Motion Guard is a wireless indoor PIR motion detector with an advanced digital detection algorithm that reliably recognizes motion in the protected area at a distance of up to 12 meters and ignores the movement of pets weighing up to 18 kg and 50 cm in height. It communicates with the SAFE system using an encrypted protocol SAFE Keeper at a distance of up to 1 600 m in open space.
Preface
General
This user manual introduces the installation, functions, and operation of the wireless indoor PIR motion detector (hereinafter referred to as the "detector"). Before using the device, please read this manual carefully and keep it for future reference.
Safety Instructions
The following signal words may appear in the user manual:
| Signal Word | Meaning |
|---|---|
| DANGER | Indicates a high potential hazard that, if not avoided, may result in death or serious injury. |
| WARNING | Indicates a medium or low potential hazard that could cause minor or moderate injury if not avoided. |
| CAUTION | Indicates a potential risk that could lead to property damage, data loss, reduced performance, or an unpredictable outcome. |
| TIP | Provides methods to help you solve a problem or save time. |
| NOTE | Provides additional information, such as emphasis and supplementary text. |
Revision History
| Version | Revision Content | Release Date |
|---|---|---|
| V1.0.0 | First release. | August 2026 |
Privacy Notice
As a device user or data controller, you may collect personal data of others, such as their face, fingerprints, and license plate number. You must comply with local privacy laws and regulations to protect the legitimate rights and interests of other people by implementing measures that include, among others: providing clear and visible identification to inform people of the existence of the monitored area and providing the required contact information.
About the Manual
- The user manual serves as a reference guide only. There may be minor differences between the information provided and the product.
- We are not liable for any damage resulting from using the product in a manner that does not comply with the instructions in the user manual.
- The manual will be updated according to the latest laws and regulations of the relevant jurisdictions. For detailed information, refer to the printed user manual, scan the QR code, or visit our official website. The manual is for reference purposes only. There may be minor differences between the electronic and paper versions.
- All designs and software are subject to change without prior written notice. Due to product updates, certain differences may occur between the product and the information in the manual. Customer service will provide you with the latest version of the software and supplementary documentation.
- There may be printing errors or discrepancies in the description of functions, operations, and technical data. In the event of doubt or dispute, we reserve the right of final explanation. If the manual (in PDF format) cannot be opened, update your reader software or try a different common reader software.
- All trademarks, registered trademarks, and company names in the manual are the property of their respective owners.
- If you encounter any problems while using the device, visit our website or contact your supplier or customer service.
- In the event of ambiguity or dispute, we reserve the right of final explanation.
Important Safeguards and Warnings
This section contains information on the proper handling of the product, risk prevention, and prevention of property damage. Read it carefully before using the device and follow the instructions provided when using it.
Operating Requirements
- Before use, make sure the device's power supply is working properly.
- Do not unplug the device's power cable while it is switched on.
- Use the device only within its rated power range.
- Transport, use, and store the device within the permitted humidity and temperature conditions.
- Prevent liquids from splashing or dripping onto the device. Make sure there are no liquid-filled objects on the device, to prevent liquid from entering it.
- Do not disassemble the device.
Installation Requirements
- Before switching on, connect the device to the power adapter.
- Strictly comply with local electrical safety standards and make sure the voltage in the area is stable and matches the device's power requirements.
- Do not connect the device to more than one power source. Otherwise, the device could be damaged.
- When working at heights, follow all safety procedures and use the required protective equipment.
- Do not expose the device to direct sunlight or heat sources.
- Do not install the device in damp, dusty, or smoky locations.
- Install the device in a well-ventilated location and do not block its ventilation.
- Use the power adapter or power supply provided by the device manufacturer.
- The power supply must meet the ES1 requirements of IEC 62368-1 and must not exceed PS2. The power supply requirements are governed by the device's rating label.
- Connect Class I electrical appliances to a socket with protective earthing.
Functional Elements
- LED indicator (green) – indicates pairing, alarm, and test results (see Signaling).
- Tamper contact – triggers an alarm when the detector is removed from the mounting plate.
- Power switch (ON/OFF) – turns the device on and off.
- Rear cover – covers the battery compartment; opening the cover triggers a tamper alarm.
Operating Principle
Motion Guard detects a moving intruder in the protected area using a dual-element low-noise PIR sensor. An intelligent digital algorithm evaluates infrared radiation within the detector's field of view and reliably distinguishes real human movement from common disturbances such as moving curtains, pets, or temperature fluctuations.
When an alarm is triggered, the detector immediately relays the event to the hub, and the user receives a notification in the ProSAFE.
Protection against false alarms
Digital signal processing enables instant motion evaluation and immediate alarm activation. The detector is resistant to white light up to 2 000 lx – so common artificial interior lighting does not trigger a false alarm.
PET immunity
The detector ignores the movement of pets up to a height of 50 cm and a weight of 18 kg. While it reacts instantly to a person's first steps, four-legged companions can move freely around the room without causing a false alarm.
