Product Manuals / Indoor Security

Wireless PIR motion detector with photo verification compatible with the ProSAFE app
SAFE Motion Cam (SAFE 38450)

User Manual

Updated 20. 8. 2026

Product Page Datalist (PDF)
SAFE Motion Cam detector

Motion Cam is a wireless dual PIR motion detector with a camera that, upon request or motion detection alarm, creates a photo sequence to verify the event. It is a device capable of detecting motion at a distance of up to 12 meters, which reliably ignores the movement of animals in the protected area up to a weight of 18 kg and 50 cm in height.

12 mdetection range
90°PIR field of view
18 kgPET immunity
20×photos after an alarm
4 yearsbattery life
1 600 mradio signal range
Ignores animal movement up to 18 kg in weight and 50 cm in height
Motion detection range up to 12 m
Radio signal range up to 1600 m
Cloud-based device firmware update
Horizontal field of view up to 88°
Integrated camera with a resolution of 1600 x 1200 px
Up to 20 photos after a motion alarm
I R SSmart IR illuminator with automatic adjustment
Dual PIR sensor for motion detection
Integrated temperature sensor
Infrared illuminator for capturing images at night
Captures a sequence of images upon motion detection or on demand
Security grade 2 according to ČSN EN 50131
Up to 4 years of battery operation
Tamper protection against sabotage and unauthorized manipulation of the device
Adding the device to the system by scanning a QR code
Two-way information transfer between devices
Data encryption using the AES algorithm with rolling code
Interference detection

Preface

General

This user manual introduces the installation, functions, and operation of the wireless PIR motion detector with photo verification (hereinafter referred to as the "detector"). Before using the device, please read this manual carefully and keep it for future reference.

Safety Instructions

The following signal words may appear in the user manual:

Signal WordMeaning
DANGERIndicates a high potential hazard that, if not avoided, may result in death or serious injury.
WARNINGIndicates a medium or low potential hazard that could cause minor or moderate injury if not avoided.
CAUTIONIndicates a potential risk that could lead to property damage, data loss, reduced performance, or an unpredictable outcome.
TIPProvides methods to help you solve a problem or save time.
NOTEProvides additional information, such as emphasis and supplementary text.

Revision History

VersionRevision ContentRelease Date
V1.0.0First release.August 2026

Privacy Notice

As a device user or data controller, you may collect personal data of others, such as their face, fingerprints, and license plate number. You must comply with local privacy laws and regulations to protect the legitimate rights and interests of other people by implementing measures that include, among others: providing clear and visible identification to inform people of the existence of the monitored area and providing the required contact information.

About the Manual

Important Safeguards and Warnings

This section contains information on the proper handling of the product, risk prevention, and prevention of property damage. Read it carefully before using the device and follow the instructions provided when using it.

Operating Requirements

CAUTION

Installation Requirements

WARNING
CAUTION

Functional Elements

Functional elements of the Motion Cam detector – numbered diagram
Functional elements of the Motion Cam detector
  1. IR illuminator – provides infrared illumination for capturing images in dark environments.
  2. Camera – captures images when an alarm is triggered or on demand.
  3. LED indicator (green) – signals pairing and alarm (see Signaling).
  4. Tamper contact – triggers an alarm when the detector is released from the mounting bracket.
  5. Bracket tamper contact (optional) – triggers an alarm when the mounting bracket is removed.
  6. Battery compartment – 3× CR123A batteries.
  7. Power switch (ON/OFF) – turns the device on and off.
  8. Rear cover / mounting plate – opening the cover triggers a tamper alarm.

Operating Principle

Motion Cam uses a digital motion detection algorithm that ensures maximum reliability when recognizing motion in the monitored area. The intelligent algorithm can effectively distinguish real human movement from common disturbances such as moving curtains, pets, or temperature fluctuations. When an alarm is triggered, the detector immediately forwards the event to the hub and the user receives a notification in the app ProSAFE.

PET immunity

Based on infrared radiation analysis, the digital algorithm allows the detector to not detect the movement of animals up to a weight of 18 kg and a height of 50 cm. While the detector reacts instantly to a person's first steps, pets can move around freely and calmly without risking a false alarm.

Temperature compensation

Bidirectional digital temperature compensation maintains stable detection sensitivity within the operating temperature range. The built-in temperature sensor also measures the ambient temperature with an accuracy of ±1 °C and allows you to set an unusual temperature alarm – alerts you when set temperature limits are exceeded, which may indicate, for example, a fire or another dangerous situation.

