Product Manuals / Indoor Security

Wireless indoor PIR motion detector compatible with the ProSAFE app
SAFE Motion Guard (SAFE 38400)

User Manual

Updated 20. 8. 2026

Product Page Datalist (PDF)
SAFE Motion Guard detector

Motion Guard is a wireless indoor PIR motion detector with an advanced digital detection algorithm that reliably recognizes motion in the protected area at a distance of up to 12 meters and ignores the movement of pets weighing up to 18 kg and 50 cm in height. It communicates with the SAFE system using an encrypted protocol SAFE Keeper at a distance of up to 1 600 m in open space.

12 mdetection range
90°field of view
18 kgPET immunity
4 yearsbattery life
1 600 mradio signal range
Ignores animal movement up to 18 kg in weight and 50 cm in height
Motion detection range up to 12 m
Radio signal range up to 1600 m
Cloud-based device firmware update
Security grade 2 according to ČSN EN 50131
Dual PIR sensor for motion detection
Smart bracket for quick and easy installation
Tamper protection against sabotage and unauthorized manipulation of the device
Up to 4 years of battery operation
Adding the device to the system by scanning a QR code
Two-way information transfer between devices
Data encryption using the AES algorithm with rolling code
Integrated temperature sensor
Interference detection
Simple device installation

Preface

General

This user manual introduces the installation, functions, and operation of the wireless indoor PIR motion detector (hereinafter referred to as the "detector"). Before using the device, please read this manual carefully and keep it for future reference.

Safety Instructions

The following signal words may appear in the user manual:

Signal WordMeaning
DANGERIndicates a high potential hazard that, if not avoided, may result in death or serious injury.
WARNINGIndicates a medium or low potential hazard that could cause minor or moderate injury if not avoided.
CAUTIONIndicates a potential risk that could lead to property damage, data loss, reduced performance, or an unpredictable outcome.
TIPProvides methods to help you solve a problem or save time.
NOTEProvides additional information, such as emphasis and supplementary text.

Revision History

VersionRevision ContentRelease Date
V1.0.0First release.August 2026

Privacy Notice

As a device user or data controller, you may collect personal data of others, such as their face, fingerprints, and license plate number. You must comply with local privacy laws and regulations to protect the legitimate rights and interests of other people by implementing measures that include, among others: providing clear and visible identification to inform people of the existence of the monitored area and providing the required contact information.

About the Manual

Important Safeguards and Warnings

This section contains information on the proper handling of the product, risk prevention, and prevention of property damage. Read it carefully before using the device and follow the instructions provided when using it.

Operating Requirements

CAUTION

Installation Requirements

WARNING
CAUTION

Functional Elements

Functional elements of the Motion Guard detector – numbered diagram
Functional elements of the Motion Guard detector
  1. LED indicator (green) – indicates pairing, alarm, and test results (see Signaling).
  2. Tamper contact – triggers an alarm when the detector is removed from the mounting plate.
  3. Power switch (ON/OFF) – turns the device on and off.
  4. Rear cover – covers the battery compartment; opening the cover triggers a tamper alarm.

Operating Principle

Motion Guard detects a moving intruder in the protected area using a dual-element low-noise PIR sensor. An intelligent digital algorithm evaluates infrared radiation within the detector's field of view and reliably distinguishes real human movement from common disturbances such as moving curtains, pets, or temperature fluctuations.

When an alarm is triggered, the detector immediately relays the event to the hub, and the user receives a notification in the ProSAFE.

Protection against false alarms

Digital signal processing enables instant motion evaluation and immediate alarm activation. The detector is resistant to white light up to 2 000 lx – so common artificial interior lighting does not trigger a false alarm.

PET immunity

The detector ignores the movement of pets up to a height of 50 cm and a weight of 18 kg. While it reacts instantly to a person's first steps, four-legged companions can move freely around the room without causing a false alarm.

Temperature compensation

The built-in temperature sensor measures the ambient temperature with an accuracy of ±1 °C and a resolution of 1 °C in the range of −15 °C to +65 °C. Bidirectional digital temperature compensation maintains stable detection sensitivity even at high temperatures – the detection distance does not decrease.

SAFE Keeper protocol

Communication with the hub is provided by the encrypted two-way radio protocol SAFE Keeper in the 868 MHz band:

Adding to the System

Adding a device by scanning a QR code
Adding a device by scanning a QR code

Before adding the device

  1. Install the app ProSAFE and log in to your account.
  2. Make sure you have a compatible hub added in the app (Hub 2 Plus LTE, SAFE 38300) with a stable internet connection.
  3. The hub must be in the Disarmed state.
Requires the ProSAFE app version 1.91 or later and hub firmware 1.001.0000000.0.R.210303 or later.

