responds to commands.
Install the device in a dry, well-ventilated environment away from direct sunlight and heat sources, protected from moisture, dust, and soot. Do not block its ventilation.

Functionality Test

After installation, verify the correct function of the device:

  1. Signal strength test – run a test in the app and verify that the signal reaches at least 2 bars.
  2. Relay control test – switch the output on and off in the app and verify that the connected device responds accordingly.
  3. Consumption measurement check – for the connected appliance, verify that the app displays the corresponding energy consumption value.

Maintenance

Technical Specifications

Interface and functions
Indication1× green LED
Control Devices1× power button
Relay output1× NO/NC (100–240 V AC, max. 13 A)
Remote updateYes (Cloud)
SearchSignal strength detection
Test modeYes
Wireless transmission – SAFE Keeper
Carrier frequency868.0–868.6 MHz
Transmitter power (EIRP)limit 25 mW
Communication distanceUp to 1,200 m in open space
Communication typeTwo-way
EncryptionAES-128 with rolling code
Frequency hoppingYes (automatic)
General
Power supply100–240 V AC, 50/60 Hz
Operating temperature−10 °C to +55 °C (indoors)
Storage temperature−10 °C to +55 °C
Operating humidity10–90 % RH
Storage humidity10–90 % RH
Product dimensions39 × 33 × 19 mm (L × W × H)
Package dimensions95.0 × 59.5 × 30.5 mm (L × W × H)
Weight (net)45 g
Weight (gross)60 g
InstallationWall mounting, installation box, DIN rail
Housing materialPC + ABS, white
CompatibilityHub 2 Plus LTE (SAFE 38300)
CertificationCE

Package Contents

Power Relay package contents
  1. Power Relay – 1 pcs
  2. Double-sided adhesive tape – 1 pcs
  3. QR code with serial number – 1 pcs
  4. Quick user guide – 1 pcs
  5. Legal and regulatory information – 1 pcs

Safety Notices

The device is designed for connection to a voltage of 100–240 V AC. Installation, wiring, and any intervention in the terminal block may only be carried out by a person with appropriate electrical qualification (Installer). Always disconnect the power at the main circuit breaker before any intervention.

Warranty

The SAFE Power Relay device is provided with a warranty of 36 months from the date of sale. The warranty does not cover defects caused by failure to follow the instructions in this manual, incorrect installation, or wiring outside the permitted parameters.

If you experience any problems with the device, contact technical support first – most situations can be resolved remotely.

Gallery

Need Help?

SAFE HOME europe technical support:
Email: info@safe-home.eu  ·  Phone: (+420) 581 222 262
Website: www.smart-safe.eu