Photo verification and IR illuminator

The integrated 2-megapixel HD camera captures a series of images (up to 20 photos) when an alarm is triggered, at a resolution of up to 1600 × 1200 px, which are immediately sent to the ProSAFE app. This allows the user to reliably verify the cause of the alarm event without having to install a separate camera for continuous area monitoring.

The detector is equipped with a smart IR illuminator with automatic adjustment and a range of up to 12 m – it reacts to a person's first steps based on infrared radiation analysis and automatically switches to black-and-white capture at night, while capturing images in color during the day.

Images can also be captured outside of an alarm event – on demand from the ProSAFE app (the Image testfeature), regardless of the system's security mode. The detector also captures a series of images during an alarm from another event, such as a fire alarm or a flood.

Image transmission – RF-HD

In addition to the standard bidirectional radio transmission of commands and statuses (range up to 1 600 m), the detector uses a separate high-speed channel to transmit captured images to the hub RF-HD with a range of up to 300 m in open space. The quality of this connection can be verified in the app using the RF-HD test.

feature. Image transmission via a signal repeater takes place on a dedicated channel RF-HD. The repeater SAFE Rep (SAFE 38350) supports this channel, allowing it to also forward image data from detectors with photo verification. Older repeaters without RF-HD support forward only status and alarm messages, not images.

SAFE Keeper protocol

Communication with the hub is provided by the encrypted two-way radio protocol SAFE Keeper in the 868 MHz band:

Adding to the System

Adding a device by scanning a QR code
Adding a device by scanning a QR code

Before adding the device

  1. Install the app ProSAFE and log in to your account.
  2. Make sure you have a compatible hub added in the app (Hub 2 Plus LTE, SAFE 38300) with a stable internet connection.
  3. The hub must be in the Disarmed state.
Requires app version 1.99 or later and hub firmware v1.001.R.220625 or later.

How to add Motion Cam

  1. In the ProSAFE app, open your hub and click Device.
  2. Click + Add device.
  3. Scan the QR code with the serial number on the bottom of the detector and click Next.
  4. Once the detector is found, click Next.
  5. Following the on-screen instructions, turn on the detector by switching the power switch to position ON and click Next.
  6. Wait for pairing to complete – successful pairing is confirmed by the LED lighting up for 2 seconds.
  7. Enter the detector name, select the area (zone), and click Done.
If pairing fails (the LED blinks slowly for 3 s), check that the hub is online and in the Disarmed state, and repeat the procedure.

States

You can view the current detector status in the ProSAFE app by selecting the detector in the Devices list.

ParameterMeaning
Temporarily disableStatus of whether the detector's functions are enabled or disabled
  • Enable – the detector sends commands to the hub
  • Disable tamper alarm only – the system ignores only tamper messages
  • Disable – the detector does not send commands to the hub
Online statusConnection between the detector and the hub
  • Online – the detector is communicating
  • Offline – loss of connection
Signal strengthRadio signal level: none / low / weak / good / excellent
Battery levelFull / sufficient / medium / insufficient / low
Tamper statusIndicates that the detector has been removed from the mounting plate or that the cover has been opened
TemperatureCurrent ambient temperature measured by the integrated sensor
SensitivitySet motion detection sensitivity level
24-hour zoneEnabled / disabled – detection independent of the system's arming status
Entry / exit delayThe configured delay times for entry and exit
Transmission via repeaterWhether the detector communicates with the hub via a signal repeater; image transmission requires a repeater with RF-HD channel support (SAFE 38350)
Firmware versionCurrent detector firmware version

Settings

You can change the settings in the ProSAFE app: select the detector in the Devices list and click the edit icon.