How to add Motion Guard

  1. In the ProSAFE app, open your hub and click Device.
  2. Click + Add device.
  3. Scan the QR code with the serial number on the bottom of the detector and click Next.
  4. Once the detector is found, click Next.
  5. Following the on-screen instructions, turn on the detector by switching the power switch to position ON and click Next.
  6. Wait for pairing to complete – successful pairing is confirmed by the LED lighting up for 2 seconds.
  7. Before final mounting, check the signal strength of the connection to the hub at the installation location.
  8. Enter the detector name, select the area (zone), and click Done.
If pairing fails (the LED blinks green slowly for 3 s), check that the hub is online and in the Disarmed state, and repeat the procedure.

States

You can view the current detector status in the ProSAFE app by selecting the detector in the Devices list.

ParameterMeaning
Online statusConnection between the detector and the hub
  • Online – the detector is communicating
  • Offline – loss of connection
Signal strengthRadio signal level: none / low / weak / good / excellent
Battery levelFull / sufficient / medium / insufficient / low
Tamper statusIndicates that the detector has been removed from the mounting plate or that the rear cover has been opened
TemperatureCurrent ambient temperature measured by the integrated sensor
SensitivitySet motion detection sensitivity level
24-hour zoneEnabled / disabled – detection independent of the system's arming status
Entry / exit delayThe configured delay times for entry and exit
Transmission via repeaterWhether the detector communicates with the hub via a signal repeater
Firmware versionCurrent detector firmware version

Settings

You can change the settings in the ProSAFE app: select the detector in the Devices list and click the edit icon.

SettingsValue
Device nameCustom detector name; shown in the device list and in notifications
Area (zone)Assigning the detector to a system area
SensitivityLow / medium / high – choose based on the detection test results
LED indicatorOn (default) / off – when off, the LED does not light up regardless of the device's status
24-hour zoneEnabled – the detector monitors even when the system is disarmed
Home Armed modePartial activation of selected devices; optionally with a delay
DelayEntry delay max. 45 s (according to EN 50131-1), exit 0–120 s
Siren linkageThe siren sounds when this detector triggers an alarm
Transmission powerHigh / low / automatic
  • Lower power extends battery life and reduces range
  • At Low power, the detector switches to reduced sensitivity mode (LED flashes) – useful when testing signal strength at the installation site
Signal strength testVerification of the radio connection quality at the installation site
Detection testVerification of the detector's detection zone
Cloud updateRemote firmware update
Remove deviceDeleting the detector from the system (swipe left in the Devices list)

Signaling

LED indicationEvent
Fast green blinkingPairing mode, or reduced-sensitivity mode (low transmission power)
Fast green blinking for 100 s, then turns offReduced sensitivity mode active
Lights up green for 2 sSuccessful pairing with the hub
Slow green blinking for 3 sPairing failed
Continuously lit greenAn alarm has been triggered
OffThe LED indicator is turned off in the settings, or the device is switched off

Choosing the installation location

Position the detector so that its field of view covers the intruder's expected path and no obstacles block the view. The recommended installation height is 2–2,4 m (optimum 2.2 m); the stated range of 12 m and field of view of 90° apply specifically to this height.

Signal strength

Before final installation, test the signal strength in the app (Signal strength test). The recommended minimum value is 2 bars. If the signal is weak, move the detector or use a signal repeater.

Detection zone

The detector's field of view is 90° wide (top view) with a vertical spread of 80° (side view). The actual detection range may vary depending on installation height – best results are achieved at a height of 2,2 m. At a lower or higher installation height, the detection zone shifts and may not reliably cover the entire protected area. After installation, always perform a detection test and walk through the protected area – this verifies actual coverage.

Detection characteristics – top view (90°) and side view (80°), and the effect of installation height on coverage
Detection zone: top view (90°, range 12 m), side view (80°), and the effect of installation height on coverage

Where not to install the detector

  1. Facing a window or areas exposed to direct sunlight.
  2. In locations where obstacles block the field of view (curtains, drapes, doors).
  3. In locations where furniture (e.g., a sofa) blocks part of the field of view.
  4. Near heat sources – radiators, heaters, or a fireplace.
Unsuitable detector locations: facing a window, behind an obstacle, behind furniture, and near a heat source
Do not install the detector facing a window, behind obstacles blocking the view, or near heat sources

Detector installation

The detector can be mounted on a wall or in a corner using the mounting plate. Before drilling, we recommend temporarily attaching the detector at the installation location and performing a signal strength test and a detection test.

