Motion Cam is a wireless dual PIR motion detector with a camera that, upon request or motion detection alarm, creates a photo sequence to verify the event. It is a device capable of detecting motion at a distance of up to 12 meters, which reliably ignores the movement of animals in the protected area up to a weight of 18 kg and 50 cm in height.
Preface
General
This user manual introduces the installation, functions, and operation of the wireless PIR motion detector with photo verification (hereinafter referred to as the "detector"). Before using the device, please read this manual carefully and keep it for future reference.
Safety Instructions
The following signal words may appear in the user manual:
| Signal Word | Meaning |
|---|---|
| DANGER | Indicates a high potential hazard that, if not avoided, may result in death or serious injury. |
| WARNING | Indicates a medium or low potential hazard that could cause minor or moderate injury if not avoided. |
| CAUTION | Indicates a potential risk that could lead to property damage, data loss, reduced performance, or an unpredictable outcome. |
| TIP | Provides methods to help you solve a problem or save time. |
| NOTE | Provides additional information, such as emphasis and supplementary text. |
Revision History
| Version | Revision Content | Release Date |
|---|---|---|
| V1.0.0 | First release. | August 2026 |
Privacy Notice
As a device user or data controller, you may collect personal data of others, such as their face, fingerprints, and license plate number. You must comply with local privacy laws and regulations to protect the legitimate rights and interests of other people by implementing measures that include, among others: providing clear and visible identification to inform people of the existence of the monitored area and providing the required contact information.
About the Manual
- The user manual serves as a reference guide only. There may be minor differences between the information provided and the product.
- We are not liable for any damage resulting from using the product in a manner that does not comply with the instructions in the user manual.
- The manual will be updated according to the latest laws and regulations of the relevant jurisdictions. For detailed information, refer to the printed user manual, scan the QR code, or visit our official website. The manual is for reference purposes only. There may be minor differences between the electronic and paper versions.
- All designs and software are subject to change without prior written notice. Due to product updates, certain differences may occur between the product and the information in the manual. Customer service will provide you with the latest version of the software and supplementary documentation.
- There may be printing errors or discrepancies in the description of functions, operations, and technical data. In the event of doubt or dispute, we reserve the right of final explanation. If the manual (in PDF format) cannot be opened, update your reader software or try a different common reader software.
- All trademarks, registered trademarks, and company names in the manual are the property of their respective owners.
- If you encounter any problems while using the device, visit our website or contact your supplier or customer service.
- In the event of ambiguity or dispute, we reserve the right of final explanation.
Important Safeguards and Warnings
This section contains information on the proper handling of the product, risk prevention, and prevention of property damage. Read it carefully before using the device and follow the instructions provided when using it.
Operating Requirements
- Before use, make sure the device's power supply is working properly.
- Do not unplug the device's power cable while it is switched on.
- Use the device only within its rated power range.
- Transport, use, and store the device within the permitted humidity and temperature conditions.
- Prevent liquids from splashing or dripping onto the device. Make sure there are no liquid-filled objects on the device, to prevent liquid from entering it.
- Do not disassemble the device.
Installation Requirements
- Before switching on, connect the device to the power adapter.
- Strictly comply with local electrical safety standards and make sure the voltage in the area is stable and matches the device's power requirements.
- Do not connect the device to more than one power source. Otherwise, the device could be damaged.
- When working at heights, follow all safety procedures and use the required protective equipment.
- Do not expose the device to direct sunlight or heat sources.
- Do not install the device in damp, dusty, or smoky locations.
- Install the device in a well-ventilated location and do not block its ventilation.
- Use the power adapter or power supply provided by the device manufacturer.
- The power supply must meet the ES1 requirements of IEC 62368-1 and must not exceed PS2. The power supply requirements are governed by the device's rating label.
- Connect Class I electrical appliances to a socket with protective earthing.
Functional Elements
- IR illuminator – provides infrared illumination for capturing images in dark environments.
- Camera – captures images when an alarm is triggered or on demand.
- LED indicator (green) – signals pairing and alarm (see Signaling).
- Tamper contact – triggers an alarm when the detector is released from the mounting bracket.
- Bracket tamper contact (optional) – triggers an alarm when the mounting bracket is removed.
- Battery compartment – 3× CR123A batteries.
- Power switch (ON/OFF) – turns the device on and off.
