Product Manuals / Outdoor security

Wireless outdoor PIR motion detector with photo verification compatible with the ProSAFE app
SAFE Motion Cam Outdoor (SAFE 38470)

User Manual

Updated 20. 8. 2026

Product Page Datalist (PDF)
The SAFE Motion Cam Outdoor detector

Motion Cam Outdoor is an outdoor wireless dual PIR motion detector with a microwave sensor and an integrated camera that captures a sequence of images upon alarm or on request, for immediate photo verification of the event. The device reliably detects motion up to a distance of 15 meters and ignores animal movement up to a weight of 40 kg and a height of 80 cm in height. It communicates with the SAFE system using an encrypted protocol SAFE Keeper at a distance of up to 1 600 m in open space.

15 mdetection range
1,3 Mpxcamera resolution
3,5 yearsbattery life
40 kgPET immunity
1 600 mradio signal range
IP65ingress protection rating
Ignores animal movement up to 40 kg in weight and 80 cm in height
Motion detection range up to 15 m
Radio signal range up to 1600 m
Cloud-based device firmware update
Horizontal field of view of the PIR up to 90° and of the camera 110°
Integrated camera with a resolution of 1280 x 960 px
Up to 20 photos after a motion alarm
I R SSmart IR illuminator with automatic adjustment
Dual PIR sensor for motion detection
Microwave motion detection sensor
Adjustable detection sensitivity in 3 levels
Integrated temperature sensor
Infrared illuminator for capturing images at night
Detection of PIR sensor lens covering (Antimasking)
Captures a sequence of images upon motion detection or on demand
Security grade 2 according to ČSN EN 50131
Up to 4 years of battery operation
Tamper protection against sabotage and unauthorized manipulation of the device
Adding the device to the system by scanning a QR code
Two-way information transfer between devices
Data encryption using the AES algorithm with rolling code
Protection against radio signal interference
IP 66 IP66 protection rating, suitable for installation in demanding outdoor environments

Preface

General

This user manual describes the installation, features, and operation of the wireless outdoor PIR motion detector with photo verification (hereinafter referred to as the "detector"). Before using the device, read this manual carefully and keep it for future reference.

Safety Instructions

The following signal words may appear in the user manual:

Signal WordMeaning
DANGERIndicates a high potential hazard that, if not avoided, may result in death or serious injury.
WARNINGIndicates a medium or low potential hazard that could cause minor or moderate injury if not avoided.
CAUTIONIndicates a potential risk that could lead to property damage, data loss, reduced performance, or an unpredictable outcome.
TIPProvides methods to help you solve a problem or save time.
NOTEProvides additional information, such as emphasis and supplementary text.

Revision History

VersionRevision ContentRelease Date
V1.0.0First release.August 2026

Privacy Notice

As a device user or data controller, you may collect personal data of others, such as their face, fingerprints, and license plate number. You must comply with local privacy laws and regulations to protect the legitimate rights and interests of other people by implementing measures that include, among others: providing clear and visible identification to inform people of the existence of the monitored area and providing the required contact information.

About the Manual

Important Safeguards and Warnings

This section contains information on the proper handling of the product, risk prevention, and prevention of property damage. Read it carefully before using the device and follow the instructions provided when using it.

Operating Requirements

CAUTION

Installation Requirements

WARNING
CAUTION

Functional Elements

Functional elements of the Motion Cam Outdoor detector – numbered diagram
Functional elements of the Motion Cam Outdoor detector
  1. Photosensitive sensor – measures ambient brightness and light intensity.
  2. Camera – captures images when an alarm is triggered or on demand.
  3. IR illuminator – infrared illumination for capturing images in dark environments.
  4. LED indicator (green) – indicates pairing, alarm, and test results (see Signaling).
  5. Swivel bracket hole – for installing the swivel bracket.
  6. Pole mount bracket hole – for installing the pole or pipe mount bracket.
  7. Wall mounting hole – for the wall bracket.
  8. Corner mounting hole – for the corner bracket.
  9. Tamper (tamper contact) – triggers an alarm when the detector is removed from the mounting plate.
  10. Battery compartment – 4× CR123A batteries.
  11. Detection range setting switch – adjusts the actual detection range to installation conditions (NEAR/FAR).
  12. Power switch (ON/OFF) – turns the device on and off.