  1. Remove the detector body from the mounting plate by sliding it in the direction of the arrow.
  2. Attach the mounting plate to the chosen location – either using the included double-sided adhesive tape, or drill according to the holes on the plate 4 holes, insert the wall plugs, and screw the plate in place (the mounting kit is included in the package).
  3. Place the detector body back onto the mounting plate by sliding it in the direction of the arrow.
Installing the detector: removing it from the plate, attaching the mounting plate, and placing the detector back
Removing the detector from the plate, attaching the mounting plate, and placing the detector back

Functionality Test

After installation, verify the correct function of the detector:

  1. Signal strength test – run a test in the app and verify that the signal reaches at least 2 bars.
  2. Detection test – start the test and walk through the protected area; verify that the detector registered motion throughout the entire required zone.
The detection test activates within the detector's communication interval with the hub (default 60 s) – wait a while after starting the test.

Battery replacement

The detector is powered by 1× CR123A lithium battery (3 H) with a lifespan of up to 4 years. The ProSAFE app will warn you of a low battery.

  1. Remove the detector body from the mounting plate by sliding it in the direction of the arrow and turn it off using the power switch.
  2. Open the rear cover by loosening the screws on the back.
  3. Remove the old battery and insert a new CR123A battery. Observe the correct polarity.
  4. Close the rear cover and turn on the device using the switch, setting it to position ON.
  5. Place the detector back onto the mounting plate.
Battery replacement: removing the detector, opening the rear cover, and replacing the CR123A battery
Removing the detector, opening the rear cover, and replacing the CR123A battery
Use only a battery of the same type (CR123A). Do not throw used batteries into fire, crush, or cut them – this may cause an explosion. Keep batteries out of the reach of children. If battery ingestion is suspected, seek medical help immediately.

Maintenance

Technical Specifications

Detection parameters
Detection typeMotion – PIR
SensorDual-element low-noise PIR sensor
Detection range12 m, 90° (at an installation height of 2.2 m)
Speed of the detected object0.3–3 m/s
Ignoring animal movement (PET immunity)≤ 18 kg (up to a height of 50 cm)
Resistance to white light2,000 lx
Bidirectional digital temperature compensationYes, no reduction in detection distance at high temperature
SensitivityAdjustable in 3 levels
Temperature sensor
Measuring range−15 °C to +65 °C (indoors)
Accuracy / resolution±1 °C / 1 °C
Wireless transmission – SAFE Keeper
Carrier frequency868.0–868.6 MHz
Transmitter power (EIRP)limit 25 mW
Communication distanceUp to 1,600 m in open space
Communication typeTwo-way
EncryptionAES-128
Frequency hoppingYes (anti-jamming protection)
Interface and functions
Indication1× green LED
Control DevicesPower switch
Tamper contactYes
Remote updateYes (cloud)
Low battery notificationYes
Test modeSignal strength test, detection test
General
Power supply1× CR123A battery, 3 V (included)
Current drawStandby 9 µA; max. 60 mA
ConsumptionMax. 120 mW
Battery lifeUp to 4 years
Operating temperature−10 °C to +55 °C (indoor use); certified range −10 °C to +40 °C
Operating humidity10–90 % RH
Housing materialPC + ABS, white (black variant SAFE 38401)
Dimensions104.0 × 60.0 × 50.0 mm
Package dimensions137.0 × 98.0 × 57.0 mm
Weight (net)100 g
Weight (gross)186 g
InstallationOn mounting plate (wall, corner); recommended height 2–2.4 m
CompatibilityHub 2 Plus LTE (SAFE 38300); ProSAFE app v1.91 or later; hub firmware 1.001.0000000.0.R.210303 or later
CertificationCE; EN 50131-1:2006+A1:2009+A2:2017+A3:2020; EN 50131-2-2:2017; EN 50131-6:2017; EN 50131-5-3:2017; Security grade 2; Environmental class II
Dimensional drawing of the detector: 104.0 × 60.0 × 50.0 mm
Detector dimensions (mm)

Package Contents

Motion Guard detector package contents
  1. Motion Guard detector – 1 pcs
  2. Double-sided adhesive tape – 1 pcs
  3. Mounting kit (screws, wall plugs) – 1 set
  4. QR code with the user manual – 1 pcs
  5. Quick user guide – 1 pcs
  6. Legal and regulatory information – 1 pcs

Safety Notices

Warranty

The SAFE Motion Guard device is covered by a warranty 36 months from the date of sale. The warranty does not cover the battery or defects caused by failure to follow the instructions in this manual.

If you experience any problems with the device, contact technical support first – most situations can be resolved remotely.

Gallery

Need Help?

SAFE HOME europe technical support:
Email: info@safe-home.eu  ·  Phone: (+420) 581 222 262
Website: www.smart-safe.eu