Product Manuals / Indoor Security

Wireless water leak detector compatible with the ProSAFE app
SAFE Water Guard (SAFE 38210)

User Manual

Updated 20. 8. 2026

Product Page Datalist (PDF)
SAFE Water Guard detector

Water Guard is a very small and compact water leak detector with a 2 in 1 design, which offers two types of installation right away – suitable both against slow seepage and against a sudden flooding of the monitored area, where protecting the detector from being submerged or washed away is important.

1 200 mradio signal range
3 yearsbattery life
IPX5ingress protection rating
3water detection contact probes
24 hcontinuous detection 7 days a week
2-in-1housing design – free-standing or fixed installation
Water leak detection using 3 contacts
Radio signal range up to 1200 m
Cloud-based device firmware update
24 hActive 24 hours a day
Simple device installation
Data encryption using the AES algorithm with rolling code
Two-way information transfer between devices
Up to 4 years of battery operation
Automatic alarm cancellation once the water drains away
Adding the device to the system by scanning a QR code
Integrated temperature sensor
2 V 1Transformers unique 2-in-1 housing design
Waterproof device housing with IPX5 protection rating
Protection against radio signal interference

Preface

General

This user manual describes the installation, functions, and operation of the wireless water leak detector (hereinafter referred to as the “detector”). Before using the device, read this manual carefully and keep it for future reference.

Safety Instructions

The following signal words may appear in the user manual:

Signal WordMeaning
DANGERIndicates a high potential hazard that, if not avoided, may result in death or serious injury.
WARNINGIndicates a medium or low potential hazard that could cause minor or moderate injury if not avoided.
CAUTIONIndicates a potential risk that could lead to property damage, data loss, reduced performance, or an unpredictable outcome.
TIPProvides methods to help you solve a problem or save time.
NOTEProvides additional information, such as emphasis and supplementary text.

Revision History

VersionRevision ContentRelease Date
V1.0.0First release.August 2026

Privacy Notice

As a device user or data controller, you may collect personal data of others, such as their face, fingerprints, and license plate number. You must comply with local privacy laws and regulations to protect the legitimate rights and interests of other people by implementing measures that include, among others: providing clear and visible identification to inform people of the existence of the monitored area and providing the required contact information.

About the Manual

Important Safeguards and Warnings

This section contains information on the proper handling of the product, risk prevention, and prevention of property damage. Read it carefully before using the device and follow the instructions provided when using it.

Operating Requirements

CAUTION

Installation Requirements

WARNING
CAUTION

Functional Elements

Functional elements of the Water Guard detector – numbered diagram
Functional elements of the Water Guard detector
  1. LED indicator (green) – indicates binding, alarm, and sensitivity test mode (see Signaling).
  2. Negative probes – a pair of fixed contacts on the bottom of the device for detecting water.
  3. Positive probe – a height-adjustable contact used to set the detection sensitivity.
  4. Power switch – turns the device on and off.

Operating Principle

Water Guard detects a water leak using three contact probes on the bottom of the device – two fixed negative probes and one height-adjustable positive probe. As soon as the water level reaches the probes, the circuit between them closes and the detector immediately sends an alarm event to the hub. The user then immediately receives a notification in the ProSAFE.

Water leak detection using 3 contacts

High sensitivity thanks to three special contact probes ensures the detector immediately detects even the smallest water leak – whether it is slow seepage or a sudden flooding of the monitored area.

Adjustable detection sensitivity

The height of the positive probe can be continuously adjusted by turning it. Turning it clockwise moves the probe closer to the floor and increases the detection sensitivity (even a small amount of water will trigger an alarm). Turning it counterclockwise decreases the sensitivity.

Automatic alarm cancellation once the water drains away

Once the water drains away from the probes or dries up and the circuit opens, the detector automatically ends the alarm state and sends information about the return to normal status to the ProSAFE app.

Unusual temperature alarm

The integrated temperature sensor measures the ambient temperature at the installation site with an accuracy of ±1 °C. The settings allow you to define minimum and maximum temperature limits – if they are exceeded, the detector triggers an alarm, and once the temperature returns to the set range, it sends information about the return to normal conditions. This function is useful, for example, for detecting a floor heating failure.

2-in-1 housing design

The unique housing allows the detector to be simply placed freely on the floor at a location where there is a risk of water leakage, or it can be split apart – only the compact sensor with three contacts then remains on the floor, while the detector body with the electronics is securely mounted higher up on the wall or on the mounting panel, out of reach of any sudden flooding or being washed away.