SettingsValue
Image testTriggers the detector to capture a series of images; the result can be found in the app's messages
  • Recommended for use during initial installation to find the most suitable location and angle
Device configurationDisplays the name, type, serial number, and model; allows editing of the detector's custom name
Area (zone)Assigning the detector to a system area
Temporarily disableWhether the detector sends commands to the hub
  • Enable (default) – the detector sends commands to the hub
  • Disable tamper alarm only – the system ignores only tamper messages
  • Disable – the detector does not send commands to the hub
Image configurationNumber of images in the sequence (1–10 / 1–20 depending on resolution), interval between images (10, 30, 60, or 120 s), and image resolution (1600×1200, 1280×960, 640×480, 320×240)
  • At a resolution of 1600×1200, the number of images can only be selected within the range of 1–10
LED indicatorOn (default) / off – when off, the LED does not light up regardless of the device's status
Unusual temperature alarmAlarm when the set temperature range (min/max) is exceeded
24-hour zoneEnabled – the detector monitors even when the system is disarmed; when disabled, it monitors only while the system is armed
Home Armed modeSelected devices under the hub will be activated even in this mode
Delay in Home Armed modeThe selected device will be activated with a delay; can only be enabled after Home Armed mode is enabled
DelayEntry delay max. 45 s (according to EN 50131-1), exit 0–120 s
Siren linkageThe siren sounds when this detector triggers an alarm
Signal strength testVerification of the current radio signal strength
Detection testVerification of the detector's functionality and detection zone
RF-HD testVerification of signal strength for image transmission between the detector and the hub
Transmission powerHigh / low / automatic – higher power extends the range and increases consumption
  • Low power switches the detector to reduced sensitivity mode
Cloud updateRemote firmware update
Remove deviceDeleting the detector from the system (swipe left in the Devices list)

Signaling

LED indicationEvent
Fast green blinkingPairing mode, or reduced-sensitivity mode (low transmission power)
Lights up green for 2 sSuccessful pairing with the hub
Slow green blinking for 3 sPairing failed
Continuously lit greenAn alarm has been triggered
OffThe LED indicator is turned off in the settings, or the device is switched off

Choosing the installation location

Position the detector so that its field of view covers the intruder's expected path and no obstacles block the view. The recommended installation height is 2–2,4 m; the stated range of 12 m and field of view of 90° apply to an installation height of 2.2 m.

Signal strength

Before final mounting, test the radio signal strength in the app (Signal strength test) as well as the connection quality for image transmission (RF-HD test). The recommended minimum value is 2 bars. If the signal is weak, move the detector or use a signal repeater (note that it does not transmit images).

Detection and field-of-view zone

The actual detection range may vary depending on installation height. After installation, always perform a detection test and image test – this verifies actual coverage as well as the suitability of the camera angle for photo verification.

Detection characteristics – top view (90°), side view (80°), and the effect of an installation height of 2.2 mChybí obrázek: 38450-fov.svg
Detection zone: top view (a), side view (b), and the effect of installation height (c) – correct only at a height of 2.2 m
The camera's field of view for photo verification is 88° horizontally and 68° vertically – make sure nothing obstructs the captured scene.

Where not to install the detector

  1. Within the field of view of windows exposed to direct sunlight or its reflections.
  2. Facing curtains, blinds, or other moving objects in the field of view.
  3. Near heat sources – radiators, air conditioning, ventilation.
  4. Facing an open fire, fireplace, or other heat-generating appliances.
Suitable and unsuitable detector locations in a room
Suitable (✓) and unsuitable (✗) detector locations in a room

Detector installation

The detector is intended for indoor installation on a wall or in a corner of a room. Before drilling, we recommend temporarily attaching the detector at the installation location and performing a signal strength test and a detection test.

  1. Drill holes into the wall (or corner) according to the holes on the detector's rear cover and insert the wall plugs.
  2. Attach the rear cover to the surface using suitable fasteners (screws, included in the package).
  3. Place the detector body onto the mounting plate and close the rear cover by sliding it in the direction of the arrow.
  4. Tighten the locking screw at the bottom of the device (tightening torque 0.3–0.4 N·m).
Mounting the rear cover on a wall
Wall Mounting
Mounting the rear cover in a corner
Corner mounting
Closing the rear cover and tightening the locking screw to a torque of 0.3–0.4 N·m
Closing the cover and tightening the locking screw (0.3–0.4 N·m)

Functionality Test

After installation, verify the correct function of the detector:

  1. Signal strength test – run a test in the app and verify that the signal reaches at least 2 bars.
  2. RF-HD test – verify the connection quality for image transmission between the detector and the hub.
  3. Detection test – start the test and walk through the protected area; verify that the detector registered motion throughout the entire required zone.
  4. Image test – start capturing test images and check in the app that the scene is captured at the required angle and quality.
The detection test activates within the detector's communication interval with the hub (default 60 s) – wait a while after starting the test.

Battery replacement

The detector is powered by 3× CR123A lithium batteries with a lifespan of up to 4 years (assuming an alarm is triggered 2× per week and a battery efficiency of 70 %). The ProSAFE app will notify you of a low battery.

