SAFE Chime is a compact indoor unit designed as an additional accessory for the Wi-Fi SAFE DoorBell. When the button on the outdoor unit is pressed, the SAFE Chime speaker plays the selected melody, so you know about a visitor without constantly watching your phone. Simply plug the device into a standard 230 V outlet and pair it via the mobile app ProSAFE, where you can choose a melody to your liking and adjust the volume.
Preface
General
This user manual describes the installation, features, and operation of the wireless chime for the SAFE DoorBell video doorbell (hereinafter referred to as the "chime"). Before using the device, read this manual carefully and keep it for future reference.
Safety Instructions
The following signal words may appear in the user manual:
| Signal Word | Meaning |
|---|---|
| DANGER | Indicates a high potential hazard that, if not avoided, may result in death or serious injury. |
| WARNING | Indicates a medium or low potential hazard that could cause minor or moderate injury if not avoided. |
| CAUTION | Indicates a potential risk that could lead to property damage, data loss, reduced performance, or an unpredictable outcome. |
| TIP | Provides methods to help you solve a problem or save time. |
| NOTE | Provides additional information, such as emphasis and supplementary text. |
Revision History
| Version | Revision Content | Release Date |
|---|---|---|
| V1.0.0 | First release. | August 2026 |
Privacy Notice
As a device user or data controller, you may collect personal data of others, such as their face, fingerprints, and license plate number. You must comply with local privacy laws and regulations to protect the legitimate rights and interests of other people by implementing measures that include, among others: providing clear and visible identification to inform people of the existence of the monitored area and providing the required contact information.
About the Manual
- The user manual serves as a reference guide only. There may be minor differences between the information provided and the product.
- We are not liable for any damage resulting from using the product in a manner that does not comply with the instructions in the user manual.
- The manual will be updated according to the latest laws and regulations of the relevant jurisdictions. For detailed information, refer to the printed user manual, scan the QR code, or visit our official website. The manual is for reference purposes only. There may be minor differences between the electronic and paper versions.
- All designs and software are subject to change without prior written notice. Due to product updates, certain differences may occur between the product and the information in the manual. Customer service will provide you with the latest version of the software and supplementary documentation.
- There may be printing errors or discrepancies in the description of functions, operations, and technical data. In the event of doubt or dispute, we reserve the right of final explanation. If the manual (in PDF format) cannot be opened, update your reader software or try a different common reader software.
- All trademarks, registered trademarks, and company names in the manual are the property of their respective owners.
- If you encounter any problems while using the device, visit our website or contact your supplier or customer service.
- In the event of ambiguity or dispute, we reserve the right of final explanation.
Important Safeguards and Warnings
This section contains information on the proper handling of the product, risk prevention, and prevention of property damage. Read it carefully before using the device and follow the instructions provided when using it.
Operating Requirements
- Before use, make sure the device's power supply is working properly.
- Do not unplug the device's power cable while it is switched on.
- Use the device only within its rated power range.
- Transport, use, and store the device within the permitted humidity and temperature conditions.
- Prevent liquids from splashing or dripping onto the device. Make sure there are no liquid-filled objects on the device, to prevent liquid from entering it.
- Do not disassemble the device.
Installation Requirements
- Before switching on, connect the device to the power adapter.
- Strictly comply with local electrical safety standards and make sure the voltage in the area is stable and matches the device's power requirements.
- Do not connect the device to more than one power source. Otherwise, the device could be damaged.
- When working at heights, follow all safety procedures and use the required protective equipment.
- Do not expose the device to direct sunlight or heat sources.
- Do not install the device in damp, dusty, or smoky locations.
- Install the device in a well-ventilated location and do not block its ventilation.
- Use the power adapter or power supply provided by the device manufacturer.
- The power supply must meet the ES1 requirements of IEC 62368-1 and must not exceed PS2. The power supply requirements are governed by the device's rating label.
- Connect Class I electrical appliances to a socket with protective earthing.
Functional Elements
- Speaker – plays the selected melody when the SAFE DoorBell video doorbell is rung.