Operating Principle

Motion Cam Outdoor detects a moving intruder in the protected area by combining two independent technologies – a dual PIR sensor and a microwave sensor. An alarm is triggered only when the motion is confirmed by both technologies simultaneously. This allows the detector to reliably distinguish actual human movement from vegetation movement, temperature changes, or lighting changes, even in demanding outdoor environments. When an alarm is triggered, the detector immediately captures verification images and sends the event and images to the hub – the user receives a notification and photos in the app ProSAFE.

Protection against false alarms

An intelligent digital algorithm continuously evaluates signals from both sensors as well as the photosensitive sensor. The detector is resistant to white light up to 10 000 lx – not even headlights from passing cars or sunlight reflections will trigger a false alarm.

PET immunity

The detector ignores the movement of animals up to a height of 80 cm and a weight of 40 kg. This means your pets can move around the garden freely without triggering an alarm.

Temperature compensation

Bidirectional digital temperature compensation maintains stable detection sensitivity across the entire operating temperature range, from −25 °C to +60 °C. In addition, the built-in temperature sensor measures the ambient temperature with an accuracy of ±1 °C and allows you to set an unusual temperature alarm.

Antimasking

The antimasking function protects the detector's PIR sensors against tampering – if the optics are covered, taped over, or shaded, the detector sends a notification to the ProSAFE app.

Antimasking can be set to the modes active when Armed, always on, or turned off. The masking alarm can be supplemented with siren linkage.

Alarm photo verification

Motion Cam Outdoor is equipped with an integrated 1,3-megapixel HD camera with a horizontal field of view 110° and vertical 60°. When a motion alarm is triggered, or on request from the ProSAFE app, the detector captures a sequence of images in JPEG format at a resolution of up to 1280 × 960 px and sends them to the app, or to the monitoring center (DPPC). The images allow immediate verification of the actual cause of the alarm without the need to install a separate camera.

The camera module includes a smart infrared illuminator with automatic adjustment and a range of up to 15 m – allowing the detector to capture quality images even in complete darkness. It automatically switches between color (day) and black-and-white (night) mode depending on the ambient light intensity.

Image capture settings

The photo verification parameters can be adjusted in the detector settings (function Image settings):

SAFE Keeper protocol and RF-HD transmission

Communication with the hub is provided by the encrypted two-way radio protocol SAFE Keeper in the 868 MHz band:

The photo verification images themselves are transmitted via a separate high-speed channel RF-HD (2,4 GHz) intended for fast transmission of larger volumes of data – its range is up to 1 400 m in open space. Before installation, therefore, in addition to the normal signal strength, we also recommend verifying the RF-HD test (see chapter Functionality Test).

Adding to the System

Adding a device by scanning a QR code
Adding a device by scanning a QR code

Before adding the device

  1. Install the app ProSAFE and log in to your account.
  2. Make sure you have a compatible hub added in the app (Hub 2 Plus LTE, SAFE 38300) with a stable internet connection.
  3. The hub must be in the Disarmed state.
App version 1.99.620 or later and hub firmware 2.000.0000000.0.R.20231220 or later are required.

How to add Motion Cam Outdoor

  1. In the ProSAFE app, open your hub and click Device.
  2. Click + Add device.
  3. Scan the QR code with the serial number on the bottom of the detector and click Next.
  4. Once the detector is found, click Next.
  5. Following the on-screen instructions, turn on the detector by switching the power switch to position ON and click Next.
  6. Wait for pairing to complete – successful pairing is confirmed by the LED lighting up for 2 seconds.
  7. Enter the detector name, select the area (zone), and click Done.
After successful binding, the detector also automatically performs a camera self-test – its successful completion is confirmed by the LED with the same signaling (2 s illumination).
If pairing fails (the LED blinks slowly for 3 s), check that the hub is online and in the Disarmed state, and repeat the procedure.