- Rear cover / mounting plate – opening the cover triggers a tamper alarm.
Operating Principle
Motion Cam uses a digital motion detection algorithm that ensures maximum reliability when recognizing motion in the monitored area. The intelligent algorithm can effectively distinguish real human movement from common disturbances such as moving curtains, pets, or temperature fluctuations. When an alarm is triggered, the detector immediately forwards the event to the hub and the user receives a notification in the app ProSAFE.
PET immunity
Based on infrared radiation analysis, the digital algorithm allows the detector to not detect the movement of animals up to a weight of 18 kg and a height of 50 cm. While the detector reacts instantly to a person's first steps, pets can move around freely and calmly without risking a false alarm.
Temperature compensation
Bidirectional digital temperature compensation maintains stable detection sensitivity within the operating temperature range. The built-in temperature sensor also measures the ambient temperature with an accuracy of ±1 °C and allows you to set an unusual temperature alarm – alerts you when set temperature limits are exceeded, which may indicate, for example, a fire or another dangerous situation.
Photo verification and IR illuminator
The integrated 2-megapixel HD camera captures a series of images (up to 20 photos) when an alarm is triggered, at a resolution of up to 1600 × 1200 px, which are immediately sent to the ProSAFE app. This allows the user to reliably verify the cause of the alarm event without having to install a separate camera for continuous area monitoring.
The detector is equipped with a smart IR illuminator with automatic adjustment and a range of up to 12 m – it reacts to a person's first steps based on infrared radiation analysis and automatically switches to black-and-white capture at night, while capturing images in color during the day.
Image transmission – RF-HD
In addition to the standard bidirectional radio transmission of commands and statuses (range up to 1 600 m), the detector uses a separate high-speed channel to transmit captured images to the hub RF-HD with a range of up to 300 m in open space. The quality of this connection can be verified in the app using the RF-HD test.
SAFE Keeper protocol
Communication with the hub is provided by the encrypted two-way radio protocol SAFE Keeper in the 868 MHz band:
- AES-128 encryption with a rolling code,
- frequency hopping as protection against interference,
- range up to 1 600 m in open space,
- regular connection checks – the system immediately reports any detector outage.
Adding to the System
Before adding the device
- Install the app ProSAFE and log in to your account.
- Make sure you have a compatible hub added in the app (Hub 2 Plus LTE, SAFE 38300) with a stable internet connection.
- The hub must be in the Disarmed state.
How to add Motion Cam
- In the ProSAFE app, open your hub and click Device.
- Click + Add device.
- Scan the QR code with the serial number on the bottom of the detector and click Next.
- Once the detector is found, click Next.
- Following the on-screen instructions, turn on the detector by switching the power switch to position ON and click Next.
- Wait for pairing to complete – successful pairing is confirmed by the LED lighting up for 2 seconds.
- Enter the detector name, select the area (zone), and click Done.
States
You can view the current detector status in the ProSAFE app by selecting the detector in the Devices list.
| Parameter | Meaning |
|---|---|
| Temporarily disable | Status of whether the detector's functions are enabled or disabled
|
| Online status | Connection between the detector and the hub
|
| Signal strength | Radio signal level: none / low / weak / good / excellent |
| Battery level | Full / sufficient / medium / insufficient / low |
| Tamper status | Indicates that the detector has been removed from the mounting plate or that the cover has been opened |
| Temperature | Current ambient temperature measured by the integrated sensor |
| Sensitivity | Set motion detection sensitivity level |
| 24-hour zone | Enabled / disabled – detection independent of the system's arming status |
| Entry / exit delay | The configured delay times for entry and exit |
| Transmission via repeater | Whether the detector communicates with the hub via a signal repeater; image transmission requires a repeater with RF-HD channel support (SAFE 38350) |
| Firmware version | Current detector firmware version |
Settings
You can change the settings in the ProSAFE app: select the detector in the Devices list and click the edit icon.