Temperature compensation
The built-in temperature sensor measures the ambient temperature with an accuracy of ±1 °C and a resolution of 1 °C in the range of −15 °C to +65 °C. Bidirectional digital temperature compensation maintains stable detection sensitivity even at high temperatures – the detection distance does not decrease.
SAFE Keeper protocol
Communication with the hub is provided by the encrypted two-way radio protocol SAFE Keeper in the 868 MHz band:
- AES-128 encryption,
- frequency hopping as protection against interference,
- range up to 1 600 m in open space,
- regular connection checks – the system immediately reports any detector outage.
Adding to the System
Before adding the device
- Install the app ProSAFE and log in to your account.
- Make sure you have a compatible hub added in the app (Hub 2 Plus LTE, SAFE 38300) with a stable internet connection.
- The hub must be in the Disarmed state.
How to add Motion Guard
- In the ProSAFE app, open your hub and click Device.
- Click + Add device.
- Scan the QR code with the serial number on the bottom of the detector and click Next.
- Once the detector is found, click Next.
- Following the on-screen instructions, turn on the detector by switching the power switch to position ON and click Next.
- Wait for pairing to complete – successful pairing is confirmed by the LED lighting up for 2 seconds.
- Before final mounting, check the signal strength of the connection to the hub at the installation location.
- Enter the detector name, select the area (zone), and click Done.
States
You can view the current detector status in the ProSAFE app by selecting the detector in the Devices list.
| Parameter | Meaning |
|---|---|
| Online status | Connection between the detector and the hub
|
| Signal strength | Radio signal level: none / low / weak / good / excellent |
| Battery level | Full / sufficient / medium / insufficient / low |
| Tamper status | Indicates that the detector has been removed from the mounting plate or that the rear cover has been opened |
| Temperature | Current ambient temperature measured by the integrated sensor |
| Sensitivity | Set motion detection sensitivity level |
| 24-hour zone | Enabled / disabled – detection independent of the system's arming status |
| Entry / exit delay | The configured delay times for entry and exit |
| Transmission via repeater | Whether the detector communicates with the hub via a signal repeater |
| Firmware version | Current detector firmware version |
Settings
You can change the settings in the ProSAFE app: select the detector in the Devices list and click the edit icon.
| Settings | Value |
|---|---|
| Device name | Custom detector name; shown in the device list and in notifications |
| Area (zone) | Assigning the detector to a system area |
| Sensitivity | Low / medium / high – choose based on the detection test results |
| LED indicator | On (default) / off – when off, the LED does not light up regardless of the device's status |
| 24-hour zone | Enabled – the detector monitors even when the system is disarmed |
| Home Armed mode | Partial activation of selected devices; optionally with a delay |
| Delay | Entry delay max. 45 s (according to EN 50131-1), exit 0–120 s |
| Siren linkage | The siren sounds when this detector triggers an alarm |
| Transmission power | High / low / automatic
|
| Signal strength test | Verification of the radio connection quality at the installation site |
| Detection test | Verification of the detector's detection zone |
| Cloud update | Remote firmware update |
| Remove device | Deleting the detector from the system (swipe left in the Devices list) |
Signaling
| LED indication | Event |
|---|---|
| Fast green blinking | Pairing mode, or reduced-sensitivity mode (low transmission power) |
| Fast green blinking for 100 s, then turns off | Reduced sensitivity mode active |
| Lights up green for 2 s | Successful pairing with the hub |
| Slow green blinking for 3 s | Pairing failed |
| Continuously lit green | An alarm has been triggered |
| Off | The LED indicator is turned off in the settings, or the device is switched off |
Choosing the installation location
Position the detector so that its field of view covers the intruder's expected path and no obstacles block the view. The recommended installation height is 2–2,4 m (optimum 2.2 m); the stated range of 12 m and field of view of 90° apply specifically to this height.
Signal strength
Before final installation, test the signal strength in the app (Signal strength test). The recommended minimum value is 2 bars. If the signal is weak, move the detector or use a signal repeater.
Detection zone
The detector's field of view is 90° wide (top view) with a vertical spread of 80° (side view). The actual detection range may vary depending on installation height – best results are achieved at a height of 2,2 m. At a lower or higher installation height, the detection zone shifts and may not reliably cover the entire protected area. After installation, always perform a detection test and walk through the protected area – this verifies actual coverage.
Where not to install the detector
- Facing a window or areas exposed to direct sunlight.
- In locations where obstacles block the field of view (curtains, drapes, doors).
- In locations where furniture (e.g., a sofa) blocks part of the field of view.
- Near heat sources – radiators, heaters, or a fireplace.
Detector installation
The detector can be mounted on a wall or in a corner using the mounting plate. Before drilling, we recommend temporarily attaching the detector at the installation location and performing a signal strength test and a detection test.
- Remove the detector body from the mounting plate by sliding it in the direction of the arrow.
- Attach the mounting plate to the chosen location – either using the included double-sided adhesive tape, or drill according to the holes on the plate 4 holes, insert the wall plugs, and screw the plate in place (the mounting kit is included in the package).