SAFE Keeper protocol

Communication with the hub is provided by the encrypted two-way radio protocol SAFE Keeper in the 868 MHz band:

Adding to the System

Adding a device by scanning a QR code
Adding a device by scanning a QR code

Before adding the device

  1. Install the app ProSAFE and log in to your account.
  2. Make sure you have a compatible hub added in the app (Hub 2 Plus LTE, SAFE 38300) with a stable internet connection.
  3. The hub must be in the Disarmed state.
App version 1.99.300 or later and hub firmware v1.001.0000004.0 or later are required.

How to add Water Guard

  1. In the ProSAFE app, open your hub and click Device.
  2. Click + Add device.
  3. Scan the QR code with the serial number on the bottom of the detector and click Next.
  4. Once the detector is found, click Next.
  5. Following the on-screen instructions, turn on the detector by switching the power switch and click Next.
  6. Wait for pairing to complete – successful pairing is confirmed by the LED lighting up for 2 seconds.
  7. Enter the detector name, select the area (zone), and click Done.
If binding fails (the LED blinks slowly 3 times), check that the hub is online and in the Disarmed state, and repeat the procedure.

States

You can view the current detector status in the ProSAFE app by selecting the detector in the Devices list.

ParameterMeaning
Online statusConnection between the detector and the hub
  • Online – the detector is communicating
  • Offline – loss of connection
Signal strengthRadio signal level: none / low / weak / good / excellent
Battery levelFull / sufficient / medium / insufficient / low
Water leak statusNormal / Alarm
Temporarily disableEnable – the detector sends alarm messages to the hub / Disable – it does not
Transmission via repeaterWhether the detector communicates with the hub via a signal repeater
Firmware versionCurrent detector firmware version

Settings

You can change the settings in the ProSAFE app: select the detector in the Devices list and click the edit icon.

SettingsValue
Device nameCustom detector name; shown in the device list and in notifications
Area (zone)Assigning the detector to a system area
Temporarily disableEnable (default) – the detector sends alarm messages to the hub / Disable – it does not
LED indicatorOn (default) / off – when off, the LED does not light up regardless of the device's status
Siren linkageThe siren sounds when this detector triggers an alarm
Video linkageWhen an alarm occurs, the selected video channel is linked and the alarm video is saved
Video channelSelection of the video channel to link with the alarm
Temperature detectionAlarm when the set temperature range (min/max) at the installation site is exceeded
Transmission powerHigh / low / automatic – higher power extends the range and increases consumption
  • When Low is selected, the device operates at a reduced range (reduced sensitivity mode)
  • It is recommended to select Low during installation, then switch to High or Automatic
Signal strength testVerification of the radio connection quality at the installation site
Detection testVerifying detector functionality
Cloud updateRemote firmware update
Remove deviceDeleting the detector from the system (swipe left in the Devices list)

Signaling

LED indicationEvent
Fast green blinking after pressing and holding the button for 2 sTurning on the device and entering binding mode
Lights up green for 2 sSuccessful pairing with the hub
Slow green blinking 3 timesPairing failed
Fast green blinking for 100 s, then turns offSensitivity test mode
Briefly lights up green (0.4 s)Water has reached the probes – an alarm has been triggered
OffThe LED indicator is turned off in the settings, or the device is switched off

Choosing the installation location

Water Guard is designed to detect water leaks from indoor plumbing, bathtubs, sinks, washing machines, dishwashers, water heaters, storage tanks, or pool filtration equipment. Place the detector at the lowest point of the monitored area, where leaking water would most likely reach first.

Placement on the floor

Water Guard detector placed on the floor at the point where leaking water flows
Place the detector at the lowest point that leaking water is likely to reach

For free-standing installation, place the detector directly on the floor so that its bottom side with the three contact probes is in direct contact with the floor at the expected leak location.

Setting the probe sensitivity

Before final installation, set the height of the positive probe according to the floor type and the required sensitivity – smooth floors (tiles, PVC) usually require a lower probe position (higher sensitivity) than uneven surfaces.

Signal strength

Before final installation, test the signal strength in the app (Signal strength test). If the signal is weak, move the detector or use a signal repeater.

Where not to install the detector

  1. In places exposed to direct sunlight or near heat sources.
  2. In damp, dusty, or smoky areas.
  3. In poorly ventilated spaces – do not block the device's ventilation.
  4. In locations with a weak hub radio signal.

Detector installation

Water Guard supports two installation methods – free-standing installation (placing the entire device on the floor) and fixed installation (splitting it into a compact sensor on the floor and the detector body mounted higher on the wall or on a mounting panel).

Free-standing installation (placing on the floor)

Free-standing installation: attaching the back cover, adjusting the probe sensitivity, and placing the detector on the floor
Free-standing installation: A) attaching the back cover by turning it, B) adjusting the sensitivity of the positive probe, C) placing the detector on the floor
  1. Turn the detector body in the direction of the arrow until the back cover clicks into place.
  2. Set the height of the positive probe using the sensitivity adjustment screw (turning it clockwise increases the sensitivity, turning it counterclockwise decreases it).
  3. Place the detector on the floor at the location where a water leak may occur.