| Settings | Value |
|---|---|
| Image test | Triggers the detector to capture a series of images; the result can be found in the app's messages
|
| Device configuration | Displays the name, type, serial number, and model; allows editing of the detector's custom name |
| Area (zone) | Assigning the detector to a system area |
| Temporarily disable | Whether the detector sends commands to the hub
|
| Image configuration | Number of images in the sequence (1–10 / 1–20 depending on resolution), interval between images (10, 30, 60, or 120 s), and image resolution (1600×1200, 1280×960, 640×480, 320×240)
|
| LED indicator | On (default) / off – when off, the LED does not light up regardless of the device's status |
| Unusual temperature alarm | Alarm when the set temperature range (min/max) is exceeded |
| 24-hour zone | Enabled – the detector monitors even when the system is disarmed; when disabled, it monitors only while the system is armed |
| Home Armed mode | Selected devices under the hub will be activated even in this mode |
| Delay in Home Armed mode | The selected device will be activated with a delay; can only be enabled after Home Armed mode is enabled |
| Delay | Entry delay max. 45 s (according to EN 50131-1), exit 0–120 s |
| Siren linkage | The siren sounds when this detector triggers an alarm |
| Signal strength test | Verification of the current radio signal strength |
| Detection test | Verification of the detector's functionality and detection zone |
| RF-HD test | Verification of signal strength for image transmission between the detector and the hub |
| Transmission power | High / low / automatic – higher power extends the range and increases consumption
|
| Cloud update | Remote firmware update |
| Remove device | Deleting the detector from the system (swipe left in the Devices list) |
Signaling
| LED indication | Event |
|---|---|
| Fast green blinking | Pairing mode, or reduced-sensitivity mode (low transmission power) |
| Lights up green for 2 s | Successful pairing with the hub |
| Slow green blinking for 3 s | Pairing failed |
| Continuously lit green | An alarm has been triggered |
| Off | The LED indicator is turned off in the settings, or the device is switched off |
Choosing the installation location
Position the detector so that its field of view covers the intruder's expected path and no obstacles block the view. The recommended installation height is 2–2,4 m; the stated range of 12 m and field of view of 90° apply to an installation height of 2.2 m.
Signal strength
Before final mounting, test the radio signal strength in the app (Signal strength test) as well as the connection quality for image transmission (RF-HD test). The recommended minimum value is 2 bars. If the signal is weak, move the detector or use a signal repeater (note that it does not transmit images).
Detection and field-of-view zone
The actual detection range may vary depending on installation height. After installation, always perform a detection test and image test – this verifies actual coverage as well as the suitability of the camera angle for photo verification.
Where not to install the detector
- Within the field of view of windows exposed to direct sunlight or its reflections.
- Facing curtains, blinds, or other moving objects in the field of view.
- Near heat sources – radiators, air conditioning, ventilation.
- Facing an open fire, fireplace, or other heat-generating appliances.
Detector installation
The detector is intended for indoor installation on a wall or in a corner of a room. Before drilling, we recommend temporarily attaching the detector at the installation location and performing a signal strength test and a detection test.
- Drill holes into the wall (or corner) according to the holes on the detector's rear cover and insert the wall plugs.
- Attach the rear cover to the surface using suitable fasteners (screws, included in the package).
- Place the detector body onto the mounting plate and close the rear cover by sliding it in the direction of the arrow.
- Tighten the locking screw at the bottom of the device (tightening torque 0.3–0.4 N·m).
Functionality Test
After installation, verify the correct function of the detector:
- Signal strength test – run a test in the app and verify that the signal reaches at least 2 bars.
- RF-HD test – verify the connection quality for image transmission between the detector and the hub.
- Detection test – start the test and walk through the protected area; verify that the detector registered motion throughout the entire required zone.
- Image test – start capturing test images and check in the app that the scene is captured at the required angle and quality.
Battery replacement
The detector is powered by 3× CR123A lithium batteries with a lifespan of up to 4 years (assuming an alarm is triggered 2× per week and a battery efficiency of 70 %). The ProSAFE app will notify you of a low battery.
- Loosen the locking screw at the bottom of the device.
- Open the device cover by sliding it in the direction of the arrow.
- Remove the old batteries and insert 3 new CR123A batteries. Observe the correct polarity – the "+" symbols on the batteries must match the symbols inside the detector.
- Close the device cover by sliding it in the direction of the arrow.
- Turn on the device by switching the switch to position ON.
- Tighten the locking screw at the bottom (tightening torque 0.3–0.4 N·m).
Maintenance
- Keep the sensor optics, camera, and IR illuminator clean – wipe off dust and fingerprints with a dry, soft cloth. Do not use aggressive cleaning agents.
- Check that the field of view is not blocked by new furniture, decorations, or other obstacles.