Loosening the screw, opening the cover, inserting the batteries, and switching the switch to the ON position
Loosening the screw, opening the cover, inserting the batteries (mind the polarity), and turning on the device
  1. Loosen the locking screw at the bottom of the device.
  2. Open the device cover by sliding it in the direction of the arrow.
  3. Remove the old batteries and insert 3 new CR123A batteries. Observe the correct polarity – the "+" symbols on the batteries must match the symbols inside the detector.
  4. Close the device cover by sliding it in the direction of the arrow.
  5. Turn on the device by switching the switch to position ON.
  6. Tighten the locking screw at the bottom (tightening torque 0.3–0.4 N·m).
Always replace all 3 batteries at the same time and use only batteries of the same type (CR123A). Do not throw used batteries into fire and keep them out of reach of children – risk of explosion or serious injury if swallowed.

Maintenance

Technical Specifications

Detection parameters
Detection typeMotion – PIR
SensorDual-element low-noise PIR sensor
Detection range12 m, 90° (at an installation height of 2.2 m)
Speed of the detected object0.3–3 m/s
PET immunityIgnores animals up to a weight of 18 kg and a height of 50 cm
Resistance to white light2000 lx
SensitivityAdjustable in 3 levels
Temperature compensationBidirectional digital
Temperature sensor
Measuring range−15 °C to +65 °C (indoors)
Accuracy / resolution±1 °C / 1 °C
Video and photo verification
Camera field of view88° (H), 68° (V)
Image typeJPEG
Resolution1600×1200; 1280×960; 640×480; 320×240
Frame rate2
Number of images in the sequence1–20 (1–10 at 1600×1200 resolution)
Interval between images10 / 30 / 60 / 120 s
IlluminatorInfrared, range up to 12 m
Day / night modeAutomatic; color (day) / black-and-white (night)
Wireless transmission – SAFE Keeper
Carrier frequency868.0–868.6 MHz
Transmitter power (EIRP)limit 25 mW
Communication distanceRF: up to 1,600 m; RF-HD (image transmission): up to 300 m in open space
Communication typeTwo-way
EncryptionAES128
Frequency hoppingYes (anti-jamming protection)
Interface and functions
Indication1× green LED
Control DevicesPower switch
Tamper contactYes (body contact, optionally bracket contact)
Remote updateYes (cloud)
Low battery notificationYes
Test modeSignal strength test, RF-HD test, detection test, image test
General
Power supply3× CR123A batteries (included)
Current drawStandby 65 µA; alarm day 170 mA (avg.) / 800 mA (max.), night 230 mA (avg.) / 2.8 A (max.)
Battery lifeUp to 4 years (at 2 alarms per week, 70% efficiency)
Operating temperature−10 °C to +55 °C (indoors)
Operating humidity10–90 % RH
Housing materialPC + ABS, white
Dimensions71.0 × 53.2 × 127.6 mm (L × W × H)
Weight202 g (net) / 333 g (gross)
InstallationWall, corner; recommended height 2–2.4 m
CompatibilityHub 2 Plus LTE (SAFE 38300), hub firmware v1.001.R.220625 or later
CertificationCE; EN 50131-1:2006+A1:2009+A2:2017+A3:2020; EN 50131-5-3:2017; EN 50131-6:2017; EN 50130-4:2011+A1:2014; Security grade 2; Environmental class II
Dimensional drawing of the detector: 71.0 × 53.2 × 127.6 mm
Detector dimensions (mm)

Package Contents

Motion Cam detector package contents
  1. Motion Cam detector – 1 pcs
  2. Double-sided adhesive tape – 1 pcs
  3. Mounting kit (screws) – 2 sets
  4. CR123A batteries – 3 pcs
  5. QR code with the user manual – 1 pcs
  6. Quick user guide – 1 pcs
  7. Legal and regulatory information – 1 pcs

Safety Notices

Warranty

The SAFE Motion Cam device is covered by a warranty 36 months from the date of sale. The warranty does not cover batteries or defects caused by failure to follow the instructions in this manual.

If you experience any problems with the device, contact technical support first – most situations can be resolved remotely.

Gallery

Need Help?

SAFE HOME europe technical support:
Email: info@safe-home.eu  ·  Phone: (+420) 581 222 262
Website: www.smart-safe.eu