Fixed installation (mounting on a wall or mounting panel)

Fixed installation: removing the mounting panel, drilling and securing with screws, attaching the detector, and adjusting the probe sensitivity
Fixed installation: A) removing the mounting panel, B) drilling holes and securing the panel with screws, C) attaching the detector to the panel, D) adjusting the sensitivity of the positive probe
  1. Turn the mounting panel in the direction of the arrow and remove it from the detector.
  2. Drill 2 holes in the wall according to the hole positions and insert the wall plugs. Use suitable screws and a screwdriver to attach the back cover (mounting panel) to the wall.
  3. Secure the detector body in the mounting panel by sliding it in the direction of the arrow.
  4. Place the compact sensor with three contacts on the floor at the expected water leak location and set the height of the positive probe using the sensitivity adjustment screw.
Alternatively, the mounting panel can be attached using the included double-sided adhesive tape – no drilling required.

Functionality Test

After installation, verify the correct function of the detector:

  1. Signal strength test – run a test in the app and verify the quality of the radio connection with the hub.
  2. Detection test – start the detector test in the app and verify that the device responds.
  3. Probe sensitivity test – apply a small amount of water to the probes and verify that the LED indicator briefly (0.4 s) flashes green and a water leak alarm notification is received in the ProSAFE app.
After the test, thoroughly dry the probes and the floor under the detector, and verify that the alarm ended by itself in the app.

Battery replacement

The detector is powered by 1× CR123A lithium battery (3 H) with a lifespan of up to 3 years (with one alarm activation per day). The ProSAFE app will notify you of a low battery.

Battery replacement: releasing the back cover, removing and inserting the CR123A battery
Battery replacement: A) releasing the back cover and turning off the device, B) loosening the screws and removing the battery, C) inserting the new battery and securing the cover
  1. Turn the detector body in the direction of the arrow until the back cover releases, and turn off the device using the power switch.
  2. Loosen the screws on the back and remove the discharged battery.
  3. Insert a new CR123A battery. Observe the correct polarity.
  4. Tighten the screws, turn on the device using the power switch, and turn the detector body in the direction of the arrow until the back cover clicks into place.
Replace only with a battery of the same type (CR123A). Keep batteries out of reach of children, do not throw them into fire, do not crush or cut them – risk of explosion. If battery ingestion is suspected, seek medical help immediately.

Maintenance

Technical Specifications

Detection parameters
SensorWater leak sensor – 3 contact probes (2× negative, 1× positive)
SensitivityAdjustable via the height of the positive probe
Temperature sensor
Measuring range−15 °C to +65 °C (indoors)
Accuracy / resolution±1 °C / 1 °C
Wireless transmission – SAFE Keeper
Carrier frequency868.0–868.6 MHz
Transmitter power (EIRP)limit 25 mW
Communication distanceUp to 1,200 m in open space
Communication typeTwo-way
EncryptionAES128
Frequency hoppingYes (automatic)
Interface and functions
Indication1× green LED
Control Devices1× power button (switch)
Tamper contactNo
Remote updateYes (cloud)
Low battery notificationYes
Test modeSignal strength test, detection test
General
Power supply1× CR123A battery, 3 V (included)
Power consumptionMax. 144 mW
Current draw≤28.5 µA (operation), ≤5.8 mA (alarm)
Battery life3 years with one alarm activation per day
Operating temperature−10 °C to +55 °C (indoors)
Operating humidity10–90 % RH
Storage temperature / humidity−10 °C to +55 °C / 10–90% RH
Ingress protection ratingIPX5
Housing materialPC + ABS, white
Product dimensions84,7 × 84,7 × 32,5 mm
Package dimensions135 × 98 × 56 mm
WeightNet 100 g / gross 181 g
InstallationFreely on the floor, or on a mounting panel / wall
CompatibilityHub 2 Plus LTE (SAFE 38300)
CertificationCE

Package Contents

Water Guard detector package contents
  1. Water Guard detector – 1 pcs
  2. Double-sided adhesive tape – 1 pcs
  3. Mounting kit (screws, wall plugs) – 1 set
  4. Quick user guide – 1 pcs
  5. Legal and regulatory information – 1 pcs
  6. QR code with the user manual – 1 pcs

Safety Notices

Warranty

The SAFE Water Guard device is provided with a warranty of 36 months from the date of sale. The warranty does not cover the battery or defects caused by failure to follow the instructions in this manual.

If you experience any problems with the device, contact technical support first – most situations can be resolved remotely.

Gallery

Need Help?

SAFE HOME europe technical support:
Email: info@safe-home.eu  ·  Phone: (+420) 581 222 262
Website: www.smart-safe.eu