- Regularly check the battery status and signal strength in the ProSAFE app.
- Perform a detection test and an image test again after every manipulation of the detector.
- Do not disassemble the detector and protect it from corrosive and staining liquids.
Technical Specifications
| Detection parameters | |
| Detection type | Motion – PIR |
| Sensor | Dual-element low-noise PIR sensor |
| Detection range | 12 m, 90° (at an installation height of 2.2 m) |
| Speed of the detected object | 0.3–3 m/s |
| PET immunity | Ignores animals up to a weight of 18 kg and a height of 50 cm |
| Resistance to white light | 2000 lx |
| Sensitivity | Adjustable in 3 levels |
| Temperature compensation | Bidirectional digital |
| Temperature sensor | |
| Measuring range | −15 °C to +65 °C (indoors) |
| Accuracy / resolution | ±1 °C / 1 °C |
| Video and photo verification | |
| Camera field of view | 88° (H), 68° (V) |
| Image type | JPEG |
| Resolution | 1600×1200; 1280×960; 640×480; 320×240 |
| Frame rate | 2 |
| Number of images in the sequence | 1–20 (1–10 at 1600×1200 resolution) |
| Interval between images | 10 / 30 / 60 / 120 s |
| Illuminator | Infrared, range up to 12 m |
| Day / night mode | Automatic; color (day) / black-and-white (night) |
| Wireless transmission – SAFE Keeper | |
| Carrier frequency | 868.0–868.6 MHz |
| Transmitter power (EIRP) | limit 25 mW |
| Communication distance | RF: up to 1,600 m; RF-HD (image transmission): up to 300 m in open space |
| Communication type | Two-way |
| Encryption | AES128 |
| Frequency hopping | Yes (anti-jamming protection) |
| Interface and functions | |
| Indication | 1× green LED |
| Control Devices | Power switch |
| Tamper contact | Yes (body contact, optionally bracket contact) |
| Remote update | Yes (cloud) |
| Low battery notification | Yes |
| Test mode | Signal strength test, RF-HD test, detection test, image test |
| General | |
| Power supply | 3× CR123A batteries (included) |
| Current draw | Standby 65 µA; alarm day 170 mA (avg.) / 800 mA (max.), night 230 mA (avg.) / 2.8 A (max.) |
| Battery life | Up to 4 years (at 2 alarms per week, 70% efficiency) |
| Operating temperature | −10 °C to +55 °C (indoors) |
| Operating humidity | 10–90 % RH |
| Housing material | PC + ABS, white |
| Dimensions | 71.0 × 53.2 × 127.6 mm (L × W × H) |
| Weight | 202 g (net) / 333 g (gross) |
| Installation | Wall, corner; recommended height 2–2.4 m |
| Compatibility | Hub 2 Plus LTE (SAFE 38300), hub firmware v1.001.R.220625 or later |
| Certification | CE; EN 50131-1:2006+A1:2009+A2:2017+A3:2020; EN 50131-5-3:2017; EN 50131-6:2017; EN 50130-4:2011+A1:2014; Security grade 2; Environmental class II |
Package Contents
- Motion Cam detector – 1 pcs
- Double-sided adhesive tape – 1 pcs
- Mounting kit (screws) – 2 sets
- CR123A batteries – 3 pcs
- QR code with the user manual – 1 pcs
- Quick user guide – 1 pcs
- Legal and regulatory information – 1 pcs
Safety Notices
- The device is intended for indoor use only – operate and store it only within the permitted temperature and humidity range.
- Protect the device from liquids, direct sunlight, and heat sources.
- Do not disassemble or modify the device – contact technical support in case of a fault.
- Keep batteries out of reach of children. Do not throw batteries into fire, do not crush or cut them – risk of explosion. If battery ingestion is suspected, seek medical help immediately.
- Replace depleted batteries only with batteries of the same type and model (CR123A).
- Do not dispose of the product with regular household waste – hand it in for recycling through the electrical equipment take-back system.
Warranty
The SAFE Motion Cam device is covered by a warranty 36 months from the date of sale. The warranty does not cover batteries or defects caused by failure to follow the instructions in this manual.
If you experience any problems with the device, contact technical support first – most situations can be resolved remotely.
Gallery
Need Help?
SAFE HOME europe technical support:
Email: info@safe-home.eu · Phone: (+420) 581 222 262
Website: www.smart-safe.eu