- Place the detector body back onto the mounting plate by sliding it in the direction of the arrow.
Functionality Test
After installation, verify the correct function of the detector:
- Signal strength test – run a test in the app and verify that the signal reaches at least 2 bars.
- Detection test – start the test and walk through the protected area; verify that the detector registered motion throughout the entire required zone.
Battery replacement
The detector is powered by 1× CR123A lithium battery (3 H) with a lifespan of up to 4 years. The ProSAFE app will warn you of a low battery.
- Remove the detector body from the mounting plate by sliding it in the direction of the arrow and turn it off using the power switch.
- Open the rear cover by loosening the screws on the back.
- Remove the old battery and insert a new CR123A battery. Observe the correct polarity.
- Close the rear cover and turn on the device using the switch, setting it to position ON.
- Place the detector back onto the mounting plate.
Maintenance
- Keep the detector cover clean – wipe off dust with a dry, soft cloth. Do not use aggressive or corrosive cleaning agents.
- Check that the field of view is not blocked by new furniture, curtains, or other obstacles.
- Regularly check the battery status and signal strength in the ProSAFE app.
- Perform a detection test again after every manipulation of the detector.
- Do not disassemble the detector and protect it from moisture and liquids.
Technical Specifications
| Detection parameters | |
| Detection type | Motion – PIR |
| Sensor | Dual-element low-noise PIR sensor |
| Detection range | 12 m, 90° (at an installation height of 2.2 m) |
| Speed of the detected object | 0.3–3 m/s |
| Ignoring animal movement (PET immunity) | ≤ 18 kg (up to a height of 50 cm) |
| Resistance to white light | 2,000 lx |
| Bidirectional digital temperature compensation | Yes, no reduction in detection distance at high temperature |
| Sensitivity | Adjustable in 3 levels |
| Temperature sensor | |
| Measuring range | −15 °C to +65 °C (indoors) |
| Accuracy / resolution | ±1 °C / 1 °C |
| Wireless transmission – SAFE Keeper | |
| Carrier frequency | 868.0–868.6 MHz |
| Transmitter power (EIRP) | limit 25 mW |
| Communication distance | Up to 1,600 m in open space |
| Communication type | Two-way |
| Encryption | AES-128 |
| Frequency hopping | Yes (anti-jamming protection) |
| Interface and functions | |
| Indication | 1× green LED |
| Control Devices | Power switch |
| Tamper contact | Yes |
| Remote update | Yes (cloud) |
| Low battery notification | Yes |
| Test mode | Signal strength test, detection test |
| General | |
| Power supply | 1× CR123A battery, 3 V (included) |
| Current draw | Standby 9 µA; max. 60 mA |
| Consumption | Max. 120 mW |
| Battery life | Up to 4 years |
| Operating temperature | −10 °C to +55 °C (indoor use); certified range −10 °C to +40 °C |
| Operating humidity | 10–90 % RH |
| Housing material | PC + ABS, white (black variant SAFE 38401) |
| Dimensions | 104.0 × 60.0 × 50.0 mm |
| Package dimensions | 137.0 × 98.0 × 57.0 mm |
| Weight (net) | 100 g |
| Weight (gross) | 186 g |
| Installation | On mounting plate (wall, corner); recommended height 2–2.4 m |
| Compatibility | Hub 2 Plus LTE (SAFE 38300); ProSAFE app v1.91 or later; hub firmware 1.001.0000000.0.R.210303 or later |
| Certification | CE; EN 50131-1:2006+A1:2009+A2:2017+A3:2020; EN 50131-2-2:2017; EN 50131-6:2017; EN 50131-5-3:2017; Security grade 2; Environmental class II |
Package Contents
- Motion Guard detector – 1 pcs
- Double-sided adhesive tape – 1 pcs
- Mounting kit (screws, wall plugs) – 1 set
- QR code with the user manual – 1 pcs
- Quick user guide – 1 pcs
- Legal and regulatory information – 1 pcs
Safety Notices
- Operate and store the device only within the permitted temperature and humidity range.
- Do not place the device in locations exposed to direct sunlight or near heat sources.
- Protect the device from moisture, dust, and liquids.
- Keep the battery out of the reach of children. Do not throw the battery into fire, crush it, or cut it – this may cause an explosion. If battery ingestion is suspected, seek medical help immediately.
- Replace a discharged battery only with a battery of the same type (CR123A).
- Do not dispose of the product with regular household waste – hand it in for recycling through the electrical equipment take-back system.
Warranty
The SAFE Motion Guard device is covered by a warranty 36 months from the date of sale. The warranty does not cover the battery or defects caused by failure to follow the instructions in this manual.
If you experience any problems with the device, contact technical support first – most situations can be resolved remotely.
Gallery
Need Help?
SAFE HOME europe technical support:
Email: info@safe-home.eu · Phone: (+420) 581 222 262
Website: www.smart-safe.eu