- LED indicator – indicates the device status and network connection progress (see Signaling).
- RESET button – used to restore factory settings (press and hold for 5 seconds).
- Plug release latch – allows the chime to be safely detached from the included adapter.
- Adapter pins (live, neutral) – used to connect to a 230 V mains outlet.
Operating Principle
SAFE Chime functions as an additional acoustic notification for the video doorbell SAFE DoorBell. As soon as a visitor presses the button on the outdoor unit, SAFE Chime plays the selected melody at the same time as the notification appears in the ProSAFE app – so you don't have to constantly check your phone to know someone is ringing.
Melody and volume
In the ProSAFE app, you can choose a ringtone to your liking from a selection of several melodies and adjust the playback volume – quiet for evening hours, louder for daytime.
Wi-Fi 6 and cloud updates
The device connects directly to the home Wi-Fi 6 network (IEEE 802.11b/g/n/ax, 2,4 GHz band). Thanks to the internet connection, the chime's firmware can be updated remotely, without the need for manual intervention.
Linking multiple units
Multiple SAFE Chime units can be paired with a single SAFE DoorBell video doorbell at the same time – place them in different rooms so that everyone in the household reliably knows about a visitor.
Adding to the System
Before adding the device
- Install the app ProSAFE and log in to your account.
- Make sure you have added a hub with a stable internet connection in the app.
- Plug SAFE Chime into a 230 V outlet and wait for it to start up (the LED briefly lights up red).
- Make sure your phone is connected to the home Wi-Fi network and has Bluetooth turned on.
How to add SAFE Chime to the system
- In the ProSAFE app, click Add device.
- Scan the QR code with the serial number on the chime's label and click Next.
- Wait for confirmation of the Bluetooth connection.
- Enter the home Wi-Fi network password and click Next.
- Enter the device name and click Done.
- Check the Wi-Fi signal strength at the installation location.
Binding with the SAFE DoorBell video doorbell chime
For SAFE Chime to play a melody when the video doorbell is rung, it needs to be assigned to the SAFE DoorBell video doorbell:
- In the ProSAFE app, open the device settings for SAFE DoorBell and click Chime connection.
- On the SAFE Chime, press and hold the previous ringtone button until you hear a beep and the indicator light stays on continuously.
- In the app, click Connect chime and wait until the indicator light on the SAFE Chime stops flashing and turns off – the video doorbell and chime are now successfully bound.
- Verify the binding by clicking Ring – if SAFE Chime actually rings after the video doorbell button is pressed, the binding was successful.
States
You can view the current status of the chime in the ProSAFE app by selecting SAFE Chime in the device list.
| Parameter | Meaning |
|---|---|
| Online status | Chime connection to the home Wi-Fi network
|
| Wi-Fi signal strength | Home network signal level at the installation location |
| Bound video doorbell | Name of the SAFE DoorBell video doorbell to which SAFE Chime is assigned |
| Firmware version | Current firmware version of the chime |
Settings
You can adjust the settings in the ProSAFE app: select SAFE Chime in the device list and click the edit icon.
| Settings | Value |
|---|---|
| Device name | Custom name for the chime; displayed in the device list and in notifications |
| Melody | Selection of the ringtone melody from a choice of several melodies |
| Volume | Volume setting for the played melody – quiet for evening, louder during the day |
| Chime connection | Binding / disconnecting from the SAFE DoorBell video doorbell |
| Ringing | Test playback of the melody to verify binding |
| Cloud update | Remote firmware update |
| Remove device | Deleting the chime from the system (swipe left in the device list) |
Signaling
| LED indication | Event |
|---|---|
| Continuously lit green | The device is working correctly |
| Blinking Green Quickly | Wi-Fi network configuration in progress |
| Slowly flashing green | Preparing Wi-Fi network configuration |
| Continuously lit red | Device starting up / restarting |
| Slowly flashing red | Wi-Fi connection failed |
| Flashing alternately red and green | Firmware update in progress |
| Off | The device is off, or a factory reset is in progress |
Choosing the installation location
SAFE Chime is intended exclusively for indoor installation (IP20 protection rating) – place it in a dry indoor location, out of reach of moisture, water, and direct heat sources.