States

You can view the current detector status in the ProSAFE app by selecting the detector in the Devices list.

ParameterMeaning
Online statusConnection between the detector and the hub
  • Online – the detector is communicating
  • Offline – loss of connection
Image testClick to capture images on request; they will appear in the message list
Signal strengthRadio signal level: none / low / weak / good / excellent
Battery levelFull / sufficient / medium / insufficient / low
Tamper statusIndicates that the detector has been removed from the mounting plate or that the cover has been opened
TemperatureCurrent ambient temperature measured by the integrated sensor
SensitivitySet motion detection sensitivity level
Temporarily disableDetector functional status
  • Enable – the detector is fully functional
  • Disable tamper alarm only
  • Disable – the detector does not send any messages to the hub
24-hour zoneEnabled / disabled – detection independent of the system's arming status
Entry / exit delayThe configured delay times for entry and exit
Transmission via repeaterWhether the detector communicates with the hub via a signal repeater
Firmware versionCurrent detector firmware version
Camera firmware versionCurrent firmware version of the camera module

Settings

You can change the settings in the ProSAFE app: select the detector in the Devices list and click the edit icon.

SettingsValue
Device nameCustom detector name; shown in the device list and in notifications
Area (zone)Assigning the detector to a system area
Temporarily disableAllow (default) / Disable tamper alarm only / Disable
Image settingsPhoto verification parameters
  • Image transfer speed – fast / normal
  • Image resolution – 1280×960 to 160×120 px
  • Number of images in the sequence
  • Capture interval
SensitivityLow / medium / high – choose based on the detection test results
Microwave sensorEnabling microwave detection and setting its range
AntimaskingActive when Armed / always on / off; optional siren linkage
Motion alarmEnabling the motion alarm and siren linkage
  • Enabling this shortens battery life – recommended especially for pole mounting
Number of alarmsNumber of alarms triggered during a single system activation (default: 3)
LED indicatorOn (default) / off – when off, the LED does not light up regardless of the device's status
24-hour zoneEnabled – the detector monitors even when the system is disarmed
Home Armed modePartial activation of selected devices; optionally with a delay
DelayEntry delay max. 45 s (according to EN 50131-1), exit 0–120 s
Siren linkageThe siren sounds when this detector triggers an alarm
Unusual temperature alarmAlarm when the set temperature range (min/max) is exceeded
Transmission powerHigh / low / automatic – higher power extends the range and increases consumption
Signal strength testVerification of radio link quality (SAFE Keeper) at the installation location
RF-HD TestVerification of the signal strength of the dedicated image transmission channel; at least 2 bars recommended
Detection testVerification of the detector's detection zone
Cloud updateRemote firmware update
Remove deviceDeleting the detector from the system (swipe left in the Devices list)

Signaling

LED indicationEvent
Fast green blinkingPairing mode, or reduced-sensitivity mode (low transmission power)
Lights up green for 2 sSuccessful binding with the hub, or a successful camera self-test
Slow green blinking for 3 sBinding failed, or the camera self-test failed
Continuously lit greenAn alarm has been triggered
OffThe LED indicator is turned off in the settings, or the device is switched off

Choosing the installation location

Position the detector so that its field of view covers the intruder's expected path (ideally perpendicular to the direction of movement) and no obstacles block the view. The recommended installation height is 0,8–1,3 m; the stated range of 15 m and a PIR sensor viewing angle of 90° apply to an installation height of 1 m.

Signal strength

Before final installation, test the signal strength in the app (Signal strength test) as well as the strength of the dedicated image transmission channel (RF-HD Test). The recommended minimum value is 2 bars for both tests. If the signal is weak, relocate the detector or use a signal repeater.

Detection zone

The actual detection range may vary depending on temperature and ambient lighting. The range can be adjusted using the detection range setting switch (NEAR/FAR) on the device and by setting the microwave sensor range in the app. After installation, always perform detection test and walk through the protected area – this verifies actual coverage.

