Product Manuals / Accessories

SAFE mount for outdoor motion detectors
SAFE Bracket Outdoor (SAFE 11030)

User Manual

Updated 20. 8. 2026

Product Page
SAFE Bracket Outdoor mounting bracket (SAFE 11030)

Bracket Outdoor – SAFE 11030 is an adjustable mounting bracket designed for outdoor PIR detectors Motion Guard Outdoor and Motion Cam Outdoor. It offers a robust construction with flexible adjustment options for integrators of the SAFE wireless security system.

0–40°detector tilt (to either side)
140 gweight (net)
Aluminumbracket body material
−25 to +60 °Coperating temperature
36 monthswarranty
Easy installation
For indoor installation
For outdoor installation
Flexible installation on both ceiling and wall
H rotation angle – wall mount ±90° / ceiling mount ±180°
Wide range of permissible operating temperature and humidity

Preface

General

This user manual describes the installation, features, and operation of the SAFE mount for outdoor motion detectors (hereinafter referred to as the “bracket”). Before using the device, please read the manual carefully and keep it for future reference.

Safety Instructions

The following signal words may appear in the user manual:

Signal WordMeaning
DANGERIndicates a high potential hazard that, if not avoided, may result in death or serious injury.
WARNINGIndicates a medium or low potential hazard that could cause minor or moderate injury if not avoided.
CAUTIONIndicates a potential risk that could lead to property damage, data loss, reduced performance, or an unpredictable outcome.
TIPProvides methods to help you solve a problem or save time.
NOTEProvides additional information, such as emphasis and supplementary text.

Revision History

VersionRevision ContentRelease Date
V1.0.0First release.August 2026

Privacy Notice

As a device user or data controller, you may collect personal data of others, such as their face, fingerprints, and license plate number. You must comply with local privacy laws and regulations to protect the legitimate rights and interests of other people by implementing measures that include, among others: providing clear and visible identification to inform people of the existence of the monitored area and providing the required contact information.

About the Manual

Important Safeguards and Warnings

This section contains information on the proper handling of the product, risk prevention, and prevention of property damage. Read it carefully before using the device and follow the instructions provided when using it.

Installation Requirements

CAUTION

Compatibility

The SAFE Bracket Outdoor is designed for mounting the following outdoor PIR detectors:

The bracket body is made of aluminum alloy with basic anti-corrosion treatment and a rotating mechanism that allows precise aiming of the detector – horizontal tilt of up to ±40° minimizes blind spots in the protected area. The bracket is suitable for both indoor and outdoor installation – on vertical walls, facades, near entrance doors, or garages – within an operating temperature range from −25 °C to +60 °C.

The detector can be mounted on the bracket in two mutually rotated positions (see chapter Installation) – choose the one that better suits the given installation location.

Package Contents

SAFE Bracket Outdoor Package Contents
  1. Mounting bracket with rotating mechanism – 1 pcs
  2. Masonry wall plugs – 4 pcs
  3. Screws – 4 pcs
  4. QR code label – 1 pcs
  5. Quick installation guide – 1 pcs

Installation

The bracket allows the detector to be mounted on a wall with precise aiming using the rotating mechanism. Before drilling, we recommend temporarily holding the bracket and detector at the intended installation location to verify the detection range and radio signal strength.

Attaching the Detector to the Bracket

  1. Attach the detector body to the top of the bracket by sliding it downward – two mutually rotated mounting positions are available; choose the one more suitable for the given installation location.
  2. Secure the detector with the locking screw at the bottom (maximum tightening torque 0.5 N·m).
Attaching the detector to the bracket – two possible mounting positions
Attaching the detector to the bracket (two possible mounting positions)

Mounting the Bracket on the Wall

  1. Screw the rotating mechanism to the wall mounting plate (4× screw).
  2. Using the holes in the mounting plate, drill 4 holes into the wall and insert the wall plugs (included).
  3. Hold the mounting plate against the wall and secure it with screws (maximum tightening torque 0.5 N·m).
Mounting the wall mounting plate and rotating mechanism on the wall
Mounting the bracket on the wall
The recommended detector installation height is 0.8–1.3 m above the ground.

Adjusting the Detector Direction

The rotating joint allows the detector to be tilted horizontally by 0–40° to either side of the bracket's axis.

  1. Loosen the locking screw in the joint on the side of the bracket.
  2. Rotate the detector to the desired direction (0–40° left or right).
  3. Tighten the locking screw (max. 0.5 N·m) and verify that the detector is securely attached.
Adjusting the detector direction – horizontal tilt 0–40° to either side
Adjusting the detector direction (top view)
Do not tighten the screws with a torque higher than 0.5 N·m – risk of thread damage or cracking of plastic or aluminum parts.

Technical Specifications

Construction
MaterialAluminum alloy
Surface treatmentBasic anti-corrosion protection
ColorSilver
Installation typeWall-mounted (wall)
Detector tilt angle0–40° horizontally, to either side
Max. screw tightening torque0.5 N·m
Dimensions and Weight
Product dimensions94.0 × 73.4 × 55.0 mm
Package dimensions121.0 × 108.0 × 99.0 mm
Weight (net)140 g
Weight (gross)230 g
Environment
Operating temperature−25 °C to +60 °C
Storage temperature−25 °C to +60 °C
Operating humidity10–90 % RH
Intended UseIndoor and outdoor installation
Compatibility and Installation
Compatible devicesSAFE Motion Guard Outdoor (SAFE 38460), SAFE Motion Cam Outdoor (SAFE 38470)
Recommended installation height0.8–1.3 m
General
EAN code0728204235072
CertificationCE
Warranty36 months

Safety Notices

Warranty

The SAFE Bracket Outdoor is covered by a warranty of 36 months from the date of sale. The warranty does not cover defects caused by improper installation, mechanical damage, or failure to follow the instructions in this manual.

If you experience any problems with the device, contact technical support first – most situations can be resolved remotely.

Need Help?

SAFE HOME europe technical support:
Email: info@safe-home.eu  ·  Phone: (+420) 581 222 262
Website: www.smart-safe.eu