- Choose a 230 V outlet in a location with good coverage of the home Wi-Fi network – the further from the router, the weaker the signal.
- Do not use outlets behind furniture, metal cabinets, or other obstacles that could shield the Wi-Fi signal.
- Keep the outlet easily accessible so that the device can be quickly disconnected from power at any time.
- If you want ringing coverage in multiple rooms, install and pair multiple SAFE Chime units with the SAFE DoorBell video doorbell.
Installation
- Attach the included adapter to the SAFE Chime body.
- Plug the device into a 230 V outlet or into an extension cord.
- Wait for the device to start up – the LED indicator briefly lights up red.
- Complete adding it to the system and binding with the SAFE DoorBell video doorbell (see Adding to the System).
Functionality Test
After installation and binding, verify the correct function of the chime:
- Wi-Fi signal strength test – verify in the app that the chime has a stable connection to the home network.
- Ringing – in the binding settings, click the Ring button and verify that SAFE Chime plays the selected melody at the selected volume.
- Outdoor unit test – press the button on the SAFE DoorBell video doorbell and verify that SAFE Chime rings at the same time as the notification appears in the app.
Maintenance
- Keep the chime clean and dry – wipe it only with a dry soft cloth.
- Do not use aggressive cleaning agents and do not immerse the chime in water or any other liquid.
- Regularly check the Wi-Fi signal strength and pairing status in the ProSAFE app.
- Protect the plug and adapter from damage – if visible damage occurs, stop using the device and contact support.
Technical Specifications
| Interface | |
| Speaker | Built-in |
| Indication | 1× LED indicator |
| Control Devices | 1× RESET button |
| Network / communication | |
| Wi-Fi | IEEE 802.11b/g/n/ax (Wi-Fi 6), 2,4000–2,4835 GHz, EIRP ≤ 20 dBm |
| Firmware update | Yes, remotely via the network |
| General | |
| Power supply | 100–240 V AC, 50/60 Hz (adapter included) |
| Power consumption | < 5 W |
| Operating temperature | −10 °C to +45 °C |
| Operating humidity | 20–95 % RH, non-condensing |
| Product dimensions | 96 × 50 × 30,3 mm |
| Package dimensions | 187 × 81 × 57 mm |
| Installation method | Outlet / extension cord |
| Housing material | Plastic and fabric |
| Ingress protection rating | IP20 |
| Color | White – gray |
| Weight (net) | 0,1 kg |
| Weight (gross) | 0,2 kg |
| Compatibility | SAFE DoorBell video doorbell; ProSAFE app v1.99.00 or later |
| EAN | 0728204235362 |
| Certification | CE; CE-LVD: EN62368-1; CE-EMC: 2014/30/EU; CE-RED: 2014/53/EU |
Package Contents
- SAFE Chime chime – 1 pcs
- Power adapter – 1 pcs
- Quick user guide – 1 pcs
Safety Notices
- The device is intended exclusively for indoor use (IP20) – protect it from moisture, rain, and other liquids.
- Use only the included power adapter and connect the device only to a power source of 100–240 V AC, 50/60 Hz.
- The outlet into which the device is plugged must remain easily accessible for quick disconnection from power.
- Do not install the device near heat sources or in places exposed to direct sunlight.
- Operate and store the device only within the permitted temperature and humidity range.
- Do not dispose of the product with regular household waste – hand it in for recycling through the electrical equipment take-back system.
Warranty
The SAFE Chime device is covered by a warranty of 36 months from the date of sale. The warranty does not cover defects caused by failure to follow the instructions provided in this manual.
If you experience any problems with the device, contact technical support first – most situations can be resolved remotely.
Gallery
Need Help?
SAFE HOME europe technical support:
Email: info@safe-home.eu · Phone: (+420) 581 222 262
Website: www.smart-safe.eu