Detection characteristics – top view (90°) and side view for individual range switch positions
Detection zone: top view (90°, range 15 m) and side profiles for individual range switch positions
Detection examples: small animal not detected, adult detected, car not detected
The detector detects a moving person; it ignores small animals and passing cars
The detector reliably detects a moving person at a speed of 0,3–2 m/s. It does not respond to animals up to 80 cm in height and 40 kg, nor to passing cars.

Camera field of view

The camera has its own field of view, different from the PIR sensor – horizontally 110°, vertically 60°. The infrared illuminator ensures quality images up to a distance of 15 m even in the dark. During installation, therefore, verify with a test image (Image testthat the camera covers the desired area.

Where not to install the detector

  1. In locations exposed to direct sunlight or its reflections (e.g., facing a water surface or reflective surfaces).
  2. Near heat sources – outdoor air conditioning units, ventilation, heaters.
  3. In locations where obstacles (vegetation, poles, decorations) obstruct the field of view.
  4. In locations with a weak hub radio signal.
Unsuitable locations: facing sunlight reflection from a water surface and facing heat sources
Do not install the detector facing reflective surfaces or heat sources

Detector installation

The detector can be mounted on a wall, in a corner, or on a pole. Before drilling, we recommend temporarily attaching the detector at the installation location and performing a signal strength test, an RF-HD test, and a detection test.

Wall Mounting

  1. Using the holes on the back of the detector, drill 4 holes into the wall and insert the wall plugs (included).
  2. Attach the mounting panel to the wall with screws.
  3. Place the detector body onto the mounting plate by sliding it in the direction of the arrow.
  4. Tighten the locking screw at the bottom of the device (max. torque 0,5 N·m).
Mounting the mounting panel on the wall
Mounting the mounting panel on the wall

Corner mounting

  1. Drill 4 holes according to the spacing of the corner mounting holes and insert the wall plugs.
  2. Attach the mounting panel in the corner.
  3. Attach the detector to the panel and tighten the locking screw (max. 0,5 N·m).
Mounting the mounting panel in a corner
Corner mounting

Pole mounting

  1. Attach the bracket to the pole or pipe and verify that it is securely fastened.
  2. Attach the detector body to the mounting panel and tighten the locking screw (max. 0,5 N·m).
Mounting the pole bracket
Pole mounting
Attaching the detector to the mounting panel and tightening the locking screw to a torque of max. 0,5 N·m
Attaching the detector to the mounting panel and tightening the locking screw (max. 0,5 N·m)
For pole mounting, we recommend enabling motion alarm in the detector settings – this increases protection against tampering with the pole.

Functionality Test

After installation, verify the correct function of the detector:

  1. Signal strength test – run a test in the app and verify that the signal reaches at least 2 bars.
  2. RF-HD Test – verify that the signal of the dedicated image transmission channel reaches at least 2 bars.
  3. Detection test – start the test and walk through the protected area; verify that the detector registered motion throughout the entire required zone.
  4. Image test – take a test image and verify in the message list that the camera covers the desired area and that the image has sufficient quality.
  5. Antimasking test – cover the detector with an opaque object (cloth, bag) and verify that a masking notification was received in the app.
Antimasking test – covering the detector and the Masking notification in the app
Antimasking test: after covering the detector, a notification is received in the app
The detection test activates within the detector's communication interval with the hub (default 60 s) – wait a while after starting the test.

Battery replacement

The detector is powered by 4× CR123A lithium batteries (3 H) with a lifespan of up to 3,5 years (at 2 alarms per week – the camera and IR illuminator increase consumption compared to a detector without a camera). The ProSAFE app will notify you of a low battery.

