Hub 2 Plus LTE – DC represents a multifunctional solution that enables the establishment of a fully-fledged, professional wireless security for the protection of mobile and floating objects such as ships, yachts, caravans, mobile homes, containers, cargo or transport vehicles and other means where a conventional electrical connection is either completely absent, low-voltage infrastructure is utilized, or stable power supply cannot be ensured.
Wherever it was previously impossible to ensure stable power supply for a professional security system, you now obtain full-fledged protection – independent of the power grid and ready to provide protection wherever you need it.

In addition to the standard RJ-45 network port for Ethernet connection, the Hub 2 Plus LTE – DC offers three additional communication channels. Wi-Fi and two SIM card slots with LTE support ensure stable connectivity even in remote locations or when communicating with moving objects. Both GSM modules of the Hub fully support 2G, 3G, 4G and LTE networks and thus effectively solve any potential signal availability limitations. Each of the two SIM cards can operate on a GSM network of a different mobile operator, and if one network fails, it automatically switches to the other within just a few seconds.

Hub 2 Plus LTE – DC supports connection of up to 150 detectors and SAFE category devices (system capacity limit for 6 sirens, 64 PIR with Motion Cam camera of which 8 indoor, 64 remote controls, 8 keypads and 4 signal repeaters), which can be divided into up to 32 independent groups (subsystems). The system can also easily integrate an almost unlimited number of IP cameras, recording devices and other elements of the SAFE ecosystem.
System management includes 65 users (31x standard user, 1x administrator, 1x integrator/service and 32x keypad user).

SAFE Keeper is a radio protocol developed for the SAFE wireless security system. It operates at an operating frequency of 868.0-868.6 MHz and provides long range communication between system devices up to 2000 m in an open area without interference. It is protected by AES128 encryption and a bi-directional communication mechanism, thus providing a high level of security for the transmitted data. In the event of interference to the radio signal, it alerts the user to this fact and automatically switches to an uninterrupted frequency band. The device is reliably protected against viruses at the software level.

In the event of an intrusion, the Hub 2 Plus LTE can work with Motion Cam motion detectors (available for indoor and outdoor use), which have a photo alarm verification function, and instantly sends images from the detectors to the ProSAFE app or alarm receiving centers. This means that there is no need to constantly monitor security cameras and 100% privacy is guaranteed when indoor areas are secured.

For the parallel visual transmission of data from Motion Cam motion detectors equipped with an integrated camera, Hub 2 Plus LTE combines Wi-Fi and Ethernet technology with the SafeKeeper radio protocol.

ProSAFE delivers an intuitive and completely free mobile app that allows you to easily and efficiently manage all devices in the ProSAFE security ecosystem. Whether it's video phones, intercoms, IP cameras, recording devices, detectors or automation elements, you have everything under control in one place. The app is designed for smart devices with Android and iOS operating systems and is fully localized in Czech (Slovak, Polish, English, German and Hungarian), which ensures maximum convenience for its user. Thanks to a clear interface and simple intuitive controls, managing your security system is a matter of a few clicks.

We have designed the ProSAFe security system so that not only the mobile application is updated, but also the firmware of the sub-devices including the central control unit. Thus, the ProSAFE security system is constantly adapting to modern trends, updating, optimizing and expanding with new system functionalities depending on the development of technology, requirements or needs of our users. The entire process is carried out via encrypted communication, which ensures maximum data protection and integrity. Updates can be made fully automatically or based on user confirmation.

In case of intrusion, Hub 2 Plus LTE – DC can cooperate with Motion Cam motion detectors (available for both indoor and outdoor use), which feature an alarm photo verification function, and immediately sends images from the detectors to the ProSAFE App or to alarm receiving centers. This means there is no need to constantly monitor security cameras, and in the event of securing indoor spaces, 100% privacy protection is guaranteed.
For parallel visual data transmission from Motion Cam motion detectors equipped with an integrated camera, Hub 2 Plus LTE combines Wi-Fi and Ethernet technologies in combination with the SafeKeeper radio protocol.

In the ProSAFE security system application, you can remotely create intelligent scenarios that automatically respond to alarms, motion, or other defined events without any intervention on your part – even in facilities without permanent supervision.
Hub 2 Plus LTE – DC offers the possibility of up to 64 independent automation scenarios.
A practical example is presence simulation. Based on a preset time schedule, lights are regularly turned on, making the facility appear occupied even during your prolonged absence. Another example is automatic lighting of protected spaces – when motion is detected, outdoor lighting is immediately activated, which deters a potential intruder from proceeding further and simultaneously alerts the surroundings to their presence.

Hub 2 Plus LTE – DC provides multi-level protection against interference and spoofing attacks – even in the most demanding conditions, whether it's remote locations or moving objects. The system continuously monitors the quality of the radio signal and the connection status of each individual device in the network, with authentication encrypted during each session. Any attempt to disrupt the SAFE Keeper radio protocol frequency channel is immediately detected, switched to a backup frequency, and reported – regardless of whether the protected object is tens or hundreds of kilometers away from you. The hub is protected against unauthorized tampering by a Tamper security contact and in the event of a power failure for any reason, it continues to operate powered by a backup battery for up to 12 hours.

The device is ready for operation almost immediately out of the box. Set up using the ProSafe mobile app and adding detectors by simply scanning a QR code couldn't be easier. Thanks to the clever mounting brackets and included fasteners, assembly itself takes just minutes. Easy installation, flexible configuration and wireless communication make the ProSAFE system highly modular. Its user can therefore expand or adapt his installation at any time to meet current needs and changing individual requirements.