Inserting the CR123A batteries and switching the switch to the ON position
Inserting the batteries (mind the polarity) and turning on the device
  1. Loosen the locking screw at the bottom and remove the detector body from the mounting panel by sliding it in the direction of the arrow.
  2. Loosen the battery compartment cover screws and open the cover.
  3. Remove the old batteries and insert 4 new CR123A batteries. Observe the correct polarity – the "+" symbols on the batteries must match the symbols inside the detector.
  4. Close the battery compartment cover and tighten the screws.
  5. Turn on the device using the switch, setting it to position ON.
  6. Attach the detector back onto the mounting panel and tighten the locking screw (max. 0,5 N·m).
Always replace all 4 batteries at the same time and use only batteries of the same type (CR123A). Do not throw used batteries into fire and keep them out of reach of children – risk of explosion or serious injury if swallowed.

Maintenance

Technical Specifications

Detection parameters
Detection typeMotion – dual PIR + microwave sensor
SensorDual-element low-noise PIR sensor + microwave sensor
Microwave frequency24 GHz
Detection range15 m, 90° (at an installation height of 1 m)
Speed of the detected object0,3–2 m/s
PET immunityIgnores animals up to 80 cm in height and 40 kg in weight
Resistance to white light10 000 lx
SensitivityAdjustable in 3 levels
Temperature compensationBidirectional digital
AntimaskingYes
Video
CameraIntegrated HD camera, 1,3 Mpx
Field of view110° (H), 60° (V)
Image typeJPEG
Resolution1280 × 960; 640 × 480; 320 × 240; 160 × 120
Frame rate2 fps
IlluminatorInfrared; range up to 15 m
Day/night modeAutomatic; color (day) / black-and-white (night)
Temperature sensor
Measuring range−25 °C to +65 °C
Accuracy / resolution±1 °C / 1 °C
Wireless transmission – SAFE Keeper
Carrier frequency868.0–868.6 MHz
Transmitter power (EIRP)limit 25 mW
RF communication distanceUp to 1,600 m in open space
RF-HD communication distanceUp to 1 400 m in open space (dedicated image transmission channel)
Communication typeTwo-way
EncryptionAES-128 with rolling code
Frequency hoppingYes (anti-jamming protection)
Interface and functions
Indication1× green LED
Control DevicesPower switch; detection range setting switch
TamperYes (tamper contact)
Remote updateYes (cloud)
Low battery notificationYes
Test modeSignal strength test, RF-HD test, detection test, image test
General
Power supply4× CR123A batteries, 3 V (included)
Current drawStandby 20 µA; night alarm (with camera and IR illuminator) 380 mA (avg.), 1,5 A (max.)
Battery lifeUp to 3,5 years (at 2 alarms per week)
Operating temperature−25 °C to +60 °C
Operating humidity10–90 % RH
Ingress protection ratingIP65
Housing materialPC + fiberglass, white
Dimensions263 × 106 × 94 mm
Weight763 g (net), 1 060 g (gross)
InstallationOn wall, in corner, on pole; recommended height 0.8–1.3 m
CompatibilityHub 2 Plus LTE (SAFE 38300)
CertificationCE; EN 50131-1; EN 50131-2-4; EN 50131-5-3; EN 50131-6; Security grade 2; Environmental class IV
Dimensional drawing of the detector with camera: 263 × 106 × 94 mm
Dimensions of the detector with camera (mm)

Package Contents

Motion Cam Outdoor detector package contents
  1. Motion Cam Outdoor detector – 1 pcs
  2. CR123A batteries – 4 pcs
  3. Mounting kit (4× screw, 4× wall plug) – 1 set
  4. QR code with serial number – 1 pcs
  5. Quick user guide – 1 pcs
  6. Legal and regulatory information – 1 pcs

Safety Notices

Warranty

The SAFE Motion Cam Outdoor device is covered by a warranty 36 months from the date of sale. The warranty does not cover batteries or defects caused by failure to follow the instructions in this manual.

If you experience any problems with the device, contact technical support first – most situations can be resolved remotely.

Gallery

Need Help?

SAFE HOME europe technical support:
Email: info@safe-home.eu  ·  Phone: (+420) 581 222 262
Website: www.